SPONSORS
2024 ICRBE EXPO |
Results 91 - 106 of 106
17 years ago
Dale Cecil
91. Blank help
Need help with a 2 piece 7 foot blank, 10 to 14 pound test spinning for permit and bone fish. Any recomendations.
Forum: rodboard 17 years ago
Dale Cecil
I like mine to stop at the end of my elbow I feel anything past that is a waist. Thats just the way I like my flipping stick and that is differant for everyone.
Forum: rodboard 17 years ago
Dale Cecil
If you live close to a base sometimes they have them in there gift sections or if you know anyone in the service or retired as I am. I will look the next time i'm at the base.
Dale
Forum: rodboard 17 years ago
Dale Cecil
Michael,
I would like to know how you do these two wraps if you wouldn't mind explaining it.
Thanks Dale
Forum: rodboard 17 years ago
Dale Cecil
I would like to know the brand and were to purchase the purple pigment thats posted on the photo board.
Forum: rodboard 17 years ago
Dale Cecil
I just received my color samples and would like to know if anyone has used any of the super twist colors? No.30, Multi-color, opal-color, or crystal-color and what were the results?
Forum: rodboard 17 years ago
Dale Cecil
Thank you all for the help and I think my e-mail address is now unlocked what a great group op people here!
Forum: rodboard 17 years ago
Dale Cecil
Just bought a used Renzetti and ordered new washers and springs for the thread carrier. Not sure the order they go in and want to know if anyone can help? There are 2 tapered brass washers, 2 plastic, 2 flat brass,1 slotted brass, and a spring for each arm. I wrote Renzetti but got no reply. I realy want to try out the best of the best this weekend. Any help would be greatly appriciated.
Forum: rodboard 17 years ago
Dale Cecil
100. Robison-Anton Rayon
Has anyone used any of this thread? Will it work for rod building and if so what type of C.P. would be best?
Forum: rodboard 17 years ago
Dale Cecil
101. Mini Lathes
I have a two part question on mini lathes. I found three brands and want any recomendations on Jett,Rikon and Delta. Part two where is a good place to buy wood for turning rod handles?
Forum: rodboard 17 years ago
Dale Cecil
I have had this happen two to three years ago when I was first using U 40. Talked to someone who talked to Ralph OQuinn never got a clear response to what caused it. I have never nor would I ever added anything to any finish I was going to use. I used an alcohol lamp on flex coat for bubbles, and nothing when I used U40 and got cracks in both. I don't want to keep going on on this but final
Forum: rodboard 17 years ago
Dale Cecil
I have had the same thing happen. The first time I was told it was tension to tight, But then I was told it was I did my cutoff to straight to stager it and comb the thread out prior to over wrapping.I have not had it happen since I did the uneven trim and combing of the thread and have left it in extream heat for a week. The car with the windows up in Florida.
Forum: rodboard 17 years ago
Dale Cecil
TOM! Sure hope I can make it this year really looking forward to it. Just an idea but if you have audio visual equip. and the professionals holding the seminars are in agreement why not record them put together a DVD and sell them and use the money where needed I.E. coat room or anything else you may need. Just thinking and I already know how genorus everyone is that has anything to do with t
Forum: rodboard 17 years ago
Dale Cecil
105. Cracked Epoxy 2
Has knowone else but Scott and I had this problem? A picture of the crack is on the photo page. I also have noticed that if you leave the finished rod in a high heat area i.e. in the car for delivery. It will hapen much sooner. I really would like to know what I am doing wrong that would cause this. It has happened around six times to me. If is really is thread tention why has it never happ
Forum: rodboard 17 years ago
Dale Cecil
106. Cracked Epoxy
I have had the same crack in epoxy that Scott Gadsby has. I was told my wrap tention was to tight I don't believe this since I use the same tention on my guides. I was also told it was how I cut the wraps to blunt and sraight. I do tend to believe this more can anyone else help. I was told to cut the end of the wrap more unenenly and to comb it out like Doc Ski does on his vidio.
Forum: rodboard |