Thanks guys, especially Norman, that is exactly what I wanted to hear.... If you add permagloss do you just coat, or do you prep the grips prior. Wasnt sure if you sanded these lightly or they even needed it.
Forum: rodboard

Hey guys quick question, building on a IMMC73ML blank, but I do not have the blank on hand right now. Anyone have any idea on the reel seat size on an exposed casting seat. Seat will be around 11" from butt. Dont mind ordering a couple, but was wondering if anyone had it off hand.
Forum: rodboard

Ok so I have a few grips I plan to use on upcoming builds, the CFX and the Carbon Fiber Batson grips..... So I have NEVER used these on a rod before, I am accustomed to cork or EVA, or even a WINN grip. So opting to try out the Carbon Fiber grips would be stepping out for me. That being said, aside from ascetics, do these serve much of a purpose. I rarely have my hands on the grips unless I a
Forum: rodboard

Hey guys looking for your opinions to see if I am heading down the correct path. Rod will be used primarily with 10# to throw 110's and Rapala Shadow Raps or Jackal Rerange jerks... The more I look the more I continue to come back to drop shot blanks. Seem to like that ML or M power in those blanks with a faster recovery. Heres what i came up with, let me know about these options for this applica
Forum: rodboard

Shaved and recoated turned out great, question was more how to move forward after it happens rather than how to prevent. Luckily this is the first time this has happened for me, but I have learned a lot in the thread and have some new ways to be proactive and prevent.
Forum: rodboard

Keep u posted how it turns out
Forum: rodboard

Thanks guys, actually do and did most of the suggestions, first time I have had this happen haha. Question was more towards what next, I know how to prevent it moving forward, but now that it happened I just went ahead and used a razor to slice the area that had lifted and re-coated. Should be good to go now. Thanks for the info though, will try to incorporate those.
Forum: rodboard

I will send u a pic later on, have a ds700 recently built in the boat. The color resembles and pairs great with the Black Grey Alconite finish
Forum: rodboard

So yesterday, when i got few free minutes from my 7 month old twins and 4 yr old whom thinks hes Ironman, I went down to apply my decal over the area I finished. After I applied it I put my FlexCoat high build over the decal area. Everything looked good, set it in the dryer and came back and the one edge of the decal had lifted. Unfortunately the epoxy was dry by the time I noticed. So now I have
Forum: rodboard

Perfect, was planning to use Fuji NCP Size A on the wrap, didn't think there would be an issue, figured I would ask. Thanks Steven.
Forum: rodboard

I have an unfinished blank from NFC, one of the Delta models I am about to start working on. This blank has ridges running the length of the rod as well, like Tom said its the resin from when the blank was formed. I actually kinda like the look of the rod, it's different from the smooth graphite on the rest of my rods. Not to hijack, but it maybe helpful for the original poster as well, not in
Forum: rodboard

What are you using the rod to throw? Anything specific or just general purpose. Have you looked at the NFC MB 705-1 (IM), may wanna check that out as well. Plus it's $75. My buddy loves the one I built for him. This being said i do really like the Library blanks i have so far, light and the smoke color goes great with black grey alconites. Cant go wrong either way.
Forum: rodboard

Yup, expecting my Delta Hybrids in the next few weeks, NFC was attentive and quick to answer any and all questions, including taking some measurements on the blank for me. Great group.
Forum: rodboard

Ok so I got the info from Lance on the RF Legacy, too bad. How about the Seeker guys, I have never used a blank from them, how is the quality these days. Seeker BS706S (SGlass) specifically
Forum: rodboard

Anyone know if the Rich Forhan blanks are still available to be purchased, think Swampland had them awhile back. If not does Seeker make an equivalent? Would the Seeker BS706S (SGlass) be the consolation prize. Anyone use those XComps from Rodgeeks? RF Legacy Elite blanks
Forum: rodboard

Take a look at the NFC Delta Hybrid CB blanks, I know that Mark Daniels Jr loves (loved since he is now with Favorite) the Graphite/Glass combination. I am actually going to be using the Delta 705CB Hybrid (Medium Heavy) cut down to 6'10. Gonna serve dual purpose between spinnerbait and lipless. The Hybrid blank will give you the glass tip with the backbone and power of the graphite down in the
Forum: rodboard

Stay safe
Forum: rodboard

Seem to be seeing these posts all too often
Forum: rodboard

Pretty sure its NFC, least that's what I was told from the Angler at the show.
Forum: rodboard

Talked to an Alpha Anglers sponsored fisherman at an outdoor show in NY, he was working a Skeeter dealer booth. He mentioned to me that Gary Loomis built the blanks that were used for Alpha Anglers. So yes I assume what you saw was a North Fork Composites blank, very well could have been what you said. He also told me to send him any rods so he can get ideas hahahaha. Havent seen one of their
Forum: rodboard

Wonder which models the Kistler Feel N Reels are using.
Forum: rodboard

Quick question guys, I am considering the NFC Delta MB 705 (Delta LMX) - building for the primary purpose of throwing spinnerbaits (3/8ounce) and the occasional jerkbait for river smallmouth. My question is not having seen or used the Delta blanks, what kind of feedback would you give on this model for this type of presentation. Hard to pass up for $50, and figured it was worth a look. I was a
Forum: rodboard

Good question Tom, was considering this blank but prolly more as a 6'9 or 6'10, wasn't sure the effect of trimming would have here.
Forum: rodboard

I also like the less is more, i do not like to add weight unless I need to. Really have fallen in love with Baston Rapid Speed Spin MVT Toray reel seat.
Forum: rodboard

Had sent a few emails to Bingham but have never heard back, does anyone know if the Generation 4 Highbuild is available, and is there any info on or reviews of the product. Was interested in giving it a shot.
Forum: rodboard

Yup Carol is the best! Wish everyone health, from my location in NY to yours.
Forum: rodboard

Yeah just thought it was odd they opened a customer service ticket and then just closed it. Oh well they can keep the couple dollars, ordered elsewhere to fill my order.
Forum: rodboard

Yeah I gave up just didnt know if it was an isolated issue.
Forum: rodboard

Has anyone else had issues with GetBit, specifically with missing pieces of an order or simply not getting any replies from emails. Not meant to diminish the business, but I wanted to know if anyone else has had the same recent experiences. Not getting a reply after more than a few attempts is a bit troubling.
Forum: rodboard

I stopped using Winns just for this reason. Gonna have to tackle the same situation soon over here too. I was thinking to slice it off, remove and clean and replace butt as well. Most my rods dont have foregrips so i am lucky there.
Forum: rodboard