I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

what sdhesive?
Posted by: David Swiderski (---.dsl.bngr.epix.net)
Date: January 22, 2009 11:30AM

For grip inays do you folks use? I've looked at some of the eliptical designs as well as other designs and was wondering what adhesive was used to gloe up the different colors before turning.

[www.rodbuilding.org]

The above link is an example, by paul rimbeck

Options: ReplyQuote
Re: what sdhesive?
Posted by: Tom Kirkman (Moderator)
Date: January 22, 2009 11:35AM

EVA? Contact Cement.

.....................

Options: ReplyQuote
Re: what sdhesive?
Posted by: David Swiderski (---.dsl.bngr.epix.net)
Date: January 22, 2009 11:38AM

will be using lamarcomposite cork Tom

Options: ReplyQuote
Re: what sdhesive?
Posted by: Tom Kirkman (Moderator)
Date: January 22, 2009 11:44AM

Then you have several options. Titebond II or III. Or, any good 2-part epoxy.

..............

Options: ReplyQuote
Re: what sdhesive?
Posted by: Mike Barkley (---.try.wideopenwest.com)
Date: January 22, 2009 02:58PM

Like Tom, I use Contact cement for EVA, Titebond II for everything else

Mike (Southgate, MI)
If I don't want to, I don't have to and nobody can make me (except my wife) cuz I'm RETIRED!!

Options: ReplyQuote
Re: what sdhesive?
Posted by: William Bartlett (---.proxy.aol.com)
Date: January 22, 2009 04:36PM

Titebond II is good, but Titebond III is better because it's waterproof.

Bill in WV

Options: ReplyQuote
Re: what sdhesive?
Posted by: David Swiderski (---.dsl.bngr.epix.net)
Date: January 22, 2009 05:36PM

Thanks folks. I have some Titebond III here.

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster