I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

o-ring size
Posted by: Michael Sledden (---.dsl.emhril.sbcglobal.net)
Date: July 03, 2010 09:02AM

Anyone know the exact size of the o-ring for the Renzetti rod supports. I have a place to buy them, just want to make sure I get the correct size. I looked on here with a search and none of the replies I find say the exact size.

Options: ReplyQuote
Re: o-ring size
Posted by: Dennis Danku (---.dyn.optonline.net)
Date: July 03, 2010 11:32AM

2-133

Options: ReplyQuote
Re: o-ring size
Posted by: roger wilson (---.hsd1.mn.comcast.net)
Date: July 03, 2010 12:57PM

Mike,
It is very easy to go to your local hardware store, go to the plumbing department and pick up the O ring of choice that will fit your rod suppoirt for about 15 cents each.

Roger

Options: ReplyQuote
Re: o-ring size
Posted by: roger wilson (---.hsd1.mn.comcast.net)
Date: July 03, 2010 12:58PM

Mike,
The only purpose that O rings serve is to cushion the rod from the rollers. Any O ring that fits will work just fine. If they break or wear out or rot, simply put on another one.
Roger

Options: ReplyQuote
Re: o-ring size
Posted by: Jim Williams (---.br1.sho.az.frontiernet.net)
Date: July 04, 2010 04:11PM

My local small town Ace Hardware has "O" rings. I purchased a larger ring with a smaller diameter O ring from them for a different purpose. I cannot say for sure they have the O rings you want because I only looked for what I wanted. They seemed to have a good selection of O rings though.

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster