SPONSORS
2024 ICRBE EXPO |
drilling cork rings
Posted by:
Greg Foy
(71.139.177.---)
Date: April 14, 2012 02:22PM I cut a 1-1/4" by 1/8" depression, with a forstner bit, in the board to accept the cork rings. Pop the ring in, here I am drilling using a 20mm forstner bit to glue over a 20mm reelseat arbor. The screen over the dust collector is to keep from loosing a ring when I fumble one. Sorry, only registered users may post in this forum.
|