SPONSORS
2024 ICRBE EXPO |
Results 1 - 30 of 345
11 years ago
Greg Foy
same deal as other photo of tools to bore out grip for a recessed reel seat.
Forum: rodboard 11 years ago
Greg Foy
I replace the 1/4" drill in the arbor with a 1/4" steel rod, several inches long, that centers the hole saw in the grip. The stops are cut from a pvc pipe and clamped onto the hole saw with zip ties. Put the saw in the drill press or lathe at low speed and use progressively smaller sizes to mortice out the grip.
Forum: rodboard 11 years ago
Greg Foy
My sons shot this rattler. I left the scales on for the look. Burl cork grip with reelseat arbor core.
Forum: rodboard 11 years ago
Greg Foy
8. Striper rod
Burl grip on a nine weight. Feels good! Dark brown thread on a black blank looks good with no cp.
Forum: rodboard 11 years ago
Greg Foy
First fish on a new PacBay Quickline nine weight. 30 feet t-14 and intermediate running line, 2/0 jig hook Clouser.
Forum: rodboard 11 years ago
Greg Foy
10. craigs list find
I stuck with my home made drill lathe for a while. I saw this Jet mini lathe on Craigslist and couldn't resist. Turns out the seller is a fisherman, too, so we hit it off. He makes beautiful bowls on a huge lathe and had no use for this anymore. I got a great deal plus he threw in some tools. Much quieter and smoother than the high speed drill.
Forum: rodboard 12 years ago
Greg Foy
Skateboard wheel bearings are good quality and inexpensive. Adjustable to different mandrel sizes on the drill motor type home made cork lathe, 1/4" mandrel shown. 1/2" rod is the tool rest.
Forum: rodboard 12 years ago
Greg Foy
A 2500 rpm variable speed drill with speed dial on the lockable trigger. The tool rest is 1/2" bar stock.
Forum: rodboard 12 years ago
Greg Foy
13. grip glue up jig
I got tired of those wing nuts on my grip clamp and came up with this. Used a one quart glue gun for subfloor glue. I made shims to fit the glue gun with the hole saw, to put the first ring 2-1/4" from the end of the mandrel so I can chuck it into the home made lathe (drill type shown).
Forum: rodboard 12 years ago
Greg Foy
I cut a 1-1/4" by 1/8" depression, with a forstner bit, in the board to accept the cork rings. Pop the ring in, here I am drilling using a 20mm forstner bit to glue over a 20mm reelseat arbor. The screen over the dust collector is to keep from loosing a ring when I fumble one.
Forum: rodboard 12 years ago
Greg Foy
Natural, mixed, and burnt exotic cork. Two light coats of ca glue, wet sanded. Polyurethane foam reel seat arbor cores in the grip to keep the weight down, from Rodmaker V12 #6. Minima stripping guides and single foot wire running guides.
Forum: rodboard 12 years ago
Greg Foy
Natural, mixed, and burnt exotic cork. Two light coats of ca glue, wet sanded. Polyurethane foam reel seat arbor cores in the grip to keep the weight down, from Rodmaker V12 #6. Minima stripping guides and single foot wire running guides.
Forum: rodboard 12 years ago
Greg Foy
split grip. Gudebrod olive thread, FishHawk jade green metallic, and black.
Forum: rodboard 12 years ago
Greg Foy
I have made a split grip Tennessee sj722 Rainforest 2. I shortened a store bought Tennessee grip, and made a fighting butt for the rod. I used Pacbay Minima match guides and fx zirconia #4 micros.
Forum: rodboard 12 years ago
Greg Foy
23. Rod on dryer
Tennessee grip turning on the rack. Small 6 rpm AC gear motor with PVC end cap and nylon screws.
Forum: rodboard 12 years ago
Greg Foy
24. Messy shop
Rod rack with rod turning after finishing wraps. Light bulbs to help keep it warm. There's a radiant heater overhead, too.
Forum: rodboard 12 years ago
Greg Foy
25. MB843 split grip
Brown burl cork with cherry and Batson exposed reel seat on a closeout plum blank.
Forum: rodboard 12 years ago
Greg Foy
27. isb822.5, nps20
nps20, rx7 isb822.5, 27x Batson y frame & micro guides
Forum: rodboard 12 years ago
Greg Foy
28. isb822.5, nps20
nps20, rx7 isb822.5, 27x Batson y frame & micro guides
Forum: rodboard 12 years ago
Greg Foy
29. isb822.5, nps20
nps20, rx7 isb822.5, 27x Batson y frame & micro guides
Forum: rodboard 12 years ago
Greg Foy
30. isb822.5, nps20
nps20, rx7 isb822.5, 27x Batson y frame & micro guides
Forum: rodboard |