SPONSORS
2024 ICRBE EXPO |
Hollow rods for sibiki bait rigs
Posted by:
Troy Bieger
(---.proxy.aol.com)
Date: May 30, 2005 04:23PM
Does anyone know if/where you can get blanks with a hollow core and an open tip and another opening at about the point of a butt guide?
I have seen these in Offshore Angler catalog for use with sibiki rigs. They have a "funnel" shaped cone tip at the end that allows the little hooks on the sibiki to go inside the rod. Great for keeping them out of the way when not in use. I'd like to wrap one myself but haven't been able to find appropriate blanks or the funnel tip. Any suggestions would be greatly appreciated! ~Troy Re: Hollow rods for sibiki bait rigs
Posted by:
russ blanchard
(---.ri.ri.cox.net)
Date: May 30, 2005 05:28PM Re: Hollow rods for sibiki bait rigs
Posted by:
Jim Kastorff
(---.proxy.aol.com)
Date: May 30, 2005 06:17PM
I don't believe Troy is looking for the Interline rods. I saw the rods you' re looking for Troy, at the Long Beach Fishing Tackle show in feb and asked the guy running the display booth if the blanks were available and he said no and didn't really want to discuss it, had to buy the whole thing or nothing. Re: Hollow rods for sibiki bait rigs
Posted by:
Lou Reyna
(---.hr.hr.cox.net)
Date: May 30, 2005 07:41PM
The vendor was not telling you the truth, or did not know.
Merrick Tackle carries blanks and components. Do not look in the obvious place - that of the blanks section. Look in the RODS > Bronco (274-275) section of their online catalog, or see page 275 of their paper catalog, middle of the page marked "SABIKI". If you don't have an acct with them maybe someone else here can order the parts for you. Merrick Tackle Partnos. SABBLANK - Sabiki Blank SABTIP - Tip SABRING - Ring for Sabiki Rod. Lou Re: Hollow rods for sibiki bait rigs
Posted by:
Spencer Phipps
(---.hsd1.wa.comcast.net)
Date: May 31, 2005 12:08AM
Troy,
Summer Moon, Dan Craft, and others I'm sure can help you with products from the Merrick catalog if you need a retail source. Re: Hollow rods for sibiki bait rigs
Posted by:
Erik Kunz
(209.233.198.---)
Date: May 31, 2005 01:28AM
I thought I'd throw an idea out there that one of my kayak fishing buds came up with for the "Ghetto" version of a Sabiki Rod...
He used a piece of 1/2" PVC with the flared end as the rod and attached a grip and clamped a reel to the other end. Here is a link to his project... [www.norcalkayakanglers.com] Erik Re: Hollow rods for sibiki bait rigs
Posted by:
Lou Reyna
(---.88.22.149.Dial1.Atlanta1.Level3.net)
Date: May 31, 2005 02:06AM
Ghetto ver. - Interesting build using cheap materials.
Lou Re: Hollow rods for sibiki bait rigs
Posted by:
Mike Anderson
(---.nissan-usa.com)
Date: May 31, 2005 11:20AM
The Cabelas innerflow trolling rod would do a good job of this. I use these rods for Striper and they are great rods for the $$ use link below
[www.cabelas.com] Re: Hollow rods for sibiki bait rigs
Posted by:
Phil Richmond
(---.centcom.mil)
Date: May 31, 2005 04:45PM
The innerflow rods and interline rods are too narrow inside for storing sabiki rigs. The Sabiki rods are like an upside down blank, fairly thick. Re: Hollow rods for sibiki bait rigs
Posted by:
Troy Bieger
(---.proxy.aol.com)
Date: June 04, 2005 07:57AM
Guys:
Thanks so much for your help. The home made one is something I'm going to have to try, even though I'll probably end up purchasing the "proper" components and building the real deal at some point. Thanks again! ~Troy Sorry, only registered users may post in this forum.
|