SPONSORS
2024 ICRBE EXPO |
Results 181 - 210 of 3404
10 years ago
Raymond Adams
181. Re: Mike Barkey
Mike is truley a class act and I'm sadened beyond words to hear that he is not doing well. Mike has been an insperation to be for quite a few years and he is one of the folks I was so excited to finally meet at the one Expo I was able to attend in 2010. It was he who got me started creating & distrbuting rod building tutorials and gave me the idea for my Library website.
I am going to spen
Forum: rodboard 10 years ago
Raymond Adams
182. Re: Custom Eva
Inlay it. That is about the only way and Billy V. can help you with that.
Forum: rodboard 10 years ago
Raymond Adams
Try a scalpel it's far sharper. You will still change them often though. Also, a double edge old school razor blade is sharper than a single edge blade.
Forum: rodboard 10 years ago
Raymond Adams
I have not heard anything about Bill closing the business and the website is still up with the same URL.
I had a bit of the same darkening problem but only when I tried to rush things and not wait for it to dry completely.
Forum: rodboard 10 years ago
Raymond Adams
Sorry again folks,
I'm having issues posting Eugene's file on my library site. The site IT dept will work on it but until they get back to me, just Email me and I will send you a copy of the excel spreadsheet.
Forum: rodboard 10 years ago
Raymond Adams
Sorry everyone I was called away Sunday and didnt get time this morning to get Eugene's file posted.
Will get the file up as soon as possible after I get home from work today.
Forum: rodboard 10 years ago
Raymond Adams
I've received Eugene's excel spreadsheet and will post it on my website The Rod Builder's Library by Sunday afternoon for all
to access.
Thanks Gene!
Forum: rodboard 10 years ago
Raymond Adams
My wife saw these nice looking pool cue cases at a Dollar Tree (99cent) store and brought a couple home for me to check out for rods.
At first glance, I thought they could only be used for some Fly rods maybe but after seeing that the inside could be pulled out it seems like some spininning & casting rods would even fit too.
Maybe not a good choice for a nice custom rod but for 99cents
Forum: rodboard 10 years ago
Raymond Adams
I'll second the point of getting as much info about the end user's preferences about how, where, & what he targets most.
It's really nice to give a rod as a gift but it can be disappointing to both the giver and the user if the rod isn't quite what he likes to use per the power, action, length, & such.
That said, the only good advice about rod specs I can offer is...if he targets
Forum: rodboard 10 years ago
Raymond Adams
We all like to think "measure twice and cut once" but........aint nobody perfect!
glad ya caught it (pardon the pun) before using the heat gun.
Forum: rodboard 10 years ago
Raymond Adams
I got an email from a user who won a rod in an @#$%& that he thought was built by me but it turns out that the rod was built by CTRS.
I think I've seen that name here a few times and would like to find their contact info and forward it to the customer.
THANKS!
Forum: rodboard 10 years ago
Raymond Adams
On wide areas to cover like a butt wrap, decal, or what not, use a wider brush or other wide tool like a playing card to apply the finish. It isn't nessisarry but it helps some folks get an even application.
Forum: rodboard 11 years ago
Raymond Adams
196. Re: shrink wrap
Chester hit the nail on the head!
I picture a person with new rod in one hand and a razor or scissors in the other. What happens next aint pretty.
OOOOOOPS! now comes the cursing.
Forum: rodboard 11 years ago
Raymond Adams
Ya got that right on Terry! I won a trout tournament using a shallow running W.Wart in 08.
Kyle,
You can copy a Storm W.Wart image and make your own decal but beware that you very well could be violating copy-write law in doing so without the copy-write holder's permission. Becareful what & where the image comes from or better yet contact Storm and I bet they send you an image or maybe
Forum: rodboard 11 years ago
Raymond Adams
Bill,
A Rod Maker subscription is far less expensive than any comperable drug prescription!
Forum: rodboard 11 years ago
Raymond Adams
I just received a few rod blanks via UPS and it was obvious that the sender reads Rod Maker and took Bill Colby's article to heart.
Ya know, sometimes those of us who submit articles and are fortunate enough to get them published, wonder if our work gets used by or is helpful to the readers. Clearly, Bill's article was taken to heart and used at least by one reader.
Thanks Bill and Thanks
Forum: rodboard 11 years ago
Raymond Adams
Without my subscription I would need several prescriptions!
Forum: rodboard 11 years ago
Raymond Adams
204. Re: Fenwick blanks
I am always looking for old Fenwick freshwater blanks! Folks in my dad's neck of the woods won't use
anything else if they can help it and I like them alot too.
click my name and email your price please.
THANKS
Forum: rodboard 11 years ago
Raymond Adams
Maybe you can tell by the title of my post that I've been watching TV! LOL
That said, how many of you have done some hillbilly/homeboy bartering to get what you needed to either build a rod or did some rod work to get something else you needed in return?
Crafters and rod builders alike are some savy folks so I'm sure this will be an entertaining and informative subject.
Back in the da
Forum: rodboard 11 years ago
Raymond Adams
I'm sorry to miss that event again....Such a superb gathering and fellowship with an exclamation point on fellowship bar none.
The Expo is a fantastic event but the Lamiglas open house is a completely different animal that should not be missed if possible.
Forum: rodboard 11 years ago
Raymond Adams
Here is a blank suggestion!!!!!!
sorry I could not help myself.....LOL
Forum: rodboard 11 years ago
Raymond Adams
That will happen with all brands of metallic thread if you use the "sewing machine" double disc type of tensioner but I have found that FishHawk metallics will take that tensioner better than most.
As said above, tension the spool and not the thread and problem solved with any brand though.
Forum: rodboard 11 years ago
Raymond Adams
209. Re: custom cork
JP has done a grip for me and I cant say enough!
Forum: rodboard 11 years ago
Raymond Adams
I was fortunate to hear Gary in person once and I love to listen anytime he speaks.
Thanks!
Forum: rodboard |