SPONSORS
2024 ICRBE EXPO |
Amtac wrapper parts
Posted by:
Dave Parrillo
(---.prov.east.verizon.net)
Date: April 13, 2007 10:54PM
I just purchased a used American Tackle power wrapper. It has an 8' bed, I would like to get an extension because I build a lot of surf rods, mainly 10' rods. Does anyone know of a source where I could purchase a bed extension and possibly another roller support? Also, I did not get the thread carriage with it, does anyone actually use it? It doesn't look like the greatest carriage design.Thanx Re: Amtac wrapper parts
Posted by:
Spencer Phipps
(---.ptld.qwest.net)
Date: April 14, 2007 12:45AM
The AmTack, Pac Bay, Batson, and Custom Power Wrapper all have the same bed piece and you will have no problem getting another from any of the sponsors FishStick4U for instance. The roller supports are all different designs, but they appear to be the same height on all the Batson, Pac Bays and Am Tack. The CPW is different. The carriage or upgraded carriages from any of the above will work as they all run in the same slot. The CPW has quite a few extras also that will fit yours, but aren't available elsewhere. Re: Amtac wrapper parts
Posted by:
Dave Parrillo
(---.prov.east.verizon.net)
Date: April 14, 2007 05:00PM
I should say I was told this is an American tackle wrapper by the guy I bought it from. It says "Caxin Rod Craft" on it. Can anyone confirm? Re: Amtac wrapper parts
Posted by:
Mud Hole Custom Tackle
(---.229.8.67.cfl.res.rr.com)
Date: April 15, 2007 11:19PM
All the parts you could need, including the extra 4ft beds:
[shop.mudhole.com] Regards. Team Mud Hole Custom Tackle Web: [www.mudhole.com] Email: sales@mudhole.com Toll Free Phone #: 1-866-790-RODS (7637) Stay Connected with us: FaceBook: [www.facebook.com] YouTube: [www.youtube.com] Instagram: [www.instagram.com] Tik Tok: Tik Tok: [www.tiktok.com] Twitter: @mudholetackle Re: Amtac wrapper parts
Posted by:
Dave Parrillo
(---.prov.east.verizon.net)
Date: April 16, 2007 12:32PM
Thank you Mudhole, I received your email and placed my order. Sorry, only registered users may post in this forum.
|