SPONSORS
2024 ICRBE EXPO |
grip glue up jig
Posted by:
Greg Foy
(71.139.177.---)
Date: April 14, 2012 02:31PM I got tired of those wing nuts on my grip clamp and came up with this. Used a one quart glue gun for subfloor glue. I made shims to fit the glue gun with the hole saw, to put the first ring 2-1/4" from the end of the mandrel so I can chuck it into the home made lathe (drill type shown). Sorry, only registered users may post in this forum.
|