SPONSORS
2024 ICRBE EXPO |
Results 1 - 30 of 573
9 years ago
Jeremy Wagner
2. Broken rod 1
I stressed tested and inspected this blank before building on it, as I do with every blank. The customer had the rod for about 2 months before sending me this picture of a deep scratch on the blank between the 1st and 2nd guide. It was not there when I shipped the rod out. He said he hasn't used the rod.
Forum: rodboard 13 years ago
Jeremy Wagner
I need some help with my lathe. I just got it from my wife's grandfather and I can't seem to figure out the tailstock. I can't get the old center out- it seems to be part of the shaft. I'd like to be able to put in a drill chuck and such. Any ideas? This number 2 is on the opposite side of the tailstock from the serial number.
Forum: rodboard 13 years ago
Jeremy Wagner
I need some help with my lathe. I just got it from my wife's grandfather and I can't seem to figure out the tailstock. I can't get the old center out- it seems to be part of the shaft. I'd like to be able to put in a drill chuck and such. Any ideas? This is the serial number on the tailstock.
Forum: rodboard 13 years ago
Jeremy Wagner
I need some help with my lathe. I just got it from my wife's grandfather and I can't seem to figure out the tailstock. I can't get the old center out- it seems to be part of the shaft. I'd like to be able to put in a drill chuck and such. Any ideas?
Forum: rodboard 13 years ago
Jeremy Wagner
I need some help with my lathe. I just got it from my wife's grandfather and I can't seem to figure out the tailstock. I can't get the old center out- it seems to be part of the shaft. I'd like to be able to put in a drill chuck and such. Any ideas?
Forum: rodboard 13 years ago
Jeremy Wagner
8. LGM102XH
I used the simple spiral and so far I'm pleased with it. I've not used a spiral wrap on any of my personal rods so this is a first for me.
Forum: rodboard 13 years ago
Jeremy Wagner
9. LGM102XH
I used SG 6's for the runners. I love the single foots!
Forum: rodboard 13 years ago
Jeremy Wagner
10. LGM102XH
The butt guide is a MNSG 20. I know it's big, but I needed the height so I don't cut my thumb off when holding the foregrip. I chose the SIC because I'm using 50lb braid.
Forum: rodboard 13 years ago
Jeremy Wagner
11. LGM102XH
The hook keeper and my decal. I used single thread inlays of gold metallic here and on all of the guides. I'm usually a fan of silver but since the Lami decal is gold, I used the inlays to pull it all together.
Forum: rodboard 13 years ago
Jeremy Wagner
13. LGM102XH
The grips are turned from Billy V's variegated EVA- awesome stuff. The split grip is done in a tiger wrap with a black and white base and a white top layer. Two coats of D2 in between layers.
Forum: rodboard 14 years ago
Jeremy Wagner
This is an 8" musky lure that I wrapped in snake skin.
Forum: rodboard 14 years ago
Jeremy Wagner
I appreciate Tom allowing us to post the occasional fish picture- I was excited to FINALLY be out fishing today and I had to post this picture. A buddy and I were out on the river and this was the first fish of the day. I caught his twin a few minutes later. Both fish were caught on my 3C68MXF built as a spinning rod (you can kinda see it in the picture). They hit a shad rap I custom painted
Forum: rodboard 14 years ago
Jeremy Wagner
Rear grip is about 16.75" and the forgrip measures 5.5".
Forum: rodboard 14 years ago
Jeremy Wagner
Finally got all of my grips turned. Equipement used: Drill press, wood chisel, sandpaper. Man do I need a lathe!
The grips are fitted but not yet epoxied in place. The rear grip is about 16 3/4" and the foregrip is about 5 1/2".
Forum: rodboard 14 years ago
Jeremy Wagner
Some of Billy V's variegated EVA on my split grip musky rod. The butt is 4.75" long and about 1.4 inches in diameter.
Forum: rodboard 14 years ago
Jeremy Wagner
24. Skipper
BLNAG 8 I marbled on the guides...I know it adds additional weight, but it really ties the whole rod together.
Forum: rodboard 14 years ago
Jeremy Wagner
25. Skipper
Marbling in split grips. Black base, orange and yellow flames.
Forum: rodboard 14 years ago
Jeremy Wagner
26. Skipper
5'10" medium power, xtra-fast action. Split grips, marbling, BLNAG 8, BLAG 6, 4's to the top.
Forum: rodboard 14 years ago
Jeremy Wagner
27. Trout Rod
BYAG 25 Light brown wrap, metallic trim and inlay.
Forum: rodboard 14 years ago
Jeremy Wagner
28. Trout Rod
The hook keeper and foregrip. Elegant and simple (my motto).
Forum: rodboard 14 years ago
Jeremy Wagner
29. Trout Rod
This is a 4'6" rod I built using a fly rod top. It's a gloss brown blank and I used light brown wraps with metallic silver trim. No split grip on this little guy.
Forum: rodboard 14 years ago
Jeremy Wagner
30. Swimbait Rod
The cobra skin inlay between the split grips.
Forum: rodboard |