SPONSORS
2024 ICRBE EXPO |
what sdhesive?
Posted by:
David Swiderski
(---.dsl.bngr.epix.net)
Date: January 22, 2009 11:30AM
For grip inays do you folks use? I've looked at some of the eliptical designs as well as other designs and was wondering what adhesive was used to gloe up the different colors before turning.
[www.rodbuilding.org] The above link is an example, by paul rimbeck Re: what sdhesive?
Posted by:
Tom Kirkman
(Moderator)
Date: January 22, 2009 11:35AM
EVA? Contact Cement.
..................... Re: what sdhesive?
Posted by:
David Swiderski
(---.dsl.bngr.epix.net)
Date: January 22, 2009 11:38AM
will be using lamarcomposite cork Tom Re: what sdhesive?
Posted by:
Tom Kirkman
(Moderator)
Date: January 22, 2009 11:44AM
Then you have several options. Titebond II or III. Or, any good 2-part epoxy.
.............. Re: what sdhesive?
Posted by:
Mike Barkley
(---.try.wideopenwest.com)
Date: January 22, 2009 02:58PM
Like Tom, I use Contact cement for EVA, Titebond II for everything else Mike (Southgate, MI) If I don't want to, I don't have to and nobody can make me (except my wife) cuz I'm RETIRED!! Re: what sdhesive?
Posted by:
William Bartlett
(---.proxy.aol.com)
Date: January 22, 2009 04:36PM
Titebond II is good, but Titebond III is better because it's waterproof. Bill in WV Re: what sdhesive?
Posted by:
David Swiderski
(---.dsl.bngr.epix.net)
Date: January 22, 2009 05:36PM
Thanks folks. I have some Titebond III here. Sorry, only registered users may post in this forum.
|