SPONSORS
2024 ICRBE EXPO |
Local Rod Builder Show
Posted by:
Ron Beagles
(---.lightspeed.tblltx.sbcglobal.net)
Date: July 27, 2010 10:58PM
Tomball , Texas
Would like to know how many, maybe who would be willing to attend and participate in a local Rod Builder's meeting or show or who could or would consider sponsoring such an item? Many of us, me included cannot make it to shows in North Carolina or the west coast. We have fishing shows in Feb here in Houston, but a group that could work together might work around here - just had to ask boys, just had to ask - thanks Re: Local Rod Builder Show
Posted by:
Tom Kirkman
(Moderator)
Date: July 28, 2010 07:22AM
If you know a current fishing show promoter, talk to him and see if he'd be willing to try and recruit some rod building companies, or provide space within his show for you to do it. That's how the Expo got started. If you go it on your own, expect to have to invest a lot of money to procure space and do the necessary marketing. In fact, this is the main reason there aren't many large rod building shows. Few are willing to risk the $50,000 or so that it takes to do something like this on a large scale.
You also have to face the reality that most companies are up against economic realities that makes it impossible for them to travel, attend and display at an event where only a few dozen rod builders are going to show up. On average, it takes about 150 rod builders to support just one rod building supplier that has traveled any distance to attend and display. Of course there are a lot of other things you can do if you just want to meet other builders. Texas is loaded with custom rod builders. I know it's a big state geographically but most seem concentrated in the eastern portion. You can always test the waters by trying to have a local gathering. You could do this about anywhere, or start putting out the word that you're all going to meet at one of the fishing shows. I have about 1100 rod builders from Texas on the RodMaker subscriber list. I'd be happy to run something for you in the News section of the magazine once you have some idea of what you want to do. Just shoot me a short note about what you've got going and I'll be happy to do it. One thing is for sure, if you want something like this to happen, you have to start somewhere. .................. Re: Local Rod Builder Show
Posted by:
Ron Schneider
(---.mthmcmta01.mthoar.lr.dh.suddenlink.net)
Date: July 28, 2010 10:45AM
Hi Ron,
Your email is hidden. We would be interested in helping/attending a gathering of rodbuilders in Texas, depends on where and when. I am also considering something here in Mountain home, Arkansas next winter. Give me a holler. Best wishes, Ron Schneider Schneider's Rod Shop Mountain Home, Arkansas [www.schneidersrods.com] mtnron40@yahoo.com 870-424-3381 Re: Local Rod Builder Show
Posted by:
dave schaub
(129.230.244.---)
Date: July 28, 2010 01:02PM
Ron,
We used to have a gathering in Houston at the Allstar plant. It was great and we would have folks from all over come. I would guess that there would be about 50 or so show up. The Allstar folks were just great and would give us a tour of their facility and then we would have a little get together to show off what was brought for show and tell, and to eat and have some great fellowship. But, when they sold out, that was the end of that story. Several of us have talked about doing it again but we really dont have a good place to have such an event. i would be happy to attend but I dont know where or how we could put it back together. I must say that I learned a lot about blanks and how they are made. I also gathered some interesting assembly techniques to use. I think Bill Stevens like their rod tester and the technique she employed to test their rods (actually, we all did!!) Re: Local Rod Builder Show
Posted by:
Pat Helton
(---.dhcp.embarqhsd.net)
Date: July 28, 2010 06:12PM
Ron
Send me your e-mail address and I will send you some info on two annual shows that happen in Houston every year. Not near as big as the ICRBE and not near as many distributors but you may find some useful info and of course you will meet some great folks. I would dearly love to go to the ICRBE and meet all of the vendors and supreme rodbuilders. I understand it is a great show Pat Helton patfatdaddy@gmail,com Tom, If you think this is inappropriate please delete. Thanks Pat Re: Local Rod Builder Show
Posted by:
Bob Balcombe
(---.rb2.gh.centurytel.net)
Date: July 28, 2010 10:12PM
There is one held here in WA. State every year for at least the last 5 years in April There was approximately 125 that showed up. There were demos. an suppliers there to answer questions about their products. The bonus was you get to meet a bunch of great gals & guys Good Wraps Bob Re: Local Rod Builder Show
Posted by:
dave schaub
(129.230.244.---)
Date: July 29, 2010 08:37AM
I would bet North Carolina was closer to Texas than Washington!!! Re: Local Rod Builder Show
Posted by:
Bob Balcombe
(---.rb2.gh.centurytel.net)
Date: July 29, 2010 10:53AM
With the cost of fuel I would check out my options. The drive to WA would be vary scenic Good Wraps Bob Re: Local Rod Builder Show
Posted by:
Ron Beagles
(---.lightspeed.tblltx.sbcglobal.net)
Date: July 29, 2010 10:21PM
wow!! thanks for the info guys - I am going to get organized and start seeing what I can find out - I will get back to everyone soon - got a 5 day a week job ! but rods and fishing on the weekends, and some week nites too!! Sorry, only registered users may post in this forum.
|