SPONSORS
2024 ICRBE EXPO |
thread spool sticker label rant!
Posted by:
Bruce Robb
(---.fai.acsalaska.net)
Date: November 19, 2006 04:25PM
NASA can glue a thermal tile onto a Shuttle and make it stick through re-entry, but the thread companies can't keep a thread spool sticker from falling off before the thread is used up. Grrrrrr! Pesco Ergo Sum Re: thread spool sticker label rant!
Posted by:
James(Doc) Labanowski
(---.proxy.aol.com)
Date: November 19, 2006 04:53PM
Try writing on the spools as soon as they come in with a thin line sharpie. You have just hit on one of the worlds great secrets. Why you cant hear what anyone says on a loud speaker is another. Re: thread spool sticker label rant!
Posted by:
Anonymous User
(Moderator)
Date: November 19, 2006 05:11PM
The end of the spool isn't flat - there are "spoke" edges that the sticker has to try and hang onto. Which, of course, it can't.
............. Re: thread spool sticker label rant!
Posted by:
Michael Shea
(203.57.223.---)
Date: November 19, 2006 06:21PM
Here I was thinking it must have been my technique that causes the labels to come off quite quickly.
These days the first thing I do is ensure it is stuck down well. They come barely stuck on from the factory. Tom is corrrect with the spokes and number of empty areas that the sticker cannot stick to, but you'd think that A) the factory could get them on straight which would help a little bit since there is an edge all the way around to stick the label on, and B) stick them on well, or use better adhesive. Re: thread spool sticker label rant!
Posted by:
Lance Dupre
(---.sw.res.rr.com)
Date: November 19, 2006 08:45PM
If all I had to complain about was a sticker coming off of a spool of thread I'd be in in great shape. Re: thread spool sticker label rant!
Posted by:
Jim Sawyer
(---.hsd1.co.comcast.net)
Date: November 20, 2006 12:11AM
Ever try glue??????? If people spent more time on important things, there would be a shortage of flyrods. Re: thread spool sticker label rant!
Posted by:
Pat Helton
(---.dhcp.embarqhsd.net)
Date: November 20, 2006 10:58AM
I keep my thread in seperate boxes according to size. That way if the sticker falls off I still know what size it is. As far as color I have to ask my wife what looks good anyway.
PFD Re: thread spool sticker label rant!
Posted by:
Roger Templon
(---.proxy.aol.com)
Date: November 20, 2006 02:29PM
I totally agree with Bruce!
Rog Re: thread spool sticker label rant!
Posted by:
Anonymous User
(---.hsd1.nj.comcast.net)
Date: November 20, 2006 08:45PM
Iuse Boxxes that have Spindles to hold Thread,If a label falls off I slide it on to the Spindle it was on and number the spool on as per Doc Sorry, only registered users may post in this forum.
|