SPONSORS
2024 ICRBE EXPO |
Results 1891 - 1920 of 2307
6 years ago
Lynn Behler
1891. Re: saving an old rod
He loves for a reason! great rods. I would strip the blank with citri-strip, lightly scothhbrite it, clean it off, and rewrap it. No finish coat required on these blanks.
Forum: rodboard 6 years ago
Lynn Behler
1892. Re: Cutting graphite.
You should be fine. Wrap the last 1/2 inch with thread and finish to prevent splitting of the blank in the future. Probably didn't hurt it in the first place.
Forum: rodboard 6 years ago
Lynn Behler
Darren, there is a guy located in White Haven, PA that builds custom rods and he rolls his own blanks. They have a website, it's Lehigh Fishing Co. He might be able to help.
Forum: rodboard 6 years ago
Lynn Behler
1895. No epoxy issues here!
I'm sometimes tough on people with epoxy issues, mixed equal parts of part B today - #%it happens.
Forum: rodboard 6 years ago
Lynn Behler
1896. Re: BD classic coat
Thank you very much for the reply Lawrence.
Forum: rodboard 6 years ago
Lynn Behler
This post helped me through a tight spot by pointing out some things I already knew, but was too dense to call to mind! (Fitting a very pesky reel seat). Drywall tape is the only thing for some jobs.
Forum: rodboard 6 years ago
Lynn Behler
1899. BD classic coat
Just got an E-mail from Get Bit which says they have Classic Coat wrap finish (formerly Aftcote) for sale at $15.05 a pint! Seems to good to be true!
Forum: rodboard 6 years ago
Lynn Behler
1900. Recent KR build
Elliot AP7ML blank, Sea Guide XSS Hero reel seat, Fuji Backstop locknut, SS Fuji KLH20 Sic, KLH10 - 5.5 alconite, Pac Bay XF 04 widefoot runners, 7ea., Sic tip, 2 Custom hookkeepers that keep! (thanks Norm). 3 Pac Bay knurled alum. winding checks. Tips the scale at 3.2 oz. All this makes me a happy camper.
Forum: rodboard 6 years ago
Lynn Behler
With 4038 posts he was always ready to be helpful. Our prayers with him and family. Lynn
Forum: rodboard 6 years ago
Lynn Behler
1902. Re: Looking for butt cap
Not sure about sizes, but look at the Pac Bay catalog.
Forum: rodboard 6 years ago
Lynn Behler
I try to make the mot efficient instrument with which to achieve the end purpose, the rest is just eyewash.
Forum: rodboard 6 years ago
Lynn Behler
Take a look at Elliot blanks from Get Rod Blanks. I can't say how they hold up at this point, (early days yet) but I sure like them from a price standpoint. You might be able to view them in person. Not sure of your proximity, but you're a lot closer than I am. Lynn
Forum: rodboard 6 years ago
Lynn Behler
Doug, how much does price influence your blank selection? Can you love a $70 blank, or does it have to cost double that or more to get your attention?
Forum: rodboard 7 years ago
Lynn Behler
1907. Re: Lighting
I do as Phil does, with a 60w clear appliance bulb.
Forum: rodboard 7 years ago
Lynn Behler
I use 4-6 lb. mono. Used fireline for awhile, but sometimes it cut through metallic thread and tended to get a little fuzzy after a while. Will try Tuffline.
Forum: rodboard 7 years ago
Lynn Behler
I use the small pointed medical scissors. Sometimes provided in stitch removal kits. At least that's where I've gotten them.
Forum: rodboard 7 years ago
Lynn Behler
Any issues when using braid pull-throughs with metallic thread?
Forum: rodboard 7 years ago
Lynn Behler
I'm with David here, that's the last place I'd expect a blank would ever break.
Forum: rodboard 7 years ago
Lynn Behler
1914. Re: Micro Spinner
After further review, KR GPS and Fuji static load tutorial are not in agreement on the number of runners. The tutorial advises 10 total guides, which is what looks good to me, so 10 it is. This puts my tip 3.5"or so, from the next guide. Will static test again, but it ain't gonna change much.
Forum: rodboard 7 years ago
Lynn Behler
I'm in the scissors and early tie off loop insertion camp also. Only use blades when I absolutely have to.
Forum: rodboard 7 years ago
Lynn Behler
1916. Re: Micro Spinner
KR calls for 8 guides and tip. I have 9 on it now. When I stress the rod I can hear it saying 10 wouldn't be too many. KL20H, KL10H, KL5.5M, choke/runners size 4 Pac Bay minis. Reduction and choke guides positioned as KR gps recommends. 10 seem like a lot but I can do it.
Forum: rodboard 7 years ago
Lynn Behler
1917. Re: Micro Spinner
I was thinking 4.5" to be the limit.
Forum: rodboard 7 years ago
Lynn Behler
1918. Micro Spinner
Building a 7 ft. spinner, ml 1/16-3/8 oz. lure 6-10lb. line. How far back from the tip would you place your next guide and not consider it to be too far back?
Forum: rodboard 7 years ago
Lynn Behler
If I buy double edge blades I wanna use both edges, gotta invent a shield that allows use of both edges safely. Replaceable blade scalpels are the ticket. Single edge hair trimmer blades are also very good. As for double edge, Feather blades from Japan might be the sharpest of all.
Forum: rodboard |