Then again the single foot will weigh a lot less!!
Forum: rodboard

If you can find out what size line he will be using you may be able to figure what reel he will use?? Then if you can borrow one to set it up??
Forum: rodboard

Because it will penitrate better. You can over do it. Got to find the happy medium
Forum: rodboard

Get some thick candles. Then you can use both your hands???
Forum: rodboard

I wet and then ty on rubber bands
Forum: rodboard

AAh You mean resolutions. Do more fishing
Forum: rodboard

Hay Putter , are you mellowing out?? You sound calm
Forum: rodboard

Thanks John Thanks John Thanks John LOL I took a trip tp Home Depot todat and found some what is called connecting bolts and connecting nuts. The nuts are 3/4 of an inch long and have ribs on them witch should be good for grabing the epoxie well. About 7/16 OD Fit 1/4" bolts nice and very light. Found them in Specilty nuts and bolts section These should work real nice
Forum: rodboard

Unless it's the new format, but you should get ( a lot ) of info with Painting Blanks or Refinishing Blanks
Forum: rodboard

Putter; that was happening to me until Tom fixed it. What I had to do was post, then the message came up, hit the back button, then just refresh the page or hit the Forum list, and my post came up
Forum: rodboard

I can under stand. Like the Pay Pal thing. But as soon as one starts asking questions and they go By BY, O well Not on the up and up. He never gave me a chance
Forum: rodboard

I'll drink to that Happy New Year
Forum: rodboard

Just wanted to wish every one a very Happy New Year Great board Tom thanks
Forum: rodboard

Happy New Year Neil, those blanks came yesterday Thanks
Forum: rodboard

Just looking around and noticed Pac Bay has some nice aluminum threaded butts? And Inserts that go into the handle or seat?
Forum: rodboard

If there are any numbers or info on the blank you want to match, put them up here and I am sure some one knows what will be a close match or have some in the corner
Forum: rodboard

Gregg: I was thinking of that myself. Got a home depot near me. Wanted to see if I could find some thing light weight?? Was also looking at the Fighting Butt threaded units? They look a little short?? I have also seem in home depot Nylon Bolts. Don't know if I could get a threaded tube with it? Got to spend some time and look around Might be better with a good hardware store.
Forum: rodboard

No biggy! A inside threaded tube, bolt to match, Washer on the bolt for grip, with a nut? to hold the ring in colors I will make, and proper size weights. Just have ta figure if I want the weights to show or recess them into the handle. What to use for the tube and bolt, weight wise? Thanks guys
Forum: rodboard

Thanks Mike. I found the Cabella's . They all seem to be the same I got two of the bass pro's and will be tearing one apart to see what the bolt looks like. Got an idea of matching the but end for my rods with a colored end ring and use the balance weights.
Forum: rodboard

Hi guys; I'm looking for different balance kits that screw onto the end of the handle . I have the ones from Bass Pro but thought I have seen another? Is there more? Want to see how they are made. Got an idea? Got to go lye down after that LOL Thanks
Forum: rodboard

Mary Lou Did you put any pics of that rod you just did on the pics page??
Forum: rodboard

Try batson, rainshadow/Forecast at Schnieders rod shop
Forum: rodboard

I'll trade ya for a bridge I got here! But ya got ta call now only $19.95 One time only don't miss this great offer blaa blaa blaa
Forum: rodboard

Kept my fingers crossed, but, then there is another about winning a lottery?
Forum: rodboard

Ever get the one where some relitive has died from a plane crash and left x-million in a bank?? That's a good one. Some where in Africa I think?
Forum: rodboard

It will penitrate better when thin IMHO But do not go to thin or you will have to put on many coats to get good coverage. Try it the way it is said on the bottle. You don't want to put just alcohole on??
Forum: rodboard

Got an Email a few days ago. A guy in Indonesa wanted to know if I would build him some rods. That was why I asked about saltwater rods. It looked funny to me. Seems he wanted me to build a number of rods for his Tackle Store? When I questioned his paying with a credit card, and maybe using Pay Pal or that I will not buy unless I have money in hand, Have not herd from him?? Just watch out fo
Forum: rodboard

If I have to make a slight arbor with tape, I use 1/4" tape and coat well all around them with the rod bond
Forum: rodboard

St Croix's site will give you a spacing of a similar blank or rod and many suppliers have them. BUT this is only a Starting Point. Check out the Libray Page for The Concept Guide Placement articals. These will tell you how to place your guides
Forum: rodboard

Hay guys your making me thursty??!! This bud's for me
Forum: rodboard