SPONSORS
2024 ICRBE EXPO |
Guide advice
Posted by:
Mark Dining
(---.hsd1.ca.comcast.net)
Date: May 28, 2020 10:48PM
I am planning my first rod build. It is going to be a casting rod for casting swimsuits on 1/2-1 oz. jigheads, for halibut, from shore in the SF Bay. I plan on using a Rainshadow IMMP70H blank. I'm going for light weight as I'm 61.
I intend to use 12,10, 8, 6, 6, 6, 6, 6, 6, 6, 6 as my layout. I have two questions: am I even going to notice the difference between titanium and SS16 Alps MXN guides? The bigger question is whether to use single foot guides for the 6mm, or stick with two foot guides, as I will mostly be on a rock wall. I appreciate any opinions and experience! Mark Re: Guide advice
Posted by:
Tom Kirkman
(Moderator)
Date: May 29, 2020 08:56AM
You could drop the 10 and 8 and just go with all 6's after the 12 - the drop will be just as gradual since the guides are not stacked up against each other.
If you use the Forhan locking wrap the single foots will be secure and assuming these are low frame guides they shouldn't be very prone to shifting or moving anyway. ............... Re: Guide advice
Posted by:
ben belote
(---.zoominternet.net)
Date: May 29, 2020 09:33AM
Mark, my flipping rods all use single foot #6 guides for over 50 years..the abuse a flipping rod takes is like no other, rod poking off snags with guides beating on limbs the locking wrap kept the guides tight to the rod to this day..no shifting of guides what so ever..the locking wrap has eliminated double foot guides for me. Re: Guide advice
Posted by:
Phil Ewanicki
(---.res.spectrum.com)
Date: May 29, 2020 09:51AM
Single-foot guides save weight, save time wrapping, and work well on one-hand rods. I would stick to two-footed guides for two-handed rods casting larger weights for bigger fish. Re: Guide advice
Posted by:
Mark Dining
(---.hsd1.ca.comcast.net)
Date: May 29, 2020 10:12AM
Thank you! Re: Guide advice
Posted by:
Mark Dining
(---.hsd1.ca.comcast.net)
Date: May 29, 2020 10:13AM
Thank you! Re: Guide advice
Posted by:
Mark Dining
(---.hsd1.ca.comcast.net)
Date: May 29, 2020 10:13AM
Thank you! Re: Guide advice
Posted by:
Norman Miller
(---)
Date: May 29, 2020 10:47AM
Eleven guides on a 7’ Heavy power rod seems like a little over kill to me. Depending on the reel size I would use a double foot 12 stripper if using a higher profile reel or a double ft 10 stripper with a low profile reel. I would follow the stripper chosen with a size 8 or 6 double ft guide, respectively, for the extra strength they provide. The runners could all be single foot guides and should cause no problems. Titanium guides are a little lighter, but a little more brittle, and more expensive. The major advantage of titanium is their corrosion resistance. Play around with your guide train and see what layout you like the best.
Norm Re: Guide advice
Posted by:
Mark Dining
(---.hsd1.ca.comcast.net)
Date: May 29, 2020 10:59AM
I have been basing my design on Batson blueprints, but I am not tied to using Alps. Which guides would you suggest? I see Fuji belly and running guides - 4 belly and 6 running? And what would you use for the 12? Re: Guide advice
Posted by:
Mark Dining
(---.hsd1.ca.comcast.net)
Date: May 29, 2020 11:25AM
Thank you! Re: Guide advice
Posted by:
Norman Miller
(---)
Date: May 29, 2020 02:27PM
Alps or Fuji are both very good guides. I personally like Fuji, but that’s me. The double foot Fuji KW guides would work quite well, and Fuji also makes both KB and KT running guides in a size 6 and they are quite durable. The only difference between the KB and KT guides is the size of the foot, which is longer and wider with the KB guides. The KBs are designed to be used in the mid section (belly) of the blank to resist the pullout forces generated when the blank is fully loaded. The KT guides have a shorter and narrower foot because the pullout are nearly as great in the tip section. You can these guides in a corrosion control finish, or in titanium. I still think 11 guides are too many, I usually use 9 to 10 guides total on a 7’ rod, and that’s using microguides. Other people like more guides and still others less. It up to you and what you feel most comfortable using. It is one of the things that make a rod custom.
Norm Re: Guide advice
Posted by:
Mark Dining
(---.hsd1.ca.comcast.net)
Date: May 29, 2020 10:27PM
Are you still a fan of the SeaGuide RS? I can't quite see spending for Torzite at this time. I'm thinking Alps with Fuji Arowanna SIC top, or possibly Seaguide RS. Re: Guide advice
Posted by:
Norman Miller
(---.lightspeed.jcsnms.sbcglobal.net)
Date: May 29, 2020 10:40PM
You don't need Torzite guides. SeaGuide makes some very nice guides with the RS or zirconia ring inserts that will work well. There are a lot of nice guides out there. American Tackle and PacBay also have titanium frames. Pick a brand and go with it.
Norm Re: Guide advice
Posted by:
Mark Dining
(---.hsd1.ca.comcast.net)
Date: May 29, 2020 10:45PM
Thanks, I'm sure it won't be the last rod I'll build. Sorry, only registered users may post in this forum.
|