SPONSORS
2024 ICRBE EXPO |
here is another live and learn!!!!
Posted by:
mike burnette
(209.105.133.---)
Date: July 27, 2010 09:22PM
Making my Wounded Warrior Rod.turn my grips w/oak wood finished up great.Fitted everything in place.Have pictures on my facebook page.
All is lookin good.Glue grips and reel seat on all is good.....happy as a pig in mud!!! Build my winding check with rod build.got nice ramps...looking good so far.. Doing a underwrap of red,white and blue then gonna use silk to tie the guide on w/no cp to make the thread dissapear. Put Cp on the underwrap and is good...happier than 2 pigs in mud holes!!! Waiting for cp to dry.checking out rod grip and reel seat....WHAT oh NO...plus a few more words I have put the front grip on upside down(its split grips). Well what now???????? Leave it or fix it. Keepin mind its glued and winding check ramp made w/rod bond.Also I dont have anymore wood that matches the other ones. I used matching pieces of wood.the grain in going the same and matches. The handle feels good cuz the big side is down and it dont try to pul out of your hands...its a catfish rod. oh well !!! mike Home Town,Gretna VA Re: here is another live and learn!!!!
Posted by:
mike harris
(---.dhcp.sffl.va.charter.com)
Date: July 27, 2010 10:13PM
If it feels good, call it custom and be proud. Re: here is another live and learn!!!!
Posted by:
Steve Gardner
(---.nc.res.rr.com)
Date: July 27, 2010 11:09PM
Ditto! Re: here is another live and learn!!!!
Posted by:
Nuno Paulino
(---.cpe.netcabo.pt)
Date: July 28, 2010 06:45AM
mike harris Wrote:
------------------------------------------------------- > If it feels good, call it custom and be proud. Hehehehehehe! This the right answer. No dout about it. Abraço Nuno Re: here is another live and learn!!!!
Posted by:
Bill Stevens
(---.br.br.cox.net)
Date: July 28, 2010 09:09AM
File for patent, trademark, do marketing - State of the Art, Leading Edge Technology, Exclusive, Testimonials, Tournament Winning, Ergonometric - INCREASE PRICE BY 17.34 PERECNT! Sell concept to production builders - Apply volume discount! Build more rods!
Then the final Coup de Gras - add to the claims - CASTS 21% FURTHUR! Like the man says "any publicity good or bad is good" Take a pill and giggle! Edited 1 time(s). Last edit at 07/28/2010 09:13AM by Bill Stevens. Re: here is another live and learn!!!!
Posted by:
bill boettcher
(---.dyn.optonline.net)
Date: July 28, 2010 09:39AM
If you need too - it would drive me crazy- take both off and replace from the butt.
Or - Its the new thing that just started in Japan You got wind of it from you Japanese supplier. Bill - willierods.com Edited 1 time(s). Last edit at 07/28/2010 09:42AM by bill boettcher. Re: here is another live and learn!!!!
Posted by:
Steve Bro
(---.automatededm.com)
Date: July 28, 2010 09:59AM
Bill always provides the best advice! Steve Bro (BroCo Custom Rods) Re: here is another live and learn!!!!
Posted by:
Mark Mulanax
(---.sttlwa.dsl-w.verizon.net)
Date: July 28, 2010 12:17PM
New configuration on the handle- it does help me cast about 10% to 20% further and more accurately. (Your claim to fame on this handle)
Again best words I saw "CALL IT A CUSTOM" and leave it alone. Am willing to bet not many will notice if you don't say anything Just my $0.02 worth. Mark Re: here is another live and learn!!!!
Posted by:
mike burnette
(209.105.133.---)
Date: July 28, 2010 01:04PM
That what I was thinking...
"Call it Custom" thanks all! mikeb Home Town,Gretna VA Re: here is another live and learn!!!!
Posted by:
dave schaub
(129.230.244.---)
Date: July 28, 2010 01:06PM
I bet there are more USABLE advances from mistakes than from trying. Go with my old
1960's way of life--IF IT FEELS GOOD, DO IT! dave Re: here is another live and learn!!!!
Posted by:
bill boettcher
(---.dyn.optonline.net)
Date: July 28, 2010 03:24PM
-IF IT FEELS GOOD, DO IT!
That got me in a lot of trouble in my younger days LOL Bill - willierods.com Sorry, only registered users may post in this forum.
|