SPONSORS
2024 ICRBE EXPO |
Results 61 - 90 of 500
17 years ago
sam fox
62. new rod shop
finally got it up and running after the move from Mississippi to Iowa. This is the wrapping and finishing bench
Forum: rodboard 17 years ago
sam fox
Thanks Mark Blabaum. This is another view of the Maple and Walnut split grip.
Forum: rodboard 17 years ago
sam fox
First attempt, Thanks Mark. Maple and Walnut with a Walnut insert.
Forum: rodboard 17 years ago
sam fox
This is a view of the butt cap, he lost his wife a couple of years ago and had me inlay one of her large dangling earrings in it.
Forum: rodboard 17 years ago
sam fox
I built this rod for a friend, it has a buckeye burl handle,split grip,spiral wrap,chevron butt wrap and marbled reel seat
Forum: rodboard 18 years ago
sam fox
7 1/2 ft flipping stick using texalium and red cedar for spit grip
Forum: rodboard 18 years ago
sam fox
73. 9 wt fly rod
9 wt Austin blank, handle is a combination walnut, burnt cork, burl cork and kraft foam. Reel seat is Pac Bay.
Forum: rodboard 18 years ago
sam fox
74. 6 1/2 ft. 2 wt.
burnt cork handle, red cedar insert and sliding ring reel seat
Forum: rodboard 18 years ago
sam fox
4 wt rod with a nylon cord wrapped handle and a walnut burl insert, finished with spar varnish
Forum: rodboard 18 years ago
sam fox
Rear of handle on wife's rod using her oil paints from her painting set. This was the first rod made from Andy Dear's blanks from the show.
Forum: rodboard 18 years ago
sam fox
Made this for my wife from one of the blanks purchased from Andy Dear at the show.
Forum: rodboard 18 years ago
sam fox
79. Wife's Rod
Made for wife from one of Andy Dear's blanks purchased in Charlotte.
Forum: rodboard 18 years ago
sam fox
Made this to go with the rod case that I posted earlier. Took a little time to do this.
Forum: rodboard 17 years ago
sam fox
81. pack rod
5 piece pack rod with 2 handles, makes into a 6 wt 9 ft fly rod or a 7 1/2 ft light spinning rod
Forum: rodboard 18 years ago
sam fox
Made this to transport 2 of my flyrods in, hand stitched and tooled.
Forum: rodboard 18 years ago
sam fox
86. spin rod/combo
bamboo fly/spin combo shown in the spin configuration. Good for a 2-10 lb line or a 1/8 oz to 1/2 oz lure.
Forum: rodboard 18 years ago
sam fox
87. fly rod/combo
bamboo fly/spin rod shown in fly configuration. It throws a 4 wt line.
Forum: rodboard 18 years ago
sam fox
gaff made from a wood dowel rod, wrapped with nylon cord and turned with marine fiberglass resin. Marbling added as whim in red, white and blue
Forum: rodboard 18 years ago
sam fox
Wood is a combination of maple,walnut and red cedar. Reel seat is from a junked daiwa buggy whip rod and rod is from a broken used rod.
Forum: rodboard |