I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

RE: a proposal(casting comp)
Posted by: Jerry Poindexter (---.tx.res.rr.com)
Date: October 21, 2009 09:46PM

Has the brand of line been decided yet for the casting comp at the Expo? Last I read, .010 diameter had been chosen w/ 3/8oz. lure wt., but no specific brand. I understand that the Swamp Boyz are preparing to open a can of whup on unsuspecting casters. Be forewarned! They recently retained, at great expense, a nameless Tejas subcontractor/co-conspirator who was seen w/ a large wad of cash lurking outside a NDallas business, making the drop, and leaving w/ a mystery rotating spool. Tom, I think they're gonna need ALOT of line. Will I need an admission ticket to see this?

Options: ReplyQuote
Re: RE: a proposal(casting comp)
Posted by: Gary Henderson (---.mco.bellsouth.net)
Date: October 21, 2009 09:54PM

Oh boy...here we go again. LOLOL

Options: ReplyQuote
Re: RE: a proposal(casting comp)
Posted by: Tom Kirkman (Moderator)
Date: October 22, 2009 09:10AM

Berkley Trilene XL 6lb test.

Berkley Fireline Braid 12lb test.

.....................

Options: ReplyQuote
Re: RE: a proposal(casting comp)
Posted by: Bill Stevens (---.br.br.cox.net)
Date: October 24, 2009 11:25AM

Jerry P. - do you happen to know if the "subcontactor" was strip searched by the staked out officers of the law?

Mr. Kirkman - Respectfully submitting the following for your consideration.

Most bass fishermen (bass) utilize braids that have much higher ratings the the Berkley Fireline Barid 12 lb test that you note.

Many recognize the smaller diameter line will throw furthur if all other conditions are the same such as rod length and lure weight are the same.

If this is an fact a distance only contest would the contest judge allow the use of a "larger diameter - heavier braid" such as 20 - 30 or 50 pound braid from a major manufacturer which is available from retail outlets nation wide? This should diminish the distance capabilites when comparing to the line you note in your post. The use of larger lines would certainly provide no "advantage" over those who choose to use a "smaller" line to obtain maximum distance.

The original packaging and a sample of the line shall be submitted to the judge and if necessary validation of no "funny business" by lie detector testing will be acceptable.

You careful consideration and timely reply to this request will be highly appreciated.

Swamp Boyz

Options: ReplyQuote
Re: RE: a proposal(casting comp)
Posted by: Tom Kirkman (Moderator)
Date: October 24, 2009 01:49PM

We're not fishing, we're just casting and since everybody will be using the same line, it's a mute point. Everybody will use the same line.

..............

Options: ReplyQuote
Re: RE: a proposal(casting comp)
Posted by: Bill Stevens (---.br.br.cox.net)
Date: October 24, 2009 02:41PM

Will a "backing" of another line be permitted for preloading the spool of the reel prior to the attachment of the selected approved tournament line if none of it reaches the tip of the rod during the cast?

Options: ReplyQuote
Re: RE: a proposal(casting comp)
Posted by: Tom Kirkman (Moderator)
Date: October 24, 2009 08:44PM

Yes.

........

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster