SPONSORS
2024 ICRBE EXPO |
EVA grips
Posted by:
Bill Sidney
(---.gci.net)
Date: November 17, 2011 01:14PM
I am new to the EVA grip, looking to do some work with it, so my question is what type of glue do you use on the in lay so you don't have the hard line where the 2 pices of EVA meet ??
BILL Re: EVA grips
Posted by:
Fred Yarmolowicz
(---.hsd1.nj.comcast.net)
Date: November 17, 2011 01:27PM
Weld Wood contact cement. The liquid one NOT the gel. Freddwhy (Rapt-Ryte) Re: EVA grips
Posted by:
Jeff Seabridge
(---.cmdnnj.fios.verizon.net)
Date: November 17, 2011 02:38PM
I think Billy recommends 2 coats. Let the first one dry then apply a second and let that dry to tac. He will chip in if I'm wrong. Sorry, only registered users may post in this forum.
|