SPONSORS
2024 ICRBE EXPO |
Tite Bond 111
Posted by:
Pat Connor
(---.hsd1.tx.comcast.net)
Date: November 22, 2012 07:59PM
Where can this be purchased ? Re: Tite Bond 111
Posted by:
Don O'Neil
(---.dhcp.asfd.ct.charter.com)
Date: November 22, 2012 09:34PM
Most hardware stores will have it. Re: Tite Bond 111
Posted by:
Pat Connor
(---.hsd1.tx.comcast.net)
Date: November 22, 2012 09:37PM
Thanks need all help I can get . Re: Tite Bond 111
Posted by:
Donald Becker
(---.hawaii.res.rr.com)
Date: November 23, 2012 11:58AM
Just some general info regarding glues and epoxy that I have come across.
The labels on many products are sometimes misleading. Glues and epoxies are no exception. Some of the levels of the effects of water are: moisture resistant, water resistant, waterproof. Titebond III is a wood glue that is moisture resistant. See the specifications listed on the following link. [www.homedepot.com] Previously I was checking on epoxies and found the following: Gorilla Epoxy, 5-MINUTE SET [www.gorillatough.com] SUPERIOR WATER RESISTANT – withstands moderate exposure to water Loctite® Epoxy Instant Mix™ 5 Minute [www.loctiteproducts.com] Not Recommended For Continuously wet areas or water immersion Devcon 5-Minute Epoxy 9 oz [www.hobbylinc.com] Features •Forms a clear hard rigid bond self leveling liquid in minutes. •5 minute working time. •15 minute setting time. •1 hour functional cure time. •Water resistant. I have not had any problems with Flex Coat epoxy glue. However, when my current supply is exhausted, I will give Systems 3 T-88 a try. Both Systems 3 and West Systems have marine grade epoxy. Don Becker Re: Tite Bond 111
Posted by:
Pat Connor
(---.hsd1.tx.comcast.net)
Date: November 23, 2012 12:14PM
Thanks Don I really appreciate the info and will take it all into consideration . Re: Tite Bond 111
Posted by:
Russell Brunt
(165.214.14.---)
Date: November 26, 2012 02:47PM
Don, if you want a good all purpose paste type for a lower price try Fasco 110. Over the years it has gone by a variety of names. It is a proven product. Russ in Hollywood, FL. Re: Tite Bond 111
Posted by:
Donald Becker
(---.hawaii.res.rr.com)
Date: November 26, 2012 03:35PM
Hi Russ,
Thank you for the info. I will check it out. Don Don Becker Re: Tite Bond 111
Posted by:
Russell Brunt
(165.214.14.---)
Date: November 27, 2012 12:15PM
It used to be called Resco....then Kardol....if those names mean anything to you. We used Resco a lot for teak/general marine/boat stuff back in the day. I have never used their rod thread coatings though. Russ in Hollywood, FL. Re: Tite Bond 111
Posted by:
bill boettcher
(---.dyn.optonline.net)
Date: November 27, 2012 04:17PM
I have never looked but What about Rod Bond ??
I used it once on a coffee pot that had a crack in it used it for several years and it never leaked ????!!!! Bill - willierods.com Edited 1 time(s). Last edit at 11/27/2012 04:20PM by bill boettcher. Re: Tite Bond 111
Posted by:
Hunter Armstrong
(---.rcmdva.east.verizon.net)
Date: November 27, 2012 04:20PM
Don, Thanks for posting the information. I have been pondering it for the last few days, and now have a question: how "water resistant" does our epoxy have to be? I typically build rods for fresh water fishing (mostly bass). Admittedly, sometimes a rod gets dunked and water does splash about in my canoe from time to time. Nonetheless, it seems all the epoxies you listed should be able to withstand that level of water contact. I think this is especially true when you consider that much of the epoxy that binds a handle/grip/real seat to a blank never comes in contact with water even when the rod is immersed. Or, am I missing something? Thanks.
Slainte, Hunter From ghoulies and ghosties, and long leggedy beasties, and things that go bump in the night, Good Lord deliver us! Re: Tite Bond 111
Posted by:
Donald Becker
(---.hawaii.res.rr.com)
Date: November 28, 2012 03:04AM
Hi Hunter.
I’ll try to answer your questions in a general manner. When we build a product, all the bits must work together without fail. Let’s consider a major importer who imports rods and tries to provide a viable product at a reasonable price. Specifications will be provided and some general trade practices will be expected to be followed. The manufacturer, in an attempt to minimize costs may use methods not normally considered. A local shop has reported that several rods came in with loose reel seats. The problem was traced down to the use of cardboard as a substrate between the blank and the reel seat. Had the manufacturer used either a better filler or a water proof/marine grade epoxy, the problems may have been avoided. In another thread, Tom addresses using thread to fill the space and provide centering between the blank and the reel seat. The thread is then saturated with liquid epoxy and holds the epoxy to provide appropriate bonding of the blank and reel seat. Some people use yarn instead of thread. Although this may be an old school approach, it is effective and reliable. I stay away from fast setting epoxy as well as masking tape when building rods. As mentioned, Flex Coat has been reliable for me. Another product to consider is System 3, T-88 epoxy glue. It is a marine grade construction epoxy. OBTW, 95% of my fishing is in the surf. After every outing, my rods and reels are thoroughly washed. About once a year I try to wax the rods that I expect to use. My fishing environment may be a little tougher on equipment than a fresh water environment. Hope this helps, Don Don Becker Sorry, only registered users may post in this forum.
|