SPONSORS
2024 ICRBE EXPO |
Results 61 - 90 of 218
9 years ago
Chris Tulk
Hi Don,
Thanks for the email! I live in Ontario so it's perfect!
Forum: rodboard 9 years ago
Chris Tulk
Hi All,
Anyone know if you can buy blanks and components in Canada's?
Forum: rodboard 9 years ago
Chris Tulk
Hi Phil,
Are you able to post a picture? I find my back gets very tired when I am wrapping with my wrapper.
Forum: rodboard 9 years ago
Chris Tulk
Got it!
Do you know the link to the video Tom posted on you tube on how to finish a graphite grip with Permagloss? I can't find it.
Forum: rodboard 9 years ago
Chris Tulk
Thanks Tom.
Chris I am not sure I understood? Are you using a full can for the weight so that it doesn't tip?
Forum: rodboard 9 years ago
Chris Tulk
Thanks Tom.
Chris I am not sure I understood? Are you using a full can for the weight so that it doesn't tip?
Forum: rodboard 9 years ago
Chris Tulk
Hi Everyone,
Thanks for the tips. I will use the same epoxy for all my coats and the final coat with Permagloss.
Once I open the perma gloss can it be re-sealed and used again?
Forum: rodboard 9 years ago
Chris Tulk
Hi All,
I did my wet layup on a graphite grip last and I used an epoxy that is marketed for use to builds surf boards. I am ready for my top coats now. I usually use the 321 from Riley Rods but I don't have enough left at the moment. May I ask what type of epoxy you guys are using for your top coats?
Should I be concerned about using a different type of epoxy over the one I used for my wet
Forum: rodboard 9 years ago
Chris Tulk
Hi All
My current build has gone from bad to worse! I just pulled the tape off the rear grip and found that some epoxy had wicked under the tape! Any way to remove this? Can I sand the EVA? It's to thin to peel off!
This is a disaster!
On the flip side my wraps turned out really nice! Lol
Forum: rodboard 9 years ago
Chris Tulk
Hi Victor
I used a two part Epoxy from Riley Rods. I actually really like the stuff. I don't know why it smeared. I applied the epoxy literally 12 hours after! Well I will redo it coat with color preserver then apply epoxy.
Any tips for getting epoxy off EVA grips? Can I sand them?
Forum: rodboard 9 years ago
Chris Tulk
Hi Ellis
How long do you let the paint dry/cure before you apply epoxy?
Thanks for the youtube video.
Forum: rodboard 9 years ago
Chris Tulk
Hi All,
Second post from last one.
I forgot to ask what is the best medium to write with for gold on a graphite blank that I can apply epoxy to it with a few hours?
Forum: rodboard 9 years ago
Chris Tulk
Hi All,
I wrote on a rod today with Testors model paint, gold, and applied epoxy to it after 12 hours. Well disaster stuck! the epoxy smeared the paint. This was the final step in the completion of the rod that I was planning to give my Dad tomorrow for his retirement gift!
Is there a set amount of time I need to wait before applying the epoxy?I thought you can apply epoxy over Testors ena
Forum: rodboard 9 years ago
Chris Tulk
Hi Mike/Joe
If your cutting a hole the size of the butt diameter how does it make contact at the tip? The method sounds doable but o am not seeing the hole size properly I guess? In fact it wouldn't really contact the blank until the butt end?
Forum: rodboard 9 years ago
Chris Tulk
Hi Chris
I tried to find the right answer on this forum and others. Let me tell you that there is no straight answer. So many guys are using different techniques it can be very confusing and frustrating. A lot of people say permagloss is the way to go. But with that you will,find many techniques on how to apply it because it cures so quickly. I just bought a bottle. I want to try it but I have
Forum: rodboard 10 years ago
Chris Tulk
Hi David
I like the color combo also. Are you thinking the under wrap as black gold and red then black over wrap?
Forum: rodboard 10 years ago
Chris Tulk
Thanks Bill. I did read the library article. Also watched a couple videos on youtube.
Regarding color the theme of the rod is black and gold so I an kind of stuck with those colors.
Forum: rodboard 10 years ago
Chris Tulk
Thanks Guys for the input. I am going to go with black and gold under with 2 coats of epoxy and black over.
One other question do you burnish the under thread any special way?
Forum: rodboard 10 years ago
Chris Tulk
Hi Sergiy,
I actually want it to appear more black than gold. After the under wrap you used CP. May I ask why? I was under the impression this is where the first coat of epoxy was applied? Possibly even two coats for added depth?
Forum: rodboard 10 years ago
Chris Tulk
Hi All,
I am about to attempt my first tiger wrap. I want the effect of the wrap to look black and gold. Any suggestions on the under wrap color? What would e the proper color procedure?
Forum: rodboard 10 years ago
Chris Tulk
Hi Robert,
Where is he going to sell these? Do you have any pictures?
Forum: rodboard 10 years ago
Chris Tulk
Hi Tom,
I have a couple reels around the house but they don't seem to have the "upswing spool" like the newer reels do?
Hi Jim,
Thanks for the info. I requested a catalogue so I will wait until I get it. Then try the method you suggested. I don't really think my Dad is going to notice any performance hit.
Forum: rodboard 10 years ago
Chris Tulk
Hi All,
I am building a MHX SJ842-2 spinning rod for my Dad as a gift. I am using Fuji BKLAG-20H, 10H 5.5H then BKTAG-4.5J the rest of the way. This is my first spinning build. I have researched guide placement on this site as well as Anglers Resource. My question is how do you determine the choke point of the rod if you don't know exactly what reel will be used on the rod. I mean all I know a
Forum: rodboard 10 years ago
Chris Tulk
Hi Jimmy
I have always wondered what the durability of the poly is. Have you used it on a rod that you have used in a boat? I ask because I think fly rods don't see the same type of abuse that let's say a bass casting rod might.
I know the Spraymax that Tom refers works but it is expensive if you are only shooting one rod. If you can plan to do multiple rods it becomes more cost effective.
Forum: rodboard 10 years ago
Chris Tulk
Well I refused the order. Not sure what's going to happen now! FedEx has it and my visa has already been charged. I will have to call them. Maybe my first blank prefer was just under 100 because I didn't have to pay anything. Intact they left it at my front door.
Chris you say use Andy? He must pay the duties and therefore pass that on in the component cost. Anyway I will look into it.
No
Forum: rodboard |