SPONSORS
2024 ICRBE EXPO |
Results 1921 - 1950 of 2305
7 years ago
Lynn Behler
1921. Re: Acid wraps
My above post is accurate, I can't pin down the year, but it had to have been post 60's. It does indeed refer to the effects of LSD on the builder.
Forum: rodboard 7 years ago
Lynn Behler
1922. Thanks Buzz Butters
Thanks for that link you posted on cord wrap grips, got me out of a tight spot!
Forum: rodboard 7 years ago
Lynn Behler
1923. Mudhole Sucess
Congrats to Mudhole sponsored John Cox 1st, and Brandon Lester 8th, in the Southern Open #2 at Chickamauga. 2 rod builders in the top 10. This get John into the Bassmaster Classic. I love it cause he fishes from an aluminum boat!
Forum: rodboard 7 years ago
Lynn Behler
1924. Re: Acid wraps
I believe someone upon seeing one for the first time made the comment " wow, the guy that built that must have been on acid."
Forum: rodboard 7 years ago
Lynn Behler
Bill, Mark, glad to see you guys posting. Things have been pretty slow around here lately. I guess everybody's fishing but me!
Forum: rodboard 7 years ago
Lynn Behler
Wait, give a guy grief cause he bought a measuring device that doesn't measure!
Forum: rodboard 7 years ago
Lynn Behler
1927. Re: Testers Paint
I would coat it, let it dry/cure, then mask off the blank on either side of the inscription and scuff the gloss lightly with scotchbrite (or similar). Proceed with caution, you just want to knock the shine off.
Forum: rodboard 7 years ago
Lynn Behler
I don't believe a dust mask protects you from chemical fumes.
Forum: rodboard 7 years ago
Lynn Behler
I must apologize to Threadmaster for my above post, I had no intention to drive anyone away from their 2-part finishes. I do however believe that Flex Coat offers a great deal of help to new builders. Where else can you see the owner tell you how to make tools instead of buying them from him? Besides, you gotta love a guy who has a cork stash.
Forum: rodboard 7 years ago
Lynn Behler
1931. Re: thinning epoxy ?
Lots of conflicting opinions here. A lot of well recognized builders thin epoxy.
Forum: rodboard 7 years ago
Lynn Behler
Ken, just read a lot of posts regarding this product and I would suggest you switch to one of the Flex Coat products. Not much love for it out there. (T-1) If you contact Flex Coat and let them know what characteristics you're looking for they'll point you in the right direction. Otherwise you'll spend a lot before you hit on something you like.
Forum: rodboard 7 years ago
Lynn Behler
I was under the impression that it was metallic blue thread that faded quickly. Is this also true for blue nylon?
Forum: rodboard 7 years ago
Lynn Behler
1935. Re: post below
I wasn't concerned about the name thing, just wondered how to contact forum administrators should it be necessary for any reason. Thanks, Lynn
Forum: rodboard 7 years ago
Lynn Behler
1936. post below
When I made the post below I got this message: A word you have used in your post has been banned from use. Please use a different word or contact the forum administrators. The word I used was my own name at the end, (which I wouldn't have needed) however my question is, how does one go about contacting the administrators?
Forum: rodboard 7 years ago
Lynn Behler
1937. Thanks Get Bit
I would like to thank Get Bit Outdoors for the manner in which they handled a problem (though no fault of their own) with my recent order. Kevin, thank you very much.
Forum: rodboard 7 years ago
Lynn Behler
It is always best to add the weight in such a way that it can be easily removed should the rod have to be repurposed. You wouldn't like it for fishing spooks and such.
Forum: rodboard 7 years ago
Lynn Behler
1940. Re: bubbles in my epoxy
Try blowing thru a soda straw over coated wraps to release bubbles. While not recommended by some of the experts, it works quite well. Try not to drool during process!
Forum: rodboard 7 years ago
Lynn Behler
Sorry Rick, should have said rod #2. That's the one that compares with the Diawa I mentioned. I'd like to know the distance you get with the setup you mentioned on that rod. I usually just try to throw it as far as I can with a one hand cast. Approx. distance. Thanks, Lynn
Forum: rodboard 7 years ago
Lynn Behler
Rod #1 Diawa sells a rod that's rated the same as yours for $529,00. It weights 3.7 oz. I'd say ya done good! I'd like to know the actual distance of those test casts (approx.) No one has much to say on that subject. I'm also planning a KR build on a similar blank as soon as I get supplies. Thanks, Lynn
Forum: rodboard 7 years ago
Lynn Behler
1944. Re: Krylon Fusion
I would look to Bill Boettcher for blank painting advice.
Forum: rodboard 7 years ago
Lynn Behler
1947. Re: Fuji
Thanks, thought some of my fellow builders might be faced with the same situation.
Forum: rodboard 7 years ago
Lynn Behler
Mark, I'd check out Tackle Warehouse or similar and see what rods they sell for those baits and go from there. That would get you in the ballpark.
Forum: rodboard 7 years ago
Lynn Behler
A few ft. mono tied to the spool with an arbor knot, braid tied to that.
Forum: rodboard |