SPONSORS
2024 ICRBE EXPO |
Fuji SIC Guides
Posted by:
Nate Fredrickson
(---.hfc.comcastbusiness.net)
Date: January 23, 2020 04:52PM
While trying to order a Fuji FST (silicon carbide ring) tip top for a bass rod build today, I noticed they were not listed on the Mudhole website and Janns Netcraft had them on clearance. Other guides with SIC rings appeared to be sold out or in short supply as well. It made me wonder if they are reducing the use of SIC as a ring material. The representative at Mudhole wasn't sure if this tip top had been discontinued and wasn't sure why other SIC products were not in stock. Has anyone heard? Re: Fuji SIC Guides
Posted by:
Lynn Behler
(---.97.252.156.res-cmts.leh.ptd.net)
Date: January 23, 2020 05:40PM
FC tops have been discontinued, I've been using LG's Re: Fuji SIC Guides
Posted by:
Jim Ising
(---.dthn.centurylink.net)
Date: January 23, 2020 05:54PM
The F Top is slated to be discontinued but there is ample supply in the pipeline. You should be able to get it although some dealers are trying to clear it out. We currently have a good supply. The FST is a Gunsmoke frame and Gunsmoke is being replaced by Fuji's new Gunmetal finish with enhanced corrosion protection. The top slated to replace the F is the LG, a top that has been in service for a couple of years now and has a great track record. It is available in MANY frame/ring combinations including Gunmetal SiC.
SiC is alive and well and has undergone an upgrade to "Slim SiC" in Gunmetal frames (tops do not have Slim SiC, only guides). Any perceived shortage is likely due to dwindling Gunsmoke frames as they are slowly being replaced by Gunmetal. The best replacement for you will probably be a GMLGST and should be available from many dealers. Hope this helps. Re: Fuji SIC Guides
Posted by:
Lynn Behler
(---.97.252.156.res-cmts.leh.ptd.net)
Date: January 23, 2020 06:14PM
What Jim said! lol Re: Fuji SIC Guides
Posted by:
Nate Fredrickson
(---)
Date: January 23, 2020 06:25PM
Very helpful. Thank you both. Glad to hear sic isn’t going away.
Jim: On the Gmlgst, the two side braces are fixated to the top of the tube. Do you have any concerns about the brace separating from the top of the tube in situations with heavy flipping sticks and braid with this model? I’ve replaced several different tops from other manufacturers that utilize this design. The Fst doesn’t have this issue since the brace is strengthened by wrapping underneath the tube instead. Re: Fuji SIC Guides
Posted by:
Lynn Behler
(---.97.252.156.res-cmts.leh.ptd.net)
Date: January 23, 2020 06:34PM
I think Get - Bit lists them. Might want to call them. Re: Fuji SIC Guides
Posted by:
Mark Talmo
(---)
Date: January 23, 2020 06:43PM
Nate,
There you have it from the man-of-the-hour, Jim Isling. I have also been using Fuji LGs but either CCLGAT or BCLGAT, not SiC. While SiC possesses the best heat dissipation of any ring material and is surpassed only by Torzite in other considerations, it is my understanding it is quite brittle and can be easily fractured leading to the ring coming out of the frame. Although I consider myself to be very careful/gentle with my rods, Murphy’s Law prevails and I avoid the possibility of not being able to use my rod at the most inopportune moment. All manufacturer’s ceramic rings are virtually groove-proof, even the lesser expensive units, with Fuji’s Alconite somewhere in the middle of price and ultimate performance as well. The only time I use a Fuji ring other than Alconite is when it is not available in a particular frame. Admittedly being possibly more numb than most, I am also a cheap bastard; LGST 4.5 = $5.52, GMLGST 4.5 = $5.59, BCLGAT = $2.95. If you are @#$%&-bent on SiC then so be it, good for you and go for it. IMO, Alconite is more than required for more than 95% of any fishing situation. Mark Talmo FISHING IS NOT AN ESCAPE FROM LIFE BUT RATHER A DEEPER IMMERSION INTO IT!!! BUILDING YOUR OWN SIMPLY ENHANCES THE EXPERIENCE. Re: Fuji SIC Guides
Posted by:
Lynn Behler
(---.97.252.156.res-cmts.leh.ptd.net)
Date: January 23, 2020 07:46PM
If I was only using one SIC ring on a rod, it would be the tip ring. Re: Fuji SIC Guides
Posted by:
herb canter
(---.atmc.net)
Date: January 24, 2020 06:58PM
I agree with Lynn , even though SIC is an incredibly hard ceramic and being such can crack if whacked against something it is a superb tip top material . If you're careful and inspect regularly with a cotton ball to check if any cotton catches within the ring which would indicate a crack it's still worth having and utilizing as a tip top material because of it's heat dissipation properties and extreme hardness.
Always wise to carry a spare tip top though. Re: Fuji SIC Guides
Posted by:
Jim Ising
(---.dthn.centurylink.net)
Date: January 27, 2020 03:21PM
Nate, at one time Fuji called tops "spinning tops" or "casting tops" based on the brace-over or brace-under design. The LG seemed to mark the moment in time when Fuji concluded that the brace-over design was more than strong enough for casting. As far as I know, we have not had a single LG returned because the braze popped loose on a casting rod.
Mark, while TORZITE® is more "resilient" than Sic (it will flex slightly more without fracturing), it is not quite as hard. But, when all characteristics are combined; flex, resistance to chip, heat dissipation, etc, TORZITE® can be pared down to a thinner diameter without a loss of "character" (all features combined) compared to SiC. Although heat dissipation can be a very real issue for tuna fishermen or say, bonefish on 6-pound mono, it's not very important in the 1-minute fight most of us deal with on a bass, trout, or walleye. The more direct (and real) benefit comes from the degree to which a given ceramic can be polished. I talk with anglers all the time, including pros, who are absolutely sure that TORZITE® provides a smoother feel and a longer cast. I'm pretty sure this is due to TORZITE® accepting a higher degree of polish than any other ring material available, with SiC a close second. A word you have used in your post has been banned from use. Please use a different word or contact the forum administrators.
Sorry, only registered users may post in this forum.
|