SPONSORS
2024 ICRBE EXPO |
Results 211 - 240 of 261
14 years ago
mike brune
212. Reels
Hi
I have been thinking about supplying reels and line with my rods. I've had some customers ask about reels and some just wanting a reel. I would like to know where you all buy your reels. I would like to get most all brands at one place, wholesale. Spinning,casting and fly reels
Thanks
Mike
Mikes Custom Fly Rods
Forum: rodboard 14 years ago
mike brune
I second the the crappie rod blanks and would like to see a 7.5 ft 1 and 2 wt Matrix fly blank so I dont have to make them longer. I use them for extreme ultra spinning and a 1 wt. would be awesome fun.
Mike
Mikes Custom Fly Rods
Forum: rodboard 14 years ago
mike brune
214. Reel seat end caps
Hi all,
What does everybody do with all of your extra end caps that come with reel seats when you make your own and don't use the stock one. Any ideas would be appreciated. Other than file 13.
Thanks
Mike
Mikes Custom Fly Rods
Forum: rodboard 14 years ago
mike brune
Hi, Scott
Mike here, turning the 11/8 in. stock on my wood lathe was kinda slow but it did work. All I used were my wood tools. I'm trying to come up with something to hold smaller bits. Thing about epoxying and pinning a steel sleeve into a wood handle to insert the bit into and hold the bit in with set screws. I used a standard tool rest. The rod was for myself but a coworker I showed it to ga
Forum: rodboard 14 years ago
mike brune
Hi Tim,
There is a book "Fenwick" by Victor R. Johnson, Jr($24.95). This book was published in 2005, 180 pages of info.
Mike
Mikes Custom Fly Rods
Forum: rodboard 14 years ago
mike brune
Hey, Tony
Try spacitywoodworks.com
Mike
Mikes Custom Fly Rods
Forum: rodboard 14 years ago
mike brune
219. Rod extension
Tom,
I read your article on extending rod blanks, what I would to know is what wall thickness of aluminum tubing to use on light weight rods being extended 12 inches.
Thanks in advance
Mike
Forum: rodboard 14 years ago
mike brune
Hey, Michael
I built a rod for a customer that saw the In Fisherman article. I ended up using a forecast RX6 6'6" 2 wt. fly blank and added 12" to the length. I used amtak concept guide set. The rod can cast very well but after landing a 8 pound catfish in testing with customer permission, I would really would like to try a 1 wt. on his next rod,oh well, not to be. Can castup to 20 - 2
Forum: rodboard 14 years ago
mike brune
221. 1 wt. blanks
Hi,
Does anybody know anyone who makes 2 piece 1 wt. fly rod blanks?
Under 60 bucks.
Mike
Forum: rodboard 14 years ago
mike brune
Hi, Tom
I,m casting 1/80 of an ounce 20 - 30 ft. with a palsa float also.
Mike
Forum: rodboard 14 years ago
mike brune
223. 1 wt. fly rod blanks
Hi,
I am looking for 61/2 to 8 ft 2 piece 1 wt. fly rod blanks priced under $60, but am having trouble finding any. Can anyone make some suggestions I have already looked at the board sponsors. Any help would be appreciated. They will be used for extreme ultralite spinning rods. I built one on a 2 wt. but would really like to try a 1 wt.
Thanks
Mikes Custom Fly Rods
Forum: rodboard 15 years ago
mike brune
Hi, Lane
I have built a couple on the RX6 and have no complaints, had a customer pick one over a RX7 ,personally I like the RX7 better they are a little faster.
Either one will give you a great rod at a great price. Shop the different suppliers prices do vary.
Mike
Mikes Custom Fly Rods
Forum: rodboard 15 years ago
mike brune
Hi, Roger
No, we will be slow trolling with about 3 feet between rod tips.
Forum: rodboard 15 years ago
mike brune
Hi, all
I need to know what rod blanks everybody likes to use for crappie spider rigs. I want 12 footers 2 or 3 piece and will be pushing 1/32 oz. jigs four on each side of the boat.
Thanks for the help
Mike
Mikes Custom Fly Rods
Forum: rodboard 15 years ago
mike brune
227. Re: Customer reject
Hi, David
That is one beautiful grip. Can't you fill the worm holes and any other areas enough to smooth the hole grip. I would build it anyway somebody is sure to buy it. Or donate it to a fund raiser.
Mike
Mikes Custom Fly Rods
Forum: rodboard 15 years ago
mike brune
Hi all,
Til now I have been building fly rods. I need to know what brand of blank for spinning and casting for bass can compete with hi dollar fenwicks or loomis ect. for under $ 75.00. I'm going to be coming up with some quotes the next couple weeks and don,t know much about these kind of blanks.
Thanks
Mike
Mikes Custom Fly Rods
Forum: rodboard 15 years ago
mike brune
229. Lamiglas fly blanks
Hi, all
I would like to know who makes fly blanks made in the U.S.A priced between 50 and 150 $. I already know St.Croix and Lamiglas.
But who else is there if any.
Mike
Forum: rodboard 15 years ago
mike brune
Ok guys,
What can you old pros tell me about the following blanks?
Fenwick Boron X 8.5 FT. 6 F
Fenwick HMG GFL 8 FT 6 F
Fenwick HMG GFL 7.5 FT. 6 F
Fenwick HMG GFL 8.5 FT. 8
Fenwick HMG 9 FT. 4 T
Fenwick HMG GFL 7.5 FT. 6WT.
I bought 7 blanks for $175, should I buy the other fifteen blanks for the same price $25 each?
The boron x I already cast 75 ft with nothi
Forum: rodboard 15 years ago
mike brune
Hi, Mike
I like bang for the buck, and the Batson Rainshadow RX7 gives that without the big cost. They are med-fast action and cast very well.
Mike @
Mikes Custom Fly Rods
Forum: rodboard 15 years ago
mike brune
232. Re: 12wt Blanks
Hi, Dennis
I built a 9wt.rod on a Tiger Eye blank and went salmon fishing and was very impressed that it could bend like that and not break. Schneider's Rod Shop also carry these blanks. I also built a 6/7 wt. and it casts very well.
Mike
Mikes Custom Fly Rods
Forum: rodboard 15 years ago
mike brune
233. Re: Cork
Hi,
I would rather have cork with character. Personally I think it produces a much cooler looking handle.
Mike
Mikes Custom Fly Rods
Forum: rodboard 15 years ago
mike brune
Hi, Andrew
I just built a 6 wt. on a Matrix blank and had a friend test cast for me since I sometimes have trouble getting 70 ft. He was able to cast all the way down to the backing 90 ft. He's been building rods 20 years and said its the best rod he felt this year ( 2008 ). Hope this helps. They are a good looking rod blank.
Mike
Mikes Custom Fly Rods
Forum: rodboard 15 years ago
mike brune
Hi all
Just now cancelled my room at the Raddison. Cant go do to heart trouble, hope to see everybody next year.
Mike
Mikes Custom fly Rods
Forum: rodboard 15 years ago
mike brune
236. Re: Photo Board
Hi, Billy
I checked to make sure the size was changed each time I have tried to upload photos. I'm at a loss.
Mike
Forum: rodboard 15 years ago
mike brune
237. Re: Photo Board
Hi ,everyone I have shrunk pics down to 524 x 155 and still get the message that Internet explorer cannot display webpage.
Mike
Mikes Custom Fly Rods
P.S. Never had trouble before. There has to be a kink somewhere for so many to have trouble all together.
Forum: rodboard 15 years ago
mike brune
Hi,
Something definitely is not working right, I get the same message.
Forum: rodboard 15 years ago
mike brune
Hi, Rob
Don't know about titanium Ihope they don't just built a 12 wt with them but REC recoils on a ro I just built do, very annoying.
Mike
Mikes Custom Fly Rods
Forum: rodboard |