SPONSORS
2025 ICRBE |
Crankbait Rodblank comparison
Posted by:
Jan Kleinau
(---.pools.arcor-ip.net)
Date: May 10, 2012 10:57AM
Hello,
can someone compare the Action from the Batson CB66MH with the St.Croix 3C66MHM? Is the "Mod-Fast" from the Batsonblank more moderate or more fast? I am planning to use Braid for my new Crankbaitrod and can't decide between these 2 blanks ... Regards, Jan Re: Crankbait Rodblank comparison
Posted by:
Mike Lawson
(---.qni.biz)
Date: May 10, 2012 11:40AM
If using braid you might want to consider a glass blank. The Lamiglass SR705 rod is an awsome deep cranking and trap blank. Re: Crankbait Rodblank comparison
Posted by:
Jan Kleinau
(---.pools.arcor-ip.net)
Date: May 10, 2012 11:54AM
Hello,
thank you for the answer. My little problem is, that I like to order in Europe and the 2 blanks I can get here. So I have to decide between these. Thanks, Jan Re: Crankbait Rodblank comparison
Posted by:
Karry Batson
(---.wavecable.com)
Date: May 10, 2012 05:38PM
CB66MH
Crank Bait Rods Component Part Number Part Description Rod Blank Model # CB66MH-M 6' 6" 1pc Med/Heavy Crank Bait - Matte Clear Butt cap: EVABC20 EVA Butt Cap 19.8 mm Reel Seat: GTBTG16C-10.0 Size 16 Graphite Casting Blank Exposed Trigger Reel Seat, Textured Gray Reel Seat Hood: GTT16C-SN-TC Hood w/cushion Single Nut for GTBTG16 - True Light Tich Fore Grip: WFG2.5 Woven Foregrip 2.232" Length Use with WFGRC, WFGFC, and WFGPB - EVA End Caps and Shim Rear Grip: WHGRY-10 cut to 7" 10" Woven Graphite Handle-Gray (1.05" OD / .970" ID) Use with WHKAx2, WBBC, and WBTC - EVA End Caps and Shims Winding Check: AWC360 Aluminum Winding Check .360" I.D. Hookeeper: TCHKS Small TiCH Hook Keeper Tip Top XTCPPZT06R05.5 SS316-RRD-P Top 06 'Z' Ring 5.5 Tube - TICH w/o Chrome Guides (see below for size and quantity) XPTCFZG SS316- TICH w/o Chrome Single Foot Fly Guide Ground w/ Z Ring RRD Guides (see below for size and quantity) XTCLXNZG SS316-LXN Guide w/'Z' ring -TiCH w/o chrome-ALPS Guide order from the tip top Guide Guide Placement - In inches from the tip top 1st XPTCFZG06 3.25" 2nd XPTCFZG06 7.75" 3rd XPTCFZG06 12" 4th XPTCFZG07 16.5" 5th XPTCFZG07 22" 6th XTCLXNZG08 28" 7th XTCLXNZG10 35.5" 8th XTCLXNZG12 44" Karry Batson Batson Enterprises Inc. Ph: (877) 875-2381 Fax: (360) 683-3579 karry@batsonenterprises.com www.batsonenterprises.com Re: Crankbait Rodblank comparison
Posted by:
Bill Batson
(---.wavecable.com)
Date: May 10, 2012 05:39PM
I cannot compare the actions between the two blanks.
The Batson Rainshadow is more moderate than fast and is very braid friendly. The CB (Crankbait) series is very popular in the rainshadow line. St Croix makes great blanks. I am sure you would be happy with either one. Re: Crankbait Rodblank comparison
Posted by:
Joel Smith
(---.pools.spcsdns.net)
Date: May 10, 2012 09:27PM
The Batson CB is a great blank. I have 5 myself and build on this blank all of the time for others. Not sure about the St Croix but you won't go wrong with the Batson! Re: Crankbait Rodblank comparison
Posted by:
Michael Danek
(---.proxy.aol.com)
Date: May 12, 2012 10:08PM
Keep agonizing over these two and forget glass. There may be a glass blank, but I've never found it, that can compare with graphite for weight, and graphite can match any action of glass. IMHO Re: Crankbait Rodblank comparison
Posted by:
Jan Kleinau
(---.pools.arcor-ip.net)
Date: May 22, 2012 07:16AM
Hello!
Since today I can also order the MHX blanks in my country. So the MHX CB845-Blend is also a possibility to order for me. Can someone say something about this blank? Thanks! Jan Re: Crankbait Rodblank comparison
Posted by:
Jan Kleinau
(---.pools.arcor-ip.net)
Date: May 28, 2012 04:20AM
No one?
;o) Sorry, only registered users may post in this forum.
|