SPONSORS
2024 ICRBE EXPO |
Results 61 - 90 of 1098
2 years ago
Tom Kirkman
Very excited to see so many new exhibitors on hand for the upcoming Expo-
As of December 30-
AMERICAN TACKLE
ANGLERS RESOURCE/FUJI
ARCHIE'S CUSTOM FISHING ROD HANDLES
BANANA RIVER RODS
BILL BALLOU'S CUSTOM GRIPS
CENTURY RODS
CHASE'S CUSTOM CREATIONS
COMPOSITE VENTURES
CORK4US
DECAL CONNECTION
EP'S CUSTOM ROD & REEL
HFF CUSTOM RODS
HITENA USA
JUST
Forum: rodboard 2 years ago
Tom Kirkman
As of December 8-
AMERICAN TACKLE
ANGLERS RESOURCE/FUJI
ARCHIE'S CUSTOM FISHING ROD HANDLES
BANANA RIVER RODS
BILL BALLOU'S CUSTOM GRIPS
CHASE'S CUSTOM CREATIONS
CORK4US
DECAL CONNECTION
EP'S CUSTOM ROD & REEL
HFF CUSTOM RODS
HITENA USA
MUDHOLE CUSTOM TACKLE
NORTH FORK COMPOSITES
RICH FORHAN
The NERBs
THE SOUTHERN ROD BUILDERS
RODMAKER MAGA
Forum: rodboard 2 years ago
Tom Kirkman
International Custom Rod Building Exhibitors as of November 30-
AMERICAN TACKLE
ANGLERS RESOURCE/FUJI
BANANA RIVER RODS
BILL BALLOU'S CUSTOM GRIPS
CHASE'S CUSTOM CREATIONS
CORK4US
DECAL CONNECTION
EP'S CUSTOM ROD & REEL
HFF CUSTOM RODS
HITENA USA
MUDHOLE CUSTOM TACKLE
NORTH FORK COMPOSITES
RICH FORHAN
The NERBs
THE SOUTHERN ROD BUILDERS
RODM
Forum: rodboard 2 years ago
Tom Kirkman
Expo Exhibitors
As of November 11-
AMERICAN TACKLE
ANGLERS RESOURCE/FUJI
BANANA RIVER RODS
BILL BALLOU'S CUSTOM GRIPS
CHASE'S CUSTOM CREATIONS
CORK4US
DECAL CONNECTION
EP'S CUSTOM ROD & REEL
HFF CUSTOM RODS
MUDHOLE CUSTOM TACKLE
NORTH FORK COMPOSITES
RICH FORHAN
The NERBs
THE SOUTHERN ROD BUILDERS
RODMAKER MAGAZINE
SCHLESINGER WOOD TURNING
Forum: rodboard 2 years ago
Tom Kirkman
2021 Expo Exhibitors
As of November 8 -
AMERICAN TACKLE
ANGLERS RESOURCE/FUJI
BANANA RIVER RODS
BILL BALLOU'S CUSTOM GRIPS
CHASE'S CUSTOM CREATIONS
CORK4US
DECAL CONNECTION
EP'S CUSTOM ROD & REEL
HFF CUSTOM RODS
NORTH FORK COMPOSITES
RICH FORHAN
The NERBs
THE SOUTHERN ROD BUILDERS
RODMAKER MAGAZINE
SCHLESINGER WOOD TURNING
7EVENSEAS
VISUAL
Forum: rodboard 2 years ago
Tony Vieson
66. Rod Labeling
What's a good inexpensive way to label or make notes on ur rod. I see a lot of references to decals which honestly seems a bit costly based on what I've found so far. Considering all I want to do is make a simple note on the blank to identify it as a a 7'3" M Mod-Action rod/blank. Are decals really the best for this. Are there round stencils one could use to paint then seal with epoxy. Is th
Forum: rodboard 2 years ago
Joseph Ortiz
Can you folks tell just by looking at an included factory decal what kind you are dealing with? Or do you just know from past experience with each manufacturer?
For example, I have a few new NFC blanks (which I was under the impression were the press and peel away transferable type decals), but to me they appear to be the more common peel and stick labels…
Forum: rodboard 2 years ago
Tom Kirkman
As of October 23-
AMERICAN TACKLE
ANGLERS RESOURCE/FUJI
BANANA RIVER RODS
BILL BALLOU'S CUSTOM GRIPS
CHASE'S CUSTOM CREATIONS
CORK4US
DECAL CONNECTION
EP'S CUSTOM ROD & REEL
HFF CUSTOM RODS
NORTH FORK COMPOSITES
RICH FORHAN
The NERBs
THE SOUTHERN ROD BUILDERS
RODMAKER MAGAZINE
SCHLESINGER WOOD TURNING
7EVENSEAS
VISUAL WRAP ENTERPRISES
MO
Forum: rodboard 2 years ago
Tom Kirkman
As of October 18-
AMERICAN TACKLE
ANGLERS RESOURCE/FUJI
BANANA RIVER RODS
BILL BALLOU'S CUSTOM GRIPS
CHASE'S CUSTOM CREATIONS
CORK4US
DECAL CONNECTION
EP'S CUSTOM ROD & REEL
HFF CUSTOM RODS
RICH FORHAN
The NERBs
THE SOUTHERN ROD BUILDERS
RODMAKER MAGAZINE
SCHLESINGER WOOD TURNING
7EVENSEAS
VISUAL WRAP ENTERPRISES
MORE TBA
Forum: rodboard 2 years ago
David Wilson
I am looking for best practices when it comes to applying labels straight. I order my labels from decal connection and they go on with ease and look amazing. Very frustrating to spend the time on a rod and have a crooked label. My epoxy is level and covers perfectly. My only ask is how do you ensure you have the label perfectly in line. Really hoping “eyeballing” it is not the best method beca
Forum: rodboard 2 years ago
Tom Kirkman
Exhibitors
As of September 23-
AMERICAN TACKLE
ANGLER RESOURCES/FUJI
BANANA RIVER RODS
BILL BALLOU'S CUSTOM GRIPS
CHASE'S CUSTOM CREATIONS
DECAL CONNECTION
EP'S CUSTOM ROD & REEL
HFF CUSTOM RODS
RICH FORHAN
The NERBs
RODMAKER MAGAZINE
SCHLESINGER WOOD TURNING
7EVENSEAS
VISUAL WRAP ENTERPRISES
MORE TBA
Forum: rodboard 2 years ago
Joel Babin
After researching here I purchased a Rainshadow Revelation 6wt 10ft 2 piece to build a vertical jigging rod. I wrapped the guides up last night and also wrapped the last 2.5 inches of the blank up to the tip top in fluorescent yellow (as a visual indicator). Is there any issue with wrapping that much of the rod tip?
Forum: rodboard 2 years ago
Tom Kirkman
As of September 1st:
EXHIBITORS:
AMERICAN TACKLE
BANANA RIVER RODS
BILL BALLOU'S CUSTOM GRIPS
CHASE'S CUSTOM CREATIONS
DECAL CONNECTION
EP'S CUSTOM ROD & REEL
HFF CUSTOM RODS
RICH FORHAN
The NERBs
RODMAKER MAGAZINE
SCHLESINGER WOOD TURNING
7EVENSEAS
VISUAL WRAP ENTERPRISES
MORE TBA
Forum: rodboard 2 years ago
Tom Kirkman
74. Expo Exhibitors
Still very, very early, but as of August 26th-
2022 ICRBE Exhibitors
AMERICAN TACKLE
BANANA RIVER RODS
BILL BALLOU'S CUSTOM GRIPS
CHASE'S CUSTOM CREATIONS
DECAL CONNECTION
EP'S CUSTOM ROD & REEL
The NERBs
RICH FORHAN
RODMAKER MAGAZINE
SCHLESINGER WOOD TURNING
7EVENSEAS
VISUAL WRAP ENTERPRISES
MORE TBA
Forum: rodboard 2 years ago
Tom Kirkman
The first round of exhibitor contracts went out last week. Obviously this remains very, very early in the process but I want to go ahead and list the first group of exhibitors to get on board:
As of August 19-
AMERICAN TACKLE
DECAL CONNECTION
EP'S CUSTOM ROD & REEL
RODMAKER MAGAZINE
SCHLESINGER WOOD TURNING
MORE TBA
.................
Forum: rodboard 2 years ago
Lee Bossley
76. decal
I want to move a decal on rod that I'am working o The handle is going to cover it so I would like to move it. I didn't know if or how to do so were I could still use it.
Thanks Lee
Forum: rodboard 2 years ago
Rick Shaffer
77. Decal Issue
I have a customer who would like a HS Mascot sticker on their rod I built.....problem is the sticker the customer supplied is not vinyl or plastic, it has some paper qualities to it and the edges of the customer's decal wants to curl up after the Pro Kote finish goes over it. Any suggestions ??? Super glue?, forget about it?, try to have one made out of vinyl or plastic?? Thanks in advance for
Forum: rodboard 2 years ago
Gary Michael
I have been putting decals on for years and have only had problems with one rod company's decals . His decals seem to partially float up thru the finish. I complained and they now send 2 decals with all blanks, which have to be on the rod for warranty work. I have cleaned the blank with rubbing alcohol, with a coat of dry flex coat applied first , apply decal, heat 10-15 seconds with heated hair
Forum: rodboard 3 years ago
Scott Dacey
As mentioned above, I have a customer who wants me to build a rod for her husband for fathers day. He's an Atlanta Falcons fan. I have seen sports decals somewhere but for the life of me can't find them. i've tried all the usual suspects, Mud hole, Get bit, Decal connection and even a new site called Custom Rod Components (CRC). If someone could point me in the right direction I would greatly app
Forum: rodboard 3 years ago
roger wilson
Over time I have built a lot of rain shadow blanks and especially in recent years have been well pleased with the performance.
It had been a while since I last built on one of their fine blanks but now it was time to build a couple.
I noticed that the decal that came with the blank was different than the ones that I used on the last blank that I built. It has been a while.
Just for a
Forum: rodboard 3 years ago
Ernie Blum
I just saw something interesting by accident regarding the application of decals. The gentleman doing the video mentioned that the blank he was about to apply the decal to was an NFC blank. He mentioned the fact that these blanks are ribbed, and that you cannot successfully apply decals to these blanks "as is" (my words) because of this. He suggested that one needs to apply a thin co
Forum: rodboard 3 years ago
Ken Brown 2
82. Joker decals?
I have a prospective client who is looking for a Joker themed rod. He sent me a pic of a rod that has a Joker decal on it. It looks like a Rod Skinz thing but I dont see anything like that at Mudhole. Ideas?
Forum: rodboard 3 years ago
David Luttig
83. Toy decal
I have a guy who wants a decal of a particular excavator. I found some toy decals of the machine he wants. Is there any reason not to use one of these decals as long as a good topcoat finish is applied?
Thanks!
Dave
Forum: rodboard 3 years ago
Guy Daines
84. Custom Decals?
I was originally looking at buying custom decals of a custom logo off of MudHole until I realized they charge an extra $30 fee for first purchase AND require a minimum order of 30 decals on first purchase as well, which would all end up coming out to almost $300 that I’m really not trying to spend. Anyone know a different website that I can buy good rod decals from with a custom logo that doesn’t
Forum: rodboard 3 years ago
Ken Brown 2
85. LW-PX400 printer
I have seen many people post regarding the LW-PX400 printer for labels. From what I have seen, its a really good one for labels. I attempted to use the p-touch label maker but the tapes were stiff and tough to use. Are the tapes for the LW-PX400 less stiff than the p-touch labels? I have also read that the printer comes with software which allows you to print more than just words. Anyone pri
Forum: rodboard 3 years ago
Jay Burns
Have read in the past that some guys have used Waterslide Nail Art Decals for sports themed custom builds. I am a bit skeptical of using them, as I have read from some they will fade in the sun over time. Last thing I want to do is build a beautiful rod with decals that have basically been erased by UV. I know I can contact Decal Connection have them do a variation but not the logo itself. Was
Forum: rodboard 3 years ago
Todd Andrizzi
87. rod decals
I am pretty sure this information has been on here in the past...just don't know how to find it. Where is the best place to get decals for rod specs. I have a blank that didn't come with that specs sticker and I am no good at all at writing on the blank. Thanks!
Forum: rodboard 3 years ago
Jim Alberts
88. India ink
If you use India ink to add a signature to a graphite rod blank do you have to give it a light coat of guide wrap or is it waterproof?
Forum: rodboard 3 years ago
Denham Bruce
Anyone know where I can get a custom decal for a blank I'm working on? Its a Harley Davidson themed rod so I wanted to put a Harley logo on there. The folks at DecalConnection wouldn't print it due to trademark issues which is fine but that won't stop me from having this rod turn out the way I originally had planned. If anyone has a contact and could help me out that would be greatly appreciated!
Forum: rodboard 3 years ago
Tom Kirkman
90. Expo Exhibitors
As of DECEMBER 8-
ALL AROUND FISHING
AMERICAN TACKLE
ANGLERS RESOURCE/FUJI
BATSON RAINSHADOW/ALPS
CORK4US
DECAL CONNECTION
DREAMWEAVER
EP CUSTOM RODS
MICKEL'S CUSTOM RODS
NORTH FORK COMPOSITES
RODMAKER MAGAZINE
7EVENSEAS
SEATECH
TRONDAK U40
MORE TBA
Forum: rodboard |