SPONSORS
2024 ICRBE EXPO |
Current Page: 1 of 1
Results 1 - 27 of 27
7 years ago
Nathan Moore
i was just going to say that I believe Ron Weber at Southwest Custom Rods carries them now as well.
Forum: rodboard 8 years ago
Nathan Moore
Given all that information I would not go with an 8 weight. i do not know HOW something that stiff can protect light tippets at all for trout fishing. I think your best bet is going to be a 6 weight. I have two and fish them frequently for trout that typically run to four or five pounds and for smallmouth that run about the same. I have also caught pike to 24 inches (chasing bigger this year)
Forum: rodboard 8 years ago
Nathan Moore
Medical syringes are typically always lubricated with silicone. Stick with those that are provided by rod building companies and be assured that they will always be reasonably contaminent free
Forum: rodboard 8 years ago
Nathan Moore
I will second, third or even fourth Joe M. at customflygrips.com. I have ordered more than a few from him and the quality is always top notch.
Forum: rodboard 8 years ago
Nathan Moore
I would have to cast my eyes askance when a rep makes a claim like that...by the way, red cars get better mileage than black cars due to reduced drag.
Forum: rodboard 8 years ago
Nathan Moore
6 weight, in my opinion, will be more than adequate. Batson has some great blanks in the RX6 two piece line. I like the feel of a full wells grip on that particular weight rod. American tackle Matrix Blanks are also nice for beginners. I have built many on the Batson though and have been very satisfied.
Forum: rodboard 8 years ago
Nathan Moore
Ron has the best seats I have ever purchased. I am only small time compared to many building maybe 40-50 a year but I have never been disappointed.
Forum: rodboard 8 years ago
Nathan Moore
There is a good article in the library about static placement of guides and how to go about it. I use it often in conjunction with the guide placement charts available online through places like Mudhole.
Forum: rodboard 8 years ago
Nathan Moore
I have a metallic red RodGeeks blank and a metallic lavender blank....peruse their custom paint colors. VERY nice and well worth the extra green if you ask me.
Nathan
Forum: rodboard 9 years ago
Nathan Moore
There has been some experimentation of heating a chainsaw file or similar and placing it in the blank thus heating the glue and softening it from the inside and allowing the grip to slide off but I do not know how effective it has been in practice.
Forum: rodboard 9 years ago
Nathan Moore
I ordered last week and got my order on Monday...smooth transaction. Have another order ready to place as soon as the customer gets me the check
Forum: rodboard 9 years ago
Nathan Moore
I think if you DO scuff you run the danger of scratching your blank....don't ask me how I know.
Forum: rodboard 9 years ago
Nathan Moore
I think that might be it....check and see if your tissue may be the kind that has LOTION in it
Whups...never mind. I didnt read who I was responding to very carefully. so much for my brain fart.
Forum: rodboard 10 years ago
Nathan Moore
All I managed to do was scratch my blank with a nib pen and the ink didnt seem to flow even on paper....sorry to hijack but ANY help would be appreciated here/
Forum: rodboard 10 years ago
Nathan Moore
Matrix Greenies have a two piece 8 foot four weight.....I have one that is sitting here. If you cannot find one to buy let me know and I would be happy to sell it to you.
Forum: rodboard 10 years ago
Nathan Moore
17. Re: home made cp
I have read (but cannot substantiate) that Minwax water based poly-acryic will do the job.
Forum: rodboard 10 years ago
Nathan Moore
I have heard the "reach" thing before which almost makes sense...but i want to know WHO reaches all the way to the stripper in the first place. I usually, when stripping, strip from behind my rod hand in the first place. Can someone help me out here? I think I am missing something.
Forum: rodboard 10 years ago
Nathan Moore
MHX...the color you want and are SUPER blanks for the price
Forum: rodboard 10 years ago
Nathan Moore
Simple physics when you move the fulcrum (reel seat) forward you gain weight in the rear but need a longer rear grip
When you use a shorter rear grip you have to move the seat rearward...thus necessitating added weight to the butt to get it to balance.....The weight of the reel, in my mind, is not going to make that much of a difference in balance point since it IS the fulcrum. Am I thinking tha
Forum: rodboard 11 years ago
Nathan Moore
I just built one for a Steelers fan (7' spinning light action) and I have to tell you that the yellow with black just POPS on that white blank....you have to go to my facebook page to see it though.
Forum: rodboard 11 years ago
Nathan Moore
22. Re: Seviers
WHOA...I guess......................... is profane...maybe I should have said that STINKS ...didnt want someone thinking I was using extreme profanity or anything. I did edit it to keep from offending those who would be.
I would still like to figure out how to become the distributor for those blanks however. I have plenty of space to store them and do not see any reason I could not get them
Forum: rodboard 11 years ago
Nathan Moore
23. Re: Seviers
That STINKS (just found the edit button) . I inquired once about what it would take to acquire the Sevier Tiger Eye Blanks Line but got no reply. I guess it is just better to slip into obscurity...would have loved to be the distributer for them as I have heard so much about them and they seem to be very sought after.
Forum: rodboard 11 years ago
Nathan Moore
Batson
MHX
TFO
American Tackle
If you are not charging him labor all of those should fit the bill nicely
Forum: rodboard 11 years ago
Nathan Moore
25. Re: scales wrap?
I think he is speaking of threadwork...have you tried the Rodbuilders Library? Google it and look under the threadwork page....:
I hope I didnt just get into trouble by posting that link.
Forum: rodboard 11 years ago
Nathan Moore
I have used metallics on several rods now as the main guide wrap. Works great and looks good I think. I have a friend who has been building rods for years who does very little with regular nylon anymore. You will be fine.
Forum: rodboard 11 years ago
Nathan Moore
27. Re: heat gun
Been using the Harbor Freight on myself for years bending curves while building bows....no problems and the best 10 bucks I have ever spent
Forum: rodboard
Current Page: 1 of 1
|