SPONSORS
2024 ICRBE EXPO |
Results 241 - 270 of 897
11 years ago
Lance Dupre
241. Re: Rod finishing
Rod bond doesn't dry clear. It's not made for coating threads.
Flex Coat, Threadmaster, and Pro Kote, to name a few are especially made for coating thread work.
Most rods are either painted, clear coated or left unfinished but you can add a finish to your blanks if you want by using Lumiseal or Permagloss. Do a search for those two products and you'll find several ways to apply them to you
Forum: rodboard 11 years ago
Lance Dupre
243. Re: Dobyns
Bobby, I'm sure there are many blanks by many different manufacturers that are comparable to the action of the Dobyns. It's just a matter of putting the completed rod on a testing board and comparing it with different blanks by adding weight to the tips so that you can compare the actual bend between the two.
Here's a link to the testing board.
Forum: rodboard 11 years ago
Lance Dupre
You could have accidentally dropped some finish on the threads of your seat and didn't realize it.
Forum: rodboard 11 years ago
Lance Dupre
Alcohol from Wal-Mart for clean up. Buy it in the Pharmacy section by the quart. Take my word for it and a few others here with Many years of rodbuilding experience that you'll never run into a situation where you'll need the harsh and dangerous chemicals that was recommended a few posts up.
Forum: rodboard 11 years ago
Lance Dupre
I cringe when I hear someone say "pole" or "fishing pole". It reminds me of Andy Griffith and Opie walking down that gravel road with "poles" in hand.
Forum: rodboard 11 years ago
Lance Dupre
I do the same as Matt. It's so quick and easy even my five year old Grandson can clean a grip for me in under six seconds.
Forum: rodboard 11 years ago
Lance Dupre
Those of us that builds or tries to build the lightest rods possible don't usually do tiger or decorative wraps on our rods.
Forum: rodboard 11 years ago
Lance Dupre
251. ThreadMaster One
We are now stocking the new Threadmaster One, one part rod finish from RodDancer Products. Click on the link to take you to the description and pricing.
Forum: rodboard 11 years ago
Lance Dupre
252. Re: Uneven epoxy
After putting on 6 coats and maybe even some more before it's all over with, I'd cut it all off and start fresh. Rewrap, level your rod then put on at least two thin coats of finish. That should be all you need to do.
Forum: rodboard 11 years ago
Lance Dupre
No one mentioned to be more careful when applying epoxy.
Take your time when applying your epoxy to the area near your grips and in the split area.
Use something to steady your arm and get in a comfortable position. Get closer to your work area if need to. Get your self better or more lighting above the area where applying your finish.
Take your time when applying your epoxy to the area
Forum: rodboard 11 years ago
Lance Dupre
254. Re: Att. Lance Dupre
Got it Col. Will send info requested in the morning.
Forum: rodboard 11 years ago
Lance Dupre
Ray if you'd be interested in the ones with the collar made by Backlash tools we have all sizes in stock.
Forum: rodboard 11 years ago
Lance Dupre
I contacted Rich about a year ago and asked if copies were still available. He sent an autographed hard cover copy a week later.
Forum: rodboard 11 years ago
Lance Dupre
257. Re: Reamers
If you go from the grit tape to the grit particles your taking a step backwards. Use contact cement and your problem will be solved.
Forum: rodboard 11 years ago
Lance Dupre
The SJ blanks are fast action. The CB blanks are moderate. The CB 854, as Jim stated would be your best bet for what you're looking for.
Forum: rodboard 12 years ago
Lance Dupre
roger wilson Wrote:
-------------------------------------------------------
> John,
> Very simple solution.
> 1. Use a white building bench.
> 2. Have a white floor in your rod building shop
> with NO carpet.
> 3. Have a lot of light in the rod building shop.
>
> Roger
Not very simple in my book if you have to remodel your shop just to find a few lost g
Forum: rodboard 12 years ago
Lance Dupre
I finally got around to adding the new Phenix Split reel seats to my website. Some of you guys were waiting patiently for me to get them on there and I appreciate the patience but now it's done and they're ready to ship out.
Sizes available are from 11.0mm to 16.0mm. Smaller sizes from 9.0 through 10.5 will be availabke in about eight weeks or so. They are in the process of being manufactured
Forum: rodboard 12 years ago
Lance Dupre
Justin I'd drop the 12. Use one 10 then run 8 s on out to the tip.
Forum: rodboard 12 years ago
Lance Dupre
Roger, i've got to say you're one well oiled shipping machine.
Forum: rodboard 12 years ago
Lance Dupre
265. Re: New Web Site
The music nearly knocked me out of my chair when it opened up. Needless to say I got right out of it before looking at anything.
Forum: rodboard 12 years ago
Lance Dupre
266. Re: 2013 Expo
Steve very logical choices but I like your first one the best.
Forum: rodboard 12 years ago
Lance Dupre
268. Re: cross wrap dvd
David I never did get an email from you. Please use the address below to get in touch with me. I have them in stock.
swamplandrodsATmsn.com. Replace the AT with @ symbol.
Forum: rodboard 12 years ago
Lance Dupre
269. Re: Smampland
Bill that's not hot sauce, it's a vaporizer to rub on your chest when you are conjested.
Forum: rodboard |