SPONSORS
2024 ICRBE EXPO |
5 pc 10+' rod?
Posted by:
Aleks Smith
(---.cpe.net.cable.roger)
Date: August 30, 2007 01:29AM
Well the thread basically sums it up, wouldn't mind doing a conversion from a fly rod, looking for something in the 4-8 lb line rating giver or take.
Thanks! Re: 5 pc 10+' rod?
Posted by:
Dave Orr
(---.nt.interNORTH.net)
Date: August 30, 2007 11:08AM
What size lures/bait are you going to throw?
I would suggest a 6 to 8wt blank depending on lure/bait weight. A general rule of thumb is blank wt/16 i.e a 6 wt would be 6/16 ounces or 3/8ths ounces while an 8 wt tosses 1/2 ounce lures quite nicely. CTS has 2 to 9 wt blanks in 2 to 6 piece up to 11 ft. Regards Dave Fishing is Life the rest is just Details Re: 5 pc 10+' rod?
Posted by:
Spencer Phipps
(---.ptld.qwest.net)
Date: August 30, 2007 11:18AM
CTS is the way to go. I know of a 9 ft. 6 in., 7 piece, 7 wt blank that may work. Not a sponsor so e mail me if you don't know the one I'm thinking of. Re: 5 pc 10+' rod?
Posted by:
Aleks Smith
(---.cpe.net.cable.roger)
Date: September 02, 2007 04:08PM
Thanks for the responses guys. I plan on using the rod for float fishing in small creeks. I am liking the 11 foot 6 piece rod that CTS has to offer. I am thinking a 6 wt would be fine for these steelhead as they rarely get over 5lbs. Any general ideas on what the price would be to have one of these built?
Thanks Edited 1 time(s). Last edit at 09/02/2007 04:09PM by Aleks Smith. Re: 5 pc 10+' rod?
Posted by:
Spencer Phipps
(65.197.242.---)
Date: September 03, 2007 01:07AM
Hard to tell with no info on the components, etc. you want. Re: 5 pc 10+' rod?
Posted by:
Aleks Smith
(---.cpe.net.cable.roger)
Date: September 03, 2007 02:00PM
Honestly not looking for anything special, regular reelseat and cork. Have never built a rod so I don't know about guides, but I'm not looking for a piece of art, just a rod to fish with.
Thanks! Re: 5 pc 10+' rod?
Posted by:
Spencer Phipps
(---.ptld.qwest.net)
Date: September 05, 2007 10:09AM
Twice the blank cost would be about right. Re: 5 pc 10+' rod?
Posted by:
Aleks Smith
(---.cpe.net.cable.roger)
Date: September 05, 2007 01:32PM
Thanks Sorry, only registered users may post in this forum.
|