I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods


Pages: 12345...LastNext
Current Page: 1 of 59
Results 1 - 30 of 1744
14 years ago
Jay Hunt
Cut the reel foot off an old plastic reel body, squared it up,leveled it,then epoxied a string level on top of it. With this tool you can set the guides,wrap them and never remove the level.
Forum: rodboard
14 years ago
Jay Hunt
The Cobra Handle System fits nicely to the forarm and secured with a velcro strap when necessary.
Forum: rodboard
14 years ago
Jay Hunt
notice the small cutout in the grip to accomodate the wrist brace.
Forum: rodboard
16 years ago
Jay Hunt
Brother-in-law's Spinning rod.
Forum: rodboard
16 years ago
Jay Hunt
Green Texelium Tenn. Handle. Reel wrapped on with Black "E" Gudebrod. Pac Bay Silver Metallic Trim Bands. All built on a 7' med. power Green blank from Mudhole.
Forum: rodboard
16 years ago
Jay Hunt
Barrel sinkers epoxied inside a portion of a 25-06 rifle case.Insert into last cork ring/butt cap,about 1/16" below flush,cover end of polished case head with clear epoxy.Rod Bond the case into the butt of rod blank,,at the same time gluing up the butt cap.
Forum: rodboard
16 years ago
Jay Hunt
Rifle case with lead weight epoxied inside. Fits inside butt of blank and last cork ring.
Forum: rodboard
16 years ago
Jay Hunt
This wrap was a bugger trying to get the sacrificial thread off the ramp without disturbing the other thread.
Forum: rodboard
16 years ago
Jay Hunt
My first attempt a a hollographic wrap.
Forum: rodboard
16 years ago
Jay Hunt
Thread tensioner set up.
Forum: rodboard
16 years ago
Jay Hunt
Plastic washers , Metal washers, Spring , Paper clip.
Forum: rodboard
16 years ago
Jay Hunt
No forgrip, just one ring of brown burl cork and epoxy ramp.
Forum: rodboard
16 years ago
Jay Hunt
Rainshadow CB66MH with Cobra Handle System.
Forum: rodboard
16 years ago
Jay Hunt
Had to make an oval shaped cutout in the grip to accomodate a wrist brace.
Forum: rodboard
16 years ago
Jay Hunt
Cobra Handle is made for either right or left hand Built this rod for my younger brother with a bad wrist.
Forum: rodboard
16 years ago
Jay Hunt
One ring of burl and an epoxy ramp.
Forum: rodboard
16 years ago
Jay Hunt
Made this little cutter from a closet rod bracket. Filed a cutting edge on it and use it like a biscuit cutter.
Forum: rodboard
16 years ago
Jay Hunt
Purple Nylon "A" with CP. Met. Silver trim
Forum: rodboard
16 years ago
Jay Hunt
Purple wraps with Met Silver trim and Silver decal.
Forum: rodboard
16 years ago
Jay Hunt
Light gray 8" EVA grip with Chartruse and Purple checkerboard inlays and purple EVA grip cap.
Forum: rodboard
16 years ago
Jay Hunt
Purple Mudhole Blank built as Spin Cast. Lt Gray EVA with green and purple checherboard inlays.Purple Gudebrod "A" wraps with Met Silver trim.
Forum: rodboard
16 years ago
Jay Hunt
Pink blank,Hot Pink wraps with Silver Metallic trim. Gray EVA grips with pink,purple and light gray trim rings.
Forum: rodboard
16 years ago
Jay Hunt
Spinning Handle and fore grip made from Cottonwood Bark with rubberized cork accents and a Mike Barkley Custom Acrylic #16 reel seat.Handle finish is 4 coats of wood sealer and 8 hand rubbed coats of Tru-Oil.
Forum: rodboard
15 years ago
Jay Hunt
Fugi NPS-18 seat shortened on each end.
Forum: rodboard
17 years ago
Jay Hunt
Modified old Sears wood lathe to turn rod handles.
Forum: rodboard
17 years ago
Jay Hunt
Modified old wood lathe to turn rod handles.
Forum: rodboard
17 years ago
Jay Hunt
Modified old Sears wood lathe to turn rod handles.
Forum: rodboard
17 years ago
Jay Hunt
Rebuilt old Sears wood lathe for turning rod handles.
Forum: rodboard
15 years ago
Jay Hunt
Commercial floor tile samples used as trim rings.In this grip there are 4 rings ,Black , Grays and White. Any Carpet Shop has boxes of tile samples. Salesmen give them to them.
Forum: rodboard
3 years ago
J.B. Hunt
swampland Tackle has it.
Forum: rodboard
Pages: 12345...LastNext
Current Page: 1 of 59

Webmaster