SPONSORS
2024 ICRBE EXPO |
Has anyone used these finishes
Posted by:
Bob Balcombe
(207.118.63.---)
Date: July 23, 2009 03:35PM
Has anyone used finishes by B D Classic or a company called Epoxy Coating Company Good Wraps Bob Re: Has anyone used these finishes
Posted by:
Tom Kirkman
(Moderator)
Date: July 23, 2009 05:13PM
Yes.
........... Re: Has anyone used these finishes
Posted by:
Bob Balcombe
(207.118.63.---)
Date: July 23, 2009 05:31PM
What is your experience with these products Good, Bad or are they equal to what else is on the market.? Good Wraps Bob Re: Has anyone used these finishes
Posted by:
Tom Kirkman
(Moderator)
Date: July 23, 2009 05:38PM
They are similar to all the other epoxies. I find them all to work pretty well.
........... Re: Has anyone used these finishes
Posted by:
Bob Balcombe
(207.118.63.---)
Date: July 23, 2009 05:41PM
Thanks Tom Good Wraps Bob Re: Has anyone used these finishes
Posted by:
Earl Hamilton
(121.54.92.---)
Date: July 24, 2009 10:06AM
Hi Bob.
I used to love the Epoxy Coatings epoxy. I found it gave a really tough finish. the One Coat Hibuild is a bit heavier than Flex Coat. It was I believe a popular finish in Japan, but I don't know if others have taken over since it has been some time since I have used the stuff. From what I remember It didn't yelow too quickly. As far as I know its never been available in smaller quantaties and I had to buy it by the gallon. It was however a little more touchy in regards to being affected by contaminents than FlexCoat. I've often wondered why I have not seen it mentioned more often. Re: Has anyone used these finishes
Posted by:
Bob Balcombe
(207.118.63.---)
Date: July 24, 2009 12:56PM
Earl from what I have been able to find out, It is mostly sold in large quantities. May be that is why most builders do not use it Good Wraps Bob Sorry, only registered users may post in this forum.
|