SPONSORS
2024 ICRBE EXPO |
ceramic eyes
Posted by:
ricky espenschied
(---.dhcp.missouri.edu)
Date: February 24, 2010 01:06PM
anyone know where to get ceramic eyes for rod wrapper Re: ceramic eyes
Posted by:
Robert A. Guist
(---.nmci.navy.mil)
Date: February 24, 2010 01:27PM
Hi Ricky
Try MudHole I think that is where I got mine, but I think you have to ask for them, as they are not in the book. Bob. Re: ceramic eyes
Posted by:
ricky espenschied
(---.dhcp.missouri.edu)
Date: February 24, 2010 03:22PM
thnx Re: ceramic eyes
Posted by:
roger wilson
(---.hsd1.mn.comcast.net)
Date: February 24, 2010 05:39PM
Ricky,
Many folks simply use a rod guide to guide the thread of the rod wrapper. If you need to have the ring up in the air, you can simply take a piece of piano wire, straighten the guide foot, and then use fine copper wire to wrap the guide onto the piano wire. If you like you can make it even more permenant by using solder to make the wrap permenant. Then, simply mount the piano wire at the length and place that you desire and trim off any excess. Or, you can forget the ceramic eye and simply put a loop in the end of the piano wire, place the piano wire where you want and mount it. Take care Roger Sorry, only registered users may post in this forum.
|