Has anyone used these finishes

Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.
Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.
Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.

Re: Has anyone used these finishes

Posted by: Earl Hamilton (121.54.92.---)

Date: July 24, 2009 10:06AM

Hi Bob.
I used to love the Epoxy Coatings epoxy. I found it gave a really tough finish. the One Coat Hibuild is a bit heavier than Flex Coat. It was I believe a popular finish in Japan, but I don't know if others have taken over since it has been some time since I have used the stuff. From what I remember It didn't yelow too quickly. As far as I know its never been available in smaller quantaties and I had to buy it by the gallon. It was however a little more touchy in regards to being affected by contaminents than FlexCoat. I've often wondered why I have not seen it mentioned more often.

Options: Reply•Quote