I agree, the ML is the one to go with. Todd
Forum: rodboard

I'm sure we will, and Jenny and Kendra contacted Frani's so they will have a good supply of fresh Halibut for Friday & Saturday.
Forum: rodboard

I have been hearing from bunches of folks attending, it should be good fun for all that attend. And Doc has promised to keep his pants up for the whole event. Billy, sorry to hear you won't be able to attend. I'm sure Karry and Adam will hold the fort down. We won't let them keep too late hours. Todd
Forum: rodboard

No problems should you decide to change it. just give us a call. Todd
Forum: rodboard

Ben, the American Tackle seat with the black graphite insert is model # AW12-T-BG. And we do have that in stock. Todd
Forum: rodboard

Mike, We have been testing a series of these blanks for quite some time and have recently placed them on order. They are currently scheduled to be available in about 30 days. Here are the models we have decided to carry. Model Length Sections Line Lure-Gm Lure-Oz. Lure Range CBVJ5810 5'8" 1 50-100 500 gm. 18 8-18 oz
Forum: rodboard

Oh, and on the same note.............we do stock that model and have it available for immediate shipping. Regards, Todd
Forum: rodboard

John, I would recommend the Lamiglas blank model GLB902ML, it's 7'6", 2pc. rated 6-25 lb. wth a 1/2 - 2oz lure rating. This is the blank that Lamiglas builds it Russian River rod on. Todd
Forum: rodboard

Robert, in that series the blanks are all the same, just the finish color is different. David, we have plans in the near future to add to the surf line. It has been very popular and we have had nothing but positive input from them. Regards, Todd
Forum: rodboard

Steve, I haven't done a push pole but I did a set of drift boat oars that were about 10' long each. The problem with his was that the original finish had worn off and the graphite portion was exposed and would leave splinters in your hands when you handled them. I just used flex coat and it turned out fine. Probably had a thicker finish than the original one but you could handle them again. T
Forum: rodboard

That is the case. For the first two year when they were offered only as blanks they were coated a translucent blue. Last year when lamiglas started a rod series from them they changed the color from the blue to a metallic forest green. Todd
Forum: rodboard

Jeff, it is taking place this year on the 11th & 12th of April. The Byob will be on the 10th & 11th. Jennifer Daley and Kendra Toedtemeier are taking care of all of the questions and scheduling the event this year. You can contact them at Jennifer@lamiglas.com Ken
Forum: rodboard

The SB166 is a fiberglass blank and no it is not parabolic like the SB series of glass blanks. Todd
Forum: rodboard

Don, it does have a stiffer tip than the 150 with a slimmer profile. Also a very powerful butt. Todd
Forum: rodboard

After many inquiries about this blank at the High Point show we made a special purchase of them. This is the 13' 0" blank designed for Red Drum Tackle, the only difference is that instead of a Texalium handle section we have had it made with a woven carbon handle which will add less weight and give greater hoop strength. This blank has been referred to as the "1502MH on Steroids'. It
Forum: rodboard

I think that would be a very good idea. Everyone needs a fresh drink of water after setting up. Todd
Forum: rodboard

By the way Trevor, we have that blank in stock ready to ship. Todd
Forum: rodboard

I also would recommend using a razor blade. Hold it straight up at a 90 from the blank and carefully scrape the finish off one thin line at a time. then very lightly sand the ridges off. Todd
Forum: rodboard

I would recommend the LMB864 for that application. Todd
Forum: rodboard

There have been no changes in the standard fiberglass fly blanks. Actually there have been no changes to this series in 10 years, just some additions. Todd
Forum: rodboard

Doc, was great seeing you there. Hope to see you in Longbeach later in the week. Todd
Forum: rodboard

Roger, The Lamiglas GFC84H was designed for catching keeper sturgeon on the Columbia river. 7' 1pc. 20-50 lb. size 7 top just perfect for detecting that very subtle bite with the back end to handle the oversize fish if needed. Todd
Forum: rodboard

Ronnie, if you will check out the Mud Hole Lamiglas discontinued section you will find 2 blanks that will fill your needs. The CG1022M 8'6" 2pc 8-12 lb. 3/8 - 3/4 oz lure and if sensitivity is primary the ESH1022M 8'6" 2pc. 6-12 lb. 3/8 - 3/4 oz lure Regards, Todd
Forum: rodboard

Eddie, Lamiglas designed a series specifically for fishing Tog last year. TF8430 7' 1/2-2 1/2 oz lure TF8440 7' 2-4 oz. lure GTF841M 7' 4-8 oz. lure GTF901Mh 7'6" 6-16 oz lure
Forum: rodboard

Lamiglas has a new GSB180 2MH, not even cataloged. Will be one in the Lamiglas booth at High Point. 15' 2pc. 60 lb. 10-16 oz lure.
Forum: rodboard

Bob, I have my shorts on right now in Miami and I'll certainly pack them for High Point. Todd
Forum: rodboard

Jim, It is the old school of thought on the surf rods only having 3 or 4 guides. I'd definitely go with a minimum of 7 guides on a 10'. Also Lamiglas does have a 10' 4pc. model surf blank "GSB1204M". Todd
Forum: rodboard

If we have any left from the initial shipment we will have them at High Point. Todd
Forum: rodboard

Thanks guys, I appreciate the support. I'm really looking forward to serving all of you with all of your rod building needs in the future. Being a part of the Mud Hole Team is very exciting for me, working with the #1 distributor/dealer of rod building components in the industry and selling all of the top brands. I'll be with the Mud Hole Team in High Point and then a couple of weeks later
Forum: rodboard

Lamiglas will sell the 1pc. untrimmed blanks on a special order basis along with the ferrule stock. Let me know here at Mud Hole if you are interested in any of these type of products. Todd
Forum: rodboard