SPONSORS
2024 ICRBE EXPO |
using hole saws to inlet reel seat
Posted by:
Greg Foy
(71.139.164.---)
Date: January 24, 2013 12:29AM I replace the 1/4" drill in the arbor with a 1/4" steel rod, several inches long, that centers the hole saw in the grip. The stops are cut from a pvc pipe and clamped onto the hole saw with zip ties. Put the saw in the drill press or lathe at low speed and use progressively smaller sizes to mortice out the grip. Sorry, only registered users may post in this forum.
|