SPONSORS
2024 ICRBE EXPO |
Results 91 - 120 of 1319
10 years ago
Barry Thomas Sr
94. P1000555
Leveling tool is Same Height as Center of Chuck on my Clemens Lathe
Forum: rodboard 9 years ago
Barry Thomas Sr
96. Blk Drumfish
<p>This was Caught in the Surf on a the Second Cast with a Rod I had just Finished 49" &nbsp;60# Black Drum fish</p>
Forum: rodboard 5 years ago
Barry Thomas Sr
Trying to post a item for sale.And have run afoul of this I AM NOT ROBOT LINK After 10 tries at getting this right, There has to be a problem with it. Its not rocket science it keeps telling me i have it wrong!
ANY IDEAS??
Forum: rodboard 5 years ago
Barry Thomas Sr
101. Re: Beach Rod Blanks
Batson Rainshadow and RodGeeks are my Go To Blanks
Forum: rodboard 5 years ago
Barry Thomas Sr
102. Re: Grip Poll
Being that I mostly build Surf rods I use a Lot of Cork Tape and Shrink wrap, easy to maimtain and replace if need be.
Forum: rodboard 6 years ago
Barry Thomas Sr
Almost all the Surfrods I build are wrapped with Cork Tape and Covered with Shrink wrap, You can get 1/16" and 1/8" Cork tape and add a Shrink wrap Covering. Cork tape can be Double wrapped if you need more thickness (going in Alternate Directions when wrapping. You can wrap it that way for the butt section and add a Cork or EVA fore grip, or NO foregrip at all just close off the Ree
Forum: rodboard 6 years ago
Barry Thomas Sr
Dennis Danku Thank You! For your Information Drop!
Thank You to all those who Responded, I really Appreciate the the way the Folks here go out of thier way to help others
Forum: rodboard 6 years ago
Barry Thomas Sr
Roger and Robert Thank You for your help!
Already Posted on Batson Forum, And sent a Email to Utmost they have been my go to batson Dealer
Forum: rodboard 6 years ago
Barry Thomas Sr
I have these two Styles here in Jersey, I think I can get one there cheaper than 10.00
Sorry for that photo? thats how it posted
Forum: rodboard 6 years ago
Barry Thomas Sr
I have these two Styles here in Jersey, I think I can get one there cheaper than 10.00
Forum: rodboard 6 years ago
Barry Thomas Sr
108. information Request
A fellow asked me to Build him a Surf Rod 10-11 ft rated around 5 OZ for Striper fishing here in NJ. Well got looking around and found a PVC tube containing two Batson Rainshadow SU1267-F 10' 6 ' Rated to 6 OZ. Problem is i Cannot find the Pricing info on the Blank! They no longer make Them and I do not have a Catalog That carries the info.
Any help would Be greatly Appreciated
Forum: rodboard 6 years ago
Barry Thomas Sr
Chuck can be made fron a PVC end cap and a couple thumb screws. Try Grainger or FLexcoat for Pulleys
Forum: rodboard 6 years ago
Barry Thomas Sr
Chuck can be made fron a PVC end cap and a couple thumb screws. Try Grainger or FLexcoat for Pulleys
Forum: rodboard 6 years ago
Barry Thomas Sr
Chuck can be made fron a PVC end cap and a couple thumb screws. Try Grainger or FLexcoat for Pulleys
Forum: rodboard 6 years ago
Barry Thomas Sr
Chuck can be made fron a PVC end cap and a couple thumb screws. Try Grainger or FLexcoat for Pulleys
Forum: rodboard 6 years ago
Barry Thomas Sr
Been using large bobbins since "91" when I first started,built my own rod lathe out of Alum. but could never get a carrage to work. Now I have a Clemens and my thread Carage is in a Drawer. Still use bobbins
Forum: rodboard 6 years ago
Barry Thomas Sr
DO NOT USE CARDBOARD TUBES! Long Story! Cost ME $300.00 P.O.gave me $50
Forum: rodboard 6 years ago
Barry Thomas Sr
I made and use this, bolt is 2 1/2 or 3 inches Reel base plate is Drilled and tapped to match bolt thread and locked with epoxy and nut
makes it easy to align guides to match seat
Forum: rodboard 6 years ago
Barry Thomas Sr
120. Re: Surf rod build
I use Double Foot Guides, Mostly Fuji "K" Guides. The are light and Strong to Stand up to the Abuse of fishing the Surf. I do not think there is a Style of fishing that put more abuse on a rod then surf fishing SAND,WAVES ,ROCKS, Fishing on jetties.
You can start out with a Double and go to singles if you like. Most of the Surfrods i build are used for throwing Bait here in Sout
Forum: rodboard |