SPONSORS
2024 ICRBE EXPO |
Results 1 - 30 of 156
9 years ago
Doug Cox
<p>Attachment to use a 4 oz. spool on the Renzetti carriage</p>
Forum: rodboard 9 years ago
Doug Cox
<p>Attachment to use a 4 oz. spool on the Renzetti carriage</p>
Forum: rodboard 10 years ago
Doug Cox
Trimmed out with 2.5 inch moulding. Total install time was 2 hours. The flooring is a very cheap fix for a worn work surface.
Forum: rodboard 10 years ago
Doug Cox
6. benchtop_1
I wanted to update my benchtop with a lighter color. After a short search, I decided on using a thin laminate flooring. Very little cutting was needed and was a quick install.
Forum: rodboard 10 years ago
Doug Cox
I added a couple of tubes so it would also hold the large Roddancer syringes.
Forum: rodboard 16 years ago
Doug Cox
13. New Work Top
Finally took the time to build a sturdy work bench. The work bench is 2 ft. wide and 16 ft. long. Also working on lighting and a few shelves.
Forum: rodboard 17 years ago
Doug Cox
15. 5wght
Austin 5 wt with a Alps reel seat...replaced the wood reel handle with a homemade cork one.
Forum: rodboard 18 years ago
Doug Cox
The black wheels are the prototypes I started with...made out of 1/4 inch Lexan.
Forum: rodboard 18 years ago
Doug Cox
The wheels are 2 inches in diameter and 1/4 inch wide with a ball bearing for easy rotation. They were machined out of flat stock.
Forum: rodboard 19 years ago
Doug Cox
I fill the space between the hoods with cork tape turned sideways and trimmed to fit..held in place with contact cement. The blank under the tape fore grip is built up to make the tape even with the end of the reel seat..results in a very comfortable seat.
Forum: rodboard 19 years ago
Doug Cox
I painted the Fuji seat and the side plates on the reel to match each other...top coated with spar urethane. Paint job is around 5 years old.
Forum: rodboard 19 years ago
Doug Cox
I attached a old fly vise to the center shaft of my homemade dryer. It works great for smoothing the finish on flys or lures.
Forum: rodboard 19 years ago
Doug Cox
30. Almost twins
A Breakaway 1418 and a 1509 with Jimi's decals
Forum: rodboard |