I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

6350 guide spacing
Posted by: Jess Brindisi (---.hsd1.va.comcast.net)
Date: April 02, 2007 09:26PM

OK. I've got a BRVSG53 roller Stripper, a BSTLG20, 16, 12, 12 and a roller top on a RT6350 blank. My foregrip is 10 inches. Any starting points on guide spacing? I've played with the static line test and can't seem to get it just right. I feel like I've got proper clearance for winds ons, I just need to get the spacing correct. Anyone out there have a similar setup with some starting points for spacing?

Thanks

Jesster

Options: ReplyQuote
Re: 6350 guide spacing
Posted by: Bob Balcombe (---.dyn.centurytel.net)
Date: April 03, 2007 02:36AM

Try starting with your #16 guide about 24 to 28 inches from the center of the reel seat and adjust the rest accordingly. What is wrong with the spacing you have found?
Good Wraps Bob

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster