SPONSORS
2024 ICRBE EXPO |
Results 31 - 60 of 1904
18 years ago
Fred Yarmolowicz
31. Red EVA
Red EVA with a Mesh Graphite seat insert.A rebuilt rod for a friend
Forum: rodboard 18 years ago
Fred Yarmolowicz
33. Thread box
Plastic bobbin box with metal bobbins.I used latex tubing to prevent fuzzies
Forum: rodboard 18 years ago
Fred Yarmolowicz
Wrapped on a surf rod that was PHAT.Like the glutton for punishment that I am it was all size A one thread at a time!!!
Forum: rodboard 18 years ago
Fred Yarmolowicz
35. yellow spider
The other end of the next wrap pictured(can never remember to wait for the description till the last photo)
Forum: rodboard 18 years ago
Fred Yarmolowicz
36. Yellow spider
Wrap done as something to kill the couple of weeks before the show
Forum: rodboard 18 years ago
Fred Yarmolowicz
37. 100k post Rod
Here the rod I built with Rays handle.Its a G Loomis Mag Bass Mahogany blank.1st try at a fade in the butt wrap.
Forum: rodboard 18 years ago
Fred Yarmolowicz
Before and after photos of a friends rod that he got at 15 years old(now 47).It had some taped on guides and reel.The cork is original the seat is a replacement.He wanted the old metal ring guides,in other words "old school".it was a South Bend,The reel is next.
Forum: rodboard 18 years ago
Fred Yarmolowicz
This is butt wrap on the G-Loomis Mahogany blank that is fitted with the Custom wood handle supplied to RBO for the 100,000th post.Thank You again Ray.
Forum: rodboard 18 years ago
Fred Yarmolowicz
40. Marble Addiction
Here`s what happens when the bottle of Cabo Wabo Tequila is too close and you mix too much epoxy,The phone has a nice purple pearl as the top coat.
Forum: rodboard 19 years ago
Fred Yarmolowicz
I used Putters idea to practice on a pen and it spilled over onto the cell phone(the stuff is addicting).
Forum: rodboard 19 years ago
Fred Yarmolowicz
44. 3rd rod
looking back a few years and realized this was the 3rd rod I wrapped.Still havent done the butt wrap,too busy fishing the rod and building others(lesson learned?dont fish it until it is completely finished)
Forum: rodboard 19 years ago
Fred Yarmolowicz
45. Canal rod
The wraps on the rod used for stripes in the Pt.Pleasent canal.
Forum: rodboard 19 years ago
Fred Yarmolowicz
46. Blue AmTac
Blue AMTAC guide on Honey Lamiglass trimmed with halo trim thread.The blue and grey match my boat.Scuffs on finish after a season of hard fluke fishing.
Forum: rodboard 19 years ago
Fred Yarmolowicz
Halo guide wrapped in purple with yellow underwrap and orange trim rings.Matches my buddie`s custom truck.
Forum: rodboard 19 years ago
Fred Yarmolowicz
Marbled guide wrap with gold and silver metallic.Am Tac gold ring guide.
Forum: rodboard 3 years ago
Fred Yarmolowicz
Wrapped a rod ten ago with Madeira on the guides and it held up just as well as any rod wrapping thread. Used CP of course
Forum: rodboard 3 years ago
Fred Yarmolowicz
Ask your friend what method he uses. Dragging bait vs jigging is two entirely different blanks. Also water depth will make a difference. Fishing from private boat or a head boat ?
Forum: rodboard 3 years ago
Fred Yarmolowicz
I use a spatula. Learned from the one and only Ralph O’Quinn how to do it. Faster and cleaner than a brush.
Forum: rodboard 3 years ago
Fred Yarmolowicz
Billy Vivona Wrote:
-------------------------------------------------------
I purchased the last batch of
> this and I still use it and have about 40 ounces
> of it left.
Billy 40!
Forum: rodboard 3 years ago
Fred Yarmolowicz
A butane or propane torch works for me . Just need to keep the distance far enough away. You can also see the flame unlike alcohol. There are models that turn off and on by pressing and holding a button and releasing it when you are dome. That is of course if propane or butane is not banned there also .
Forum: rodboard 4 years ago
Fred Yarmolowicz
Billy is too nice to be from NJ .
Where do you flounder fish ?
Forum: rodboard |