SPONSORS
2024 ICRBE EXPO |
Results 1 - 30 of 188
5 years ago
Ryan McBride
The RainShadow SW967F is a good suggestion. Specs for this blank can be found here:
Here are two other blanks that would work well for your application:
BP1025F -
REVSU90M -
Forum: rodboard 8 years ago
Ryan McBride
Craig Clements Wrote:
-------------------------------------------------------
> I've never handled one, but Rainshadow has a
> RX6/E-Glass composite travel blank that is rated
> 1/4 - 3/4 with mod fast action, but it's 3 piece
> not 2.
>
> Craig
This will work great for your application! We love the versatility of the rod blank as well as the combination of sensitiv
Forum: rodboard 8 years ago
Ryan McBride
Randy Weakley Wrote:
-------------------------------------------------------
> Nick if you're still following this, I talked to
> the guys at Batson, and they recommended the
> RCLB79ML as a jack of all, master of none. We'll
> see how it works out. If nothing else I can use
> it as a live bait/surface iron chunker (depending
> on how the reel casts). And there's alway
Forum: rodboard 8 years ago
Ryan McBride
Randy Weakley Wrote:
-------------------------------------------------------
> Nick if you're still following this, I talked to
> the guys at Batson, and they recommended the
> RCLB79ML as a jack of all, master of none. We'll
> see how it works out. If nothing else I can use
> it as a live bait/surface iron chunker (depending
> on how the reel casts). And there's alway
Forum: rodboard 8 years ago
Ryan McBride
Check out the video on our page.. Then see if the RainShadow Knife Jigging blank is up your alley.
Forum: rodboard 8 years ago
Ryan McBride
Randy your going into the right direction. As in terms of trying to pull something off the bottom, what are you going for?
We have had very successful clients fish in the California market with our entire lineup. If you want to talk to someone here in the office, please call 877-875-2381 and speak to sales.
Thank you,
Forum: rodboard 8 years ago
Ryan McBride
Decal Connection is very good. Chuck and Debbie will get you set up!
Forum: rodboard 8 years ago
Ryan McBride
Just to let you know, the guide is an ALPS F Guide in a size 5
We do however have PMK mini guides in smaller sizes
Forum: rodboard 8 years ago
Ryan McBride
The ALPS Chuck was intended to do exactly what your asking for. A lathe would be nice, but it really depends on how much turning your planning on doing. Also there is tools to add to the ALPS Chuck for turning as well.
Forum: rodboard 8 years ago
Ryan McBride
12. Re: Lathe type
If your looking at a lathe but don't want to spend the money..
You could get an ALPS power wrapper with the Upgraded chuck included. Then the new tools that ALPS just released allows for ease of use turning cork and eva.
Forum: rodboard 8 years ago
Ryan McBride
Hi Casey,
We have a plethora of blanks and components to fit your needs.
Here is a start:
Need components?
Forum: rodboard 8 years ago
Ryan McBride
Hi Casey,
We have a plethora of blanks and components to fit your needs.
Here is a start:
Need components?
Forum: rodboard 8 years ago
Ryan McBride
Here are the specs of the RainShadow SW967F in case!
SW967F Matte Gray 8'0" 2 15-25lb. 3/4-4oz. 0.635 7.0 MOD-F M 4.2oz.
Forum: rodboard 8 years ago
Ryan McBride
We have plenty in stock and ready to get to you! ALPS Short Curved butts! Unfortunately none are for 80#. The 4 series is what you want, but we only have them in the long version.
Forum: rodboard 8 years ago
Ryan McBride
Our blanks are not only tough, but also over engineered in a great way!!
For a Halibut rod 2 rods would do nicely for you:
RTCB56XXH - Fast Action
FSU56XXH - Mod Action
Forum: rodboard 8 years ago
Ryan McBride
Robert Metzger...
Just to make sure.. Batson Enterprises is the Main brand company that sells RainShadow rod blanks..
Carol works at Utmost Enterprises which is a retail store that buys RainShadow Rod blanks.
Just making sure people are clear..
Thank you everyone for your support!!
Forum: rodboard 8 years ago
Ryan McBride
Really hard to beat that RainShadow SW967F!
Iam currently going to build this exact rod for not only bass travel rod, but also as an inshore rod as well!!
Forum: rodboard 8 years ago
Ryan McBride
Well we use Dyna-tek on our rods and they seem to not ice up at all. Might want to call in and try some?
Forum: rodboard 8 years ago
Ryan McBride
We are just a phone call or email away! :) You just have to make the first move ;)
Forum: rodboard 8 years ago
Ryan McBride
23. Re: G-Looms
If you need any help with RainShadow or NFC blanks, please do not hesitate to ask or call us!
Forum: rodboard 8 years ago
Ryan McBride
John,
How about you come up to Sequim, WA and pull on all of our blanks and you can choose! We are right next to the hood canal bridge! Probably only 30 min or so.. We have several blanks that will work, but best to just come out and see yourself. We have rods even built that you can full test.
Mike Thorson, Rod Designer, Can even work with you when you stop by..
Hope to see you!
Forum: rodboard 8 years ago
Ryan McBride
Hi Marty and all,
Thank you for everyones questions. The RainShadow Eternity2 is the only blank that has a carbon scrim. If you have any questions on any of our blanks and how they perform etc.. Please call in and speak with our sales staff. We will help anyone with any questions that might come up.
Forum: rodboard 8 years ago
Ryan McBride
Although thank you for wanting a RainShadow Immortal rod blank, this would be a great build for you. I would suggest building on a cheaper blank to get used to it. Many of our customers love these 2 models that will give you similar properties as the Immortal Popping blank.
Intermediate modulus
Standard modulus
Components:
Its your choice. No wrong or right answer. Just depends on b
Forum: rodboard 8 years ago
Ryan McBride
Click the "blueprints" tab to get an idea or starting point as well! Good luck!
Forum: rodboard 8 years ago
Ryan McBride
30. Re: Warranty
For RainShadow rod blanks.. Please read the warranty information. Im sure you won't have any problems. If you do, we are always here to help.
Forum: rodboard |