SPONSORS
2024 ICRBE EXPO |
Results 151 - 180 of 389
13 years ago
Rolly Beenen
I was asked to replace the guide by a tackle store instead of going through all the return shipping charges on a 100 dollar rod. I don't have the rod in hand but I could get some numbers if you wish Alex. Looks like I will be telling the owner of the store to SEND IT BACK.
Forum: rodboard 13 years ago
Rolly Beenen
Jim
Do you know where I may get a replacement guide for this rod? Looks like a size 8 fly guide.
Forum: rodboard 13 years ago
Rolly Beenen
Does anyone have any idea who is the supplier of the guides for the Abu Garcia Veritas rods. They are Ti alloy with SIC rings but they seem to be thin rings?
Forum: rodboard 13 years ago
Rolly Beenen
I like the 10 min rod bond or threadmaster or probond as you glue up a rod, Then wrap another rod. By the time you have wrapped the second rod the first rod is ready to wrap.
There will always be a bit left on your tinfoil sheet. Use that as a test piece to see if it is set yet.
Forum: rodboard 13 years ago
Rolly Beenen
I would say that it is mostly fresh water stuff in comparison to the Salt. Each dealer will bring the whole deal out so there will be as much fresh as salt shown. I don't think you could handle as many fresh water blanks as there will be there in the 3 days.
Forum: rodboard 13 years ago
Rolly Beenen
156. Inserts by Les
Does anyone know if Les is still around? His web site is gone and I was looking for an insert for an A8 fly seat. Does anyone of the sponsors offer inserts for an A8 seat in Black Hardware?
Forum: rodboard 13 years ago
Rolly Beenen
157. Re: Mudhole
If you have an wholesale account with them it is the rate they charge for shipping. I guess you did not check off any of the other methods of shipping available.
Forum: rodboard 13 years ago
Rolly Beenen
Does the wrap have CP on it? One of th erods I did use CP on i have the same problem I think there was cp extended beyond where the Glass Coat went. When the CP wore off of the blank it caused a slight crack which allows moisture to get underneath the epoxy
Forum: rodboard 13 years ago
Rolly Beenen
Hank I don't see where I had mentioned anything about where I am from had anything to do with putting CP on NCP. Keep up the arrogance Yank.
Forum: rodboard 13 years ago
Rolly Beenen
160. Z shaped Handle??
Hi
I remember seeing an ad for a Z shaped handle or rear grip for people with arthritis in their wrists. Does anyone remember where or which sponsors has them?
Forum: rodboard 13 years ago
Rolly Beenen
I have been having a problem getting my magazines. I have missed the past 3 issues. I have tried to contact Customtackle.com to rectify this or to see if they were out of biziness but to no avail. Has anyone else had trouble getting their magazines or making contact with Custom tackle? I have sent them 3 emails and a phone call still no answer.
Forum: rodboard 13 years ago
Rolly Beenen
No I don't think it is snotty. It is a fact as I don't use NCP thread, I very rarely use CP and I would not put CP on NCP thread.So in that way I am different then you
Forum: rodboard 13 years ago
Rolly Beenen
163. Re: Oops!
What type of seat other then it may not feel right to you there is no wrong way for a spinning seat.
Forum: rodboard 13 years ago
Rolly Beenen
Beg your pardon but how does putting CP on hold guides before wrapping? What would move and if a guide did move you align before epoxy anyways. Just do not see any reason to put Cp on NCP thread. just a waste of time and of money to me. Maybe I am different then you ?
Forum: rodboard 13 years ago
Rolly Beenen
Why would you put CP on NCp thread. Thats why you bought NCP in the first place.
Forum: rodboard 13 years ago
Rolly Beenen
All the folks at Mudhole treat everyone with great service. They go out of their way to make sure it's right or they will fix it.
Forum: rodboard 13 years ago
Rolly Beenen
Mudhole don't have any and american tackle is in the same location.
Forum: rodboard 13 years ago
Rolly Beenen
American Tackle no longer has a supplier for these handle systems. I am looking for 2 of the 14" black spinning kits if any of the suppliers have one in their stock or if anyone has one in their shop. Please let me know.
I will be posting this in the buy/sell page also.
Forum: rodboard 13 years ago
Rolly Beenen
It would be nice to have a wholesale/ dealer here in Canada. Sure would cut down on the shipping and duty charges.
Forum: rodboard 13 years ago
Rolly Beenen
I was using the unsanded Mudhole blanks and cutting them to lenght and power that I wanted.
Forum: rodboard 13 years ago
Rolly Beenen
First off what type of fish are you using these rods for? If you are talking about blue gills and perch or maybe little walleye I would agree with Roger. But if you are after large lakers or large walleye in the 6-15 lbs range then I would be going to a hollow graphite instead . The rods I build are 30 to 36" long.
Forum: rodboard 13 years ago
Rolly Beenen
What style and type of guides do you Salt guys recommend for a spinning rod used for Strippers off of a private boat. Having never fished in the ocean I have no idea.
Forum: rodboard 13 years ago
Rolly Beenen
Yeah well its not for Billy Bob to decide. Not much feedback on this blank??
Forum: rodboard 13 years ago
Rolly Beenen
To any angler fishing bass tournaments the rod is nothing but a tool. Replacing the rod is nothing but a cost of competitive fishing as is Senko's, line etc. Just replace the rod and be happy.
Forum: rodboard 13 years ago
Rolly Beenen
HI
I am looking for a recommendation for a blank similar to the 4M86HF blank from St Croix. Has anyone used the Rainshadow lineup for this application? What about a swimbait rod that 8'6" in length that can throw 6-8 oz sling blades.
Forum: rodboard 13 years ago
Rolly Beenen
Have to get Bill up to Canada to do a little Bay of Quinte ice fishing. That will teach him a new trick or two.
Forum: rodboard |