SPONSORS
2024 ICRBE EXPO |
Results 181 - 190 of 190
12 years ago
Jim Scott
David,
In my research on the forum about painting i see your name come up a bit, especially in regards to Fusion Spray paint. Would it be ok if i emailed you directly with painting questions rather than bore the rest of the forum first timer questions.
Jim Scott
Forum: rodboard 12 years ago
Jim Scott
182. First EVA handle
Good Evening Everyone,
Just finished stripping old 7' f/glass spinning rod. getting ready to order grips. i have only used cork previously and will be using EVA on this build. The butt diameter is about 5/8'' and the blank diameter at 16'' up from butt is 9/16''. Should i order 3/8'' bore eva or 1/2'' bore. I know it stretches and can be reamed just want to make the job easier. Thanks for the ad
Forum: rodboard 12 years ago
Jim Scott
Stripper Rocks! I sanded with 220 and was getting nowhere, moved down to 100 and was still makeing no headway. tried 80 which removed the glue but was too afraid of harming blank. Applied some old stripper i had and handle glue came off much easier. I now intend to strip the entire blank since it works so well. Where do you get CitriStrip, Does WallyWorld or HD carry it?
Forum: rodboard 12 years ago
Jim Scott
I am also in the middle of re-doing an old glass spinning rod, just for practice. I removed the eva handle and am left with a good amount of glue. How do you recommend removing this glue, stripper? Sanding?. And when removing the finish with sanding what grit do you start with? Love this forum..
Jim Scott
Forum: rodboard 12 years ago
Jim Scott
Thats exactly what i was looking for Billy, I will place an order soon for that.
On a side note, since you are the "Grip Guru", i was thinking of doing a snakeskin inlay in the grip and epoxy it so it is almost level with the rest of the cork / eva. do you see a problem with that idea. i know the epoxy would scratch but i thought if i left it recessed a little it would be ok. Don't w
Forum: rodboard 12 years ago
Jim Scott
Thank you Alex and Brandon for the Feedback.
Alex, I was also thinking that a 8' rod along with a guide set up you suggest would mean longer casts to get to wary fish. Does that extra foot in rod lenght make that much of a difference in casting distance? is a two piece rod an option since i drive a jeep and i can't hardly fit the dog in there let alone a 8' stick.
Brandon, I may take you up
Forum: rodboard 12 years ago
Jim Scott
187. Next Build Wish List
Hello and Happy New Year,
Getting ready to start my fourth build. The kids got me a gift certificate from one of the sponsors on the left for Christmas. I am looking for support on starting off correctly. I live and fish in Southwest Florida for Snook, Redfish & Trout on inshore grassflats in Charlotte Harbor and Lemon Bay. i am looking for the best setup for an inshore slam. I either thro
Forum: rodboard 12 years ago
Jim Scott
Thank you for all of the comments.
I just added a couple picture links to the original post. You can see what i mean about fingers and thumb on the forgrip. Perhaps its the cracker way i hold my stick. At least i don't hold the reel on top like a lot of the tourists down here do.
J Scott
Forum: rodboard 12 years ago
Jim Scott
189. Reel Seat Placement
Hello all,
I am a real newbie (only 3 rods built) and have made a major mistake but i believe it may be for the best. I used the Aero Split Grip kit from Mudhole on all three of my spinning rods. Like most men i didn't follow directions or look at the catalog photos and installed the Aero seat backwards (according to catalog picture) on all three rods. The seat fits very comfortable in my hand a
Forum: rodboard 12 years ago
Jim Scott
190. Re: AERO Reel Seats
Hello all,
I am a newbie (only 3 rods built) and have made a major mistake but i believe it may be for the best. I used the Aero Split Grip kit from Mudhole on all three of my spinning rods. Like most men i didn't follow directions or look at the catalog photos and installed the Aero seat backwards on all three rods. The seat fits very comfortable in my hand and had no idea i put it on backward
Forum: rodboard |