SPONSORS
2024 ICRBE EXPO |
Results 121 - 150 of 609
14 years ago
Dave Orr
121. Re: fly steelhead?
I also use a Batson RX7 for steelhead. It is a no longer produced 10 1/2' 7wt.
Forum: rodboard 14 years ago
Dave Orr
Kirk_Miller Wrote:
-------------------------------------------------------
> Snakes are one of th reasons I like living in
> Alaska.........There are none here.......lol
None in the NWT either. :)
What kind of snake was it?
Forum: rodboard 14 years ago
Dave Orr
Thanks guys.
I'll test wrap a bunch of thos suggestions and see how it looks. :)
Forum: rodboard 14 years ago
Dave Orr
Just wondering what thread colour y'all would suggest. I'm putting together a 7136-4 spey conversion using Fuji Titanium Sic's and Struble Nickel Silver skeleton seat with a sweet piece of blue died Big Leaf Maple burl. Should I go with the factory colour? Something closer to the wood? What you guys think?
What is the factory colour?
Thanks for the help. :)
Forum: rodboard 14 years ago
Dave Orr
Schedule 40 PVC pipe with end caps.
Leave room for an inch of foam in each end cap.
Fill in extra space with bubble wrap.
Pretty much bullet proof!!! :)
Forum: rodboard 14 years ago
Dave Orr
Thanks for the info Herb.
Money is not an issue on this build.
I'm putting together a Sage Z-Axis 7136-4 Spey conversion and have some spendy cork, struble reel seat hardware and Fugi TYSG titanium sic's for it.
I have nearly $300 in components already so a few more $$$$ won't kill me. :)
Forum: rodboard 14 years ago
Dave Orr
I'm looking for some stabilized jade wood in 1 1/4" to 1 1/2" square.
Any body know where I can find some?
I remember talk of a suplier of stabilized woods on here but am having trouble finding it using the search feature.
Thanks in advance for your assistance.
I found reelseatblanks.com but they don't seem to have what I'm looking for.
Forum: rodboard 14 years ago
Dave Orr
129. Re: float rod guides
Yep, same as Rolly here.
I like Batson XY series or Fugi LVSG's or if you have an unlimited budget TYSG's. :)
I use #7's on out to the tip as I don't like how the #8's change the action of the blank.
Forum: rodboard 14 years ago
Dave Orr
Troutfitters in Fergus is now carrying rod building supplies also.
Forum: rodboard 14 years ago
Dave Orr
Sweet!!!!
So I can most likely expect one with the order I placed last night. :)
Forum: rodboard 14 years ago
Dave Orr
I'll bet the major factor in tip breakage on bass rods is highsticking though.
I cringe everytime I see one of those "bass pros" swing a fish on board or grab the blank 2 feet down from the tip to man handle the illusive bass onto their boat.
Forum: rodboard 14 years ago
Dave Orr
Good work Ian.
It will be nice to have it again.
Will you be able to get back issues as well?
Forum: rodboard 14 years ago
Dave Orr
Bill
When are you guy's going to make a 15' XST float rod. ;)
I need one to go with my 13 footer.
Forum: rodboard 14 years ago
Dave Orr
The XST's are excellent blanks. I built one of the 3pce blanks to take to Alaska this year and it performed flawlessly.
The 2 pce is a bit of a pain to transport but it is lighter in the hand.
I'll get to play with one my buddy has next week. :)
I run my guides like Eric above ^^^
Forum: rodboard 14 years ago
Dave Orr
Excellent!!!!
Nice to see Custom Tackle step up to the plate!!!!
Two thumbs up!!!
Forum: rodboard 14 years ago
Dave Orr
139. Re: too much heat?
If you are using heat hold use your free hand to hold the rod in the area you are heating.
If it's too hot to hold it's too hot for the blank.
Forum: rodboard 14 years ago
Dave Orr
140. Re: balance kits
Bass Pro has a good one.
Cabelas has one too.
Forum: rodboard 14 years ago
Dave Orr
141. Re: Ice rod blanks
I used Batson solid glass saltwater blanks cut down to make 2 rods.
I was able to get a MH and a H rod by changing how the blank was cut down.
.385"x.105"x72" Black / White 6'0" 1 12-20 LB 0.385 7.0 Moderate n/a $10.22
Forum: rodboard 14 years ago
Dave Orr
Preston
Here's a couple I built last year.
The lighter rod has a #8 tip and the heavy rod has a #10.
I also agree with using solid banks for durability. These two rods are bomb proof.
I use a lot of braid on my setups due to fishing deep water almost exclusively.
While I have had the line stick to the ice a few times I haven't experienced the icing on the reel that Roger has.
It probably ha
Forum: rodboard 14 years ago
Dave Orr
143. Re: New Releases
Paul
Gary and J.C. are working on it. :)
Forum: rodboard 14 years ago
Dave Orr
How about building 3pce 13 and 15 foot steelhead blanks for us Northern guys?
4-8# and 6-10# versions.
PLLLEEEEEEEEEEEEEEEEEEEEEEEESE. :)
Forum: rodboard 14 years ago
Dave Orr
It's too bad it wasn't a week earlier as I could have planned to attend on my way through the area returing from my vacation on the KP.
Forum: rodboard 14 years ago
Dave Orr
Too bad it wasn't last weekend, that way I could have popped in on my way back home from vacation.
Good luck with the gathering!!!!
Forum: rodboard 14 years ago
Dave Orr
I have some on a Raven float rod at home and will measure my #20 stripper when I finish work in a couple of hours.
Forum: rodboard |