SPONSORS
2024 ICRBE EXPO |
Results 241 - 270 of 273
12 years ago
Bill Marchisella
241. Re: Towards or Away?
I had this problem and I fixed it this way. I will post a photo showing my solution.
Forum: rodboard 12 years ago
Bill Marchisella
To get a straight cut if you want to put different color rings in round eva, I recommend the eva cutting tool that was featured in Rodmaker Magazine, volume 13, issue 4. To glue the eva together, use DAP Contact Cement.
Forum: rodboard 12 years ago
Bill Marchisella
243. rod blank info
I picked up a few blanks and I need some info on them. The first is a St.Croix F-70XH-BK, the next is a Shakespeare Wonderod 12-0290B, and the next is a SWB7M. Any help would be appreciated.
Forum: rodboard 13 years ago
Bill Marchisella
Rich
If it the same as the other 4oz spools, this is what I did I took an empty 100yd spool from Gudebrod and cut it in half and then I sanded down the drum to fit inside the 4oz spool and worked just fine
Bill
Forum: rodboard 13 years ago
Bill Marchisella
Rob-
I have about 4 different jigs. The idea is to cut the eva all the same size to fit the jigs. If you are using round eva, the outside diameter is not consistently the same, and can give you a problem, too. I have had no problems making checkerboard grips with any of my jigs. I have an eva cutting tool in Rodmaker that you can make if you want.
-Bill
Forum: rodboard 13 years ago
Bill Marchisella
Dave,
I am not going in a cab. I am renting a car and will have room for three people. Sorry for the misinterpretation.
Bill
Forum: rodboard 13 years ago
Bill Marchisella
I'm arriving at the Greensboro airport on US Air flight #3941 at 2:15 pm on Friday. If anybody needs a ride to the Best Western and is arriving around the same time, let me know.
Forum: rodboard 13 years ago
Bill Marchisella
250. Re: Cutting EVA Grip
Larry,
There is a eva cutting tool described in Rodmaker Magazine #13-4 called the Marchisella eva cutting tool that I developed that you can easily make. It is safe, accurate and easy to use. This tool is set up to be used on a Renzetti lathe, but can be adapted to any lathe. If you have any questions, please contact me.
Forum: rodboard 13 years ago
Bill Marchisella
251. Re: sanding EVA
In response to Ferdi that he would like to see some photos of the tool, I will post them in the 'photos' section.
If there are any questions, I'll be glad to answer them. Email me at billsreelworld@aol.com.
Forum: rodboard 13 years ago
Bill Marchisella
252. Re: sanding EVA
I would say that if you want a more accurate cut and reduce the danger of using thread to cut eva, try to make the tool that was featured in the last issue of Rodmaker. It also cuts cork and trims blanks.
Forum: rodboard 13 years ago
Bill Marchisella
Ken,
Are you just trying to cut cork accurately and consistently? If so, I have developed a tool to cut EVA which can be adapted to cut cork. It is featured in Rodmaker, the upcoming issue.
Bill
Forum: rodboard 13 years ago
Bill Marchisella
254. Re: Hagens Wrapper
It is not new Cabelas has them I have one for many years
Forum: rodboard 14 years ago
Bill Marchisella
255. Rod Sock
Does anybody know where I could get a 7 foot Rod Sock for rod I'm making ?Maybe It could Embroidered with the persons name
Forum: rodboard 14 years ago
Bill Marchisella
Kevin,
Doc has a black widow weave. I have done it and it came out great. I'll post a picture if you're interested.
Forum: rodboard 14 years ago
Bill Marchisella
Ihave bpth and I think both are great. They both do basically the same thing, each in a little different way. The results are basically the same.
Forum: rodboard 14 years ago
Bill Marchisella
258. RodMaker Magazine
Tom,
Should I be concerned that I haven't received my RodMaker yet, or should I wait a few more weeks before I report it missing in action?
Sorry to bother you but I think I'm losing it. lol
Bill Marchisella
Forum: rodboard 14 years ago
Bill Marchisella
259. Re: Spiral EVA grips
Herman,
To do this spiral you will need a jig. The grip in the picture is 272 pieces cut and glued together. By the way, I now hate contact cement. lol
Bill Marchisella
Forum: rodboard 15 years ago
Bill Marchisella
260. Fly rods
While at the reception at the 2009 show, I won a $200 gift certificate from Batson. I am a salt water builder, so I decided to do something different and build a 4 piece 8 weight fly rod. I spined all 4 pieces of the rod to get a starting point. Now I have two questions: When doing ferols, do you put alignment lines on both the male and female parts to keep the guides straight? Also, what
Forum: rodboard 15 years ago
Bill Marchisella
261. Re: Later than never
Glad you made it home safely. It was a pleasure meeting you and talking to you. See you next year, hopefully.
Bill Marchisella
Forum: rodboard 15 years ago
Bill Marchisella
262. Re: N.C. barbeque
I didn't know you guys were that serious about your barbeque. Thanks for the advice.
Bill Marchisella
Forum: rodboard 15 years ago
Bill Marchisella
263. Re: N.C. barbeque
Witch is better sause or Dry rub
Bill Marchisella
Forum: rodboard 15 years ago
Bill Marchisella
264. N.C. barbeque
Tom,
Glad the reception is on a Friday. Maybe this year I'll be able to sample some of the barbeque I've heard so much about. Last year, I was told these placs are not open on Sunday. Hopefully somebody can advise me as to a couple of good restaurants. Looking forward to the show.
Bill Marchisella
Forum: rodboard 15 years ago
Bill Marchisella
Tom
Will there be a mailing company to mail my purchases home ?
Thanks Bill Marchisella
Forum: rodboard 15 years ago
Bill Marchisella
Im sorry I do have your name Ash Carlton
Bill Marchisella
Forum: rodboard 15 years ago
Bill Marchisella
Its Over! We have a winner! It is acarlton@fairchil
Please email me with your name so I can fowward it to Owen @ @#$%&
Conorats!
Bill Marchisella
Forum: rodboard 15 years ago
Bill Marchisella
Do not post your email. Send it to billsreelworld@aol.com
Bill Marchisella
Forum: rodboard 15 years ago
Bill Marchisella
To all rodbuilders
I recieved a full @#$%& registration from Owen & Sandy as second prize in the contest. Since I already have it,
they were gracious enough to let me give it away. The 41st person who requests it by emailing me with their name and email address is the winner. Good luck!
Bill Marchisella
billsreelworl&
Forum: rodboard 15 years ago
Bill Marchisella
Mike
I take that statment back.
If you can cut cork with stainless leader wire like Chris Davis said, then my tool can cut cork also.
It will cut it safer because you are not holding it in your hands
Bill Marchisella
Forum: rodboard |