SPONSORS
2024 ICRBE EXPO |
Results 61 - 90 of 349
13 years ago
John Sams
Keep it off the ferrule or the rod pieces may come unstuck while fishing.
Forum: rodboard 13 years ago
John Sams
Now even more are saying they got a GOODY PACK? Are these not samples or give aways? If you are a newbie I would at least write to Diamond II and ask for the goody pack and see what you get. If you like it stick with it if not you can try another.
Forum: rodboard 13 years ago
John Sams
It was not in an E-mail it was on a west coast rod message board. But in answer to Mike I think both finishes are good if you follow the directions and use them with common sense.I do not see that much difference in them.
Forum: rodboard 13 years ago
John Sams
OK thanks. I read it on another message board where guys could get sample for asking. Not here.
Forum: rodboard 13 years ago
John Sams
66. Re: rod blanks
Maybe match them against line class blanks you already have and know for sure?
Forum: rodboard 14 years ago
John Sams
They used to make spun aluminum fishing rods. The blank was actually spun aluminum..
Forum: rodboard 14 years ago
John Sams
I have talked to Ralph and known Roger so I know these are good people who want to help all the rod builders. They are not trying to just sell more finish by saying to mix more finish.
Forum: rodboard 14 years ago
John Sams
78. News Article
There is a good article on the rod building expo in the new copy of Flyfishing in Saltwater. Check it out.
Forum: rodboard 14 years ago
John Sams
OR buy a rod with larger guides that we already know works and not have to worry about any freezing issues with the mirco guides??
Forum: rodboard 14 years ago
John Sams
NHow have they proven to have superior performance?? What is superior about them?
Forum: rodboard 14 years ago
John Sams
I think the best method is the one that is easiest and does not cause any cracking?
Forum: rodboard 14 years ago
John Sams
Anybody that is not going to buy Northfork blanks really has no beef to start with.. If you do not like the prices there are other companies making blanks you can buy. Sometimes the people who bark the loudest are ones that were not going to be customers anyway.
Forum: rodboard 14 years ago
John Sams
The first two numbers are for length mostly. Then power and then number of pieces. But you would have to have the mfg. catalog for the specs on power and casting weights.
Forum: rodboard 14 years ago
John Sams
Everybody and their brother has become a blank designer. If you say that you want more power or a softer tip that is enough to make you a blank designer. I wonder what people like Gary Loomis or Jason Bruner at Croix are? They must be at another level of designer?
Forum: rodboard 14 years ago
John Sams
88. Highpoint show
Is it possible that the expo has got TO LARGE?? To much to see in a couple days and to many people there??
Forum: rodboard 14 years ago
John Sams
Looks like the same specs as what Mudhole has on their sight. Probably the same blanks??
Forum: rodboard |