SPONSORS
2024 ICRBE EXPO |
Results 181 - 210 of 1684
2 years ago
Robert A. Guist
Hello All.
I doubt that Tom would ever leave rodbuilder.org to someone he even thought would mess it up.
Tight Wraps & Tighter Lines.
Forum: rodboard 2 years ago
Robert A. Guist
182. Re: Thank you all!
Hello Aaron.
Looks Good, nice job.
Tight Wraps & Tighter Lines.
Forum: rodboard 2 years ago
Robert A. Guist
183. Re: AllStar blank
Hello All.
I just dug-out my two blanks and they are plainly labeled:
AllStar IGSH1322-2
I have just re--measured them and I admit they are not exactly 5.0 they are more like 4.75 and the butt is .490 on both also.
I'm pretty sure I bought them from MudHole at one of the ICRBE's.
I will check my records and see if I still have the receipt.
P.S. I checked my records, and yes I got
Forum: rodboard 2 years ago
Robert A. Guist
184. Re: AllStar blank
Hello Sammy.
I don't have all the specs but here is what I have.
I think I have 2 of them
INV#------ MFR--------------- Model ----------Lgth---------- Line--------Lure Weight----Butt -------Tip--- Action----Power-----Blk Wt
37 -------ALL STAR----- IGSH1322-2---9' 11-5/8" ------- N/L-------------N/L----------0.490------5.0-----N/L--------N/L----------N/L
INFO - # 2 PC.---------
Forum: rodboard 2 years ago
Robert A. Guist
Hello Jeff.
Thats the way I do it, but I usually don't do two piece rods only if specially ordered.
Tight Wraps & Tighter Lines.
Forum: rodboard 2 years ago
Robert A. Guist
Hello Zachary.
If your "O" Ring is to big you can use one of those little rubber winding checks under your metal check, it works good too.
Tight Wraps & Tighter Lines.
Forum: rodboard 2 years ago
Robert A. Guist
187. Re: Rod info
Hello Tom.
This is the only one I found with a quick search:
Vol/Issue -------------------------------- Article ---------------------------------------------------Author ------------Page.
10/1 Sensitivity (What is it? What makes one rod more sensitive than another?). By Emory Harry. 28
6/6 Blanks: Characteristics, Properties and Terms, Part 1. By Emory Harry, And Jack Hurt. 28
7/1
Forum: rodboard 2 years ago
Robert A. Guist
188. Re: Rod info
Hello Bob.
The numbers you are referring to are part of the CCS system, to learn more about it, under the Sponsors list to the left<- read Common Cents Info.
Tight Wraps & Tighter Lines.
Forum: rodboard 2 years ago
Robert A. Guist
189. Re: Leather Grips
Hello Michael.
These are all the articles I could find on leather grips.
Vol / Issue------Article-------Author----------------Page.
15/5 Grips, Leather Wrapped. By Mike Ballard & Tom Kirkman. 14
20/5 Handles Made from Synthetic Leather. By Nuno Paulino. 14
14/5 Handles & Grips, Stacked Leather. By Larry and Raymond Adams. 16
14/6 Handles & Grips, Stacked Leather.
Forum: rodboard 2 years ago
Robert A. Guist
Hello Don.
When are you guy's setting up for the ICRBE Thursday or Friday?
I should be there Friday Ill see you there.
Tight Wraps & Tighter Lines.
Forum: rodboard 2 years ago
Robert A. Guist
191. Re: Hypalon lifespan
Hello Adam.
Tom is right just go to the search and type "Crusty Hypalon" and change time to "all dates" Col has a few that may work.
Tight Wraps & Tighter Lines.
Forum: rodboard 2 years ago
Robert A. Guist
Thanks Michael.
I usually only spend 1 day reading the issue and ½ a day inputting it into my list.
I feel I need to understand what the articles are about before inputting them because I put them in several ways.
Tight Wraps & Tighter Lines.
Forum: rodboard 2 years ago
Robert A. Guist
Hello Mike.
There is a 2 lists; of sorts for vol-1 thru 7 in the ^"LIBRARY"^ at the top of the page.
But I know of no lists covering the majority of issues other than the one I have made up for finding articles easier than going through each & every magazine looking for a specific article.
Tight Wraps & Tighter Lines.
Forum: rodboard 2 years ago
Robert A. Guist
194. Re: End of an era?
Hello Travis.
"THIS IS WHAT MADE IT SPECIAL"
"THIS IS WHAT MAkES IT SPECIAL"
Tight Wraps & Tighter Lines.
Forum: rodboard 2 years ago
Robert A. Guist
Hello Victor.
You are Welcome, keep building.
Tight Wraps & Tighter Lines.
Forum: rodboard 2 years ago
Robert A. Guist
Hello Victor.
The link Norman gave you is a good one but if you still want to read the articles, these are what I have on templates.
Vol / Issue - Article - Author if listed - ,Page
9/2 Grip Template: Pier / Boat / Trolling Rod Grip. 31
8/5 Grip Templates: 1:1 Round Half-Ball Butt End. 16
9/3 Grip Templates: A Simple Casting Rod Pistol Grip. 28
8/3 Gr
Forum: rodboard 2 years ago
Robert A. Guist
Hello Jim.
vol / issue Article Author Page
7/1 Build: Surf Rods A Guide to Building Them. By Tom Kirkman, Mike Ballard, Neil Faulkner & Ken Preston. 22
18/3 Build: Surf Rods A Guide to Building Them. By Tom Kirkman, Mike Ballard, Neil Fau
Forum: rodboard 2 years ago
Robert A. Guist
198. Re: rod history
Lance.
Still do!!
Tight Wraps & Tighter Lines.
Forum: rodboard 2 years ago
Robert A. Guist
Phil.
Yea or send to one!!
Give Em heck Mark.
Tight Wraps &Tighter Lines.
Forum: rodboard 2 years ago
Robert A. Guist
200. Re: Bubble buster
Hello Roman.
I did a search using "All Dates" and this came up as the 39th thread.
39. Re: Bubble buster
I can't find the SDS sheet for the Bubble buster but I found on another fourm where someone said the MSDS says methanol and proprietary additive. The product is listed as flammable so I am suprised Mudhole doesn't have a SDS listed for the product on there website. MSDS has no
Forum: rodboard 2 years ago
Robert A. Guist
201. Re: ICRBE
Hello Fred.
No problem.
Keep building.
Tight Wraps & Tighter Lines.
Forum: rodboard 2 years ago
Robert A. Guist
202. Re: ICRBE
Hello Fred.
Just go to the RodMaker Blog page <-.
Tight Wraps & Tighter Lines.
Forum: rodboard 2 years ago
Robert A. Guist
Hello Jeff.
Welcome and enjoy.
Tight Wraps & Tighter Lines.
Forum: rodboard 2 years ago
Robert A. Guist
204. Re: Adhering Tip
Hi All.
I use a high temp hot melt glue, Iuse a high temp gun and lay down a bead of the hot glue let it cool then cut it into about 6" strips.
I then take the top with the open end up, place the strip into the top and cut the glue a little above the top, then melt by gently heating the top till the glue melts, then put the top on the rod.
Works good & lasts a long time.
Ti
Forum: rodboard 2 years ago
Robert A. Guist
Hello Chris.
Here is the location of the article Tom spoke of.in RodMaker Magazine.
Vol/Issue________Article________________Author__________Page
14/4 Alignment Marking Tool, Multi-Piece. By Tom Kirkman. 22
Tight Wraps & Tighter Lines.
Forum: rodboard 2 years ago
Robert A. Guist
206. Re: New Issue
Congrats Tom & many more.
Tight Wraps & Tighter Lines.
Forum: rodboard 2 years ago
Robert A. Guist
Hello Sebastian.
Here are some articles on heavy rods in RodMaker Magazine, but unless you have an extensive collection of RodMaker...
Vol/Issue--------------Article-----------------------------Author------------------------------------------------------------------Page
21/3 Stand-Up Rods, Complete Guide To Building. By Tom Kirkman, Mike Ballard, Ian Miller, & Tom Kohl. 22
15/3 Rol
Forum: rodboard 2 years ago
Robert A. Guist
Hello Sebastian.
What kind of fishing are you going to be doing most billfish, tuna, shark, or other?
For any of them I use either S-Glass or Composite, but E-Glass would be OK, I would Not use graphite for anything that big (I don't trust the brittleness).
I also would prefer the swivel if fishing that big from the gunnel (When I fished for the big boy's I mostly used a chair).
Most
Forum: rodboard 2 years ago
Robert A. Guist
Hello Sebastian.
Are you trolling in a chair, trolling from the gunnel, or are stand-up fishing?
Most who have a swivel top are trolling.
The IGFA was invented to have a "Class" of rods for tournaments and records, it didn't completely take in the tournaments section.
If you are going to be in a chair you usually need a longer rod than gunnel or stand-up.
P.S. IGFA= Inter
Forum: rodboard 2 years ago
Robert A. Guist
Hello All.
This is all I have on Ferrules:
Vol/Issue________Article__________________Author_________Page
6/1 Ferrule Alignment Mark Methods. By Tom Kirkman. 10
13/1 Ferrule Fitting & Restoring. By Tom Kirkman. 22
5/3 Ferrule Lapping. By Bernard Elser. 22
4/4 Ferrule Making. By Ralph O'Quinn. 22
2/1 Ferrule Mounting on Your Unibutt. 24
5/2 Ferrule Plugs. By Russ G
Forum: rodboard |