And if you want something a little faster, look at SB841. Here is a link;
Forum: rodboard

I just want to mention that when you are talking about very light line, a softer, more moderate action will help protect that line if fighting a large fish. Some years ago we built some 10' "noodle" rods for a local fisherman who was bent on breaking the 2" record for Striper Bass. We both learned a lot about what works under those extreme conditions. Lots of guides, "t
Forum: rodboard

If you find yourself short on winding checks or butt caps, consider the hardware store. There are sections that have specialty washers for instance. Or chair tips for buttt caps. Not as economical maybe as the real thing, but could work in a pinch. You may even find something that works better for you.
Forum: rodboard

XST1141-F rating is "Mod'fast"
Forum: rodboard

We have one left of the now discontinued Batson XST1141-F. It will be faster than either the DSS or IST series, with a tad more backbone. Price is now $ 95.00, here is a link;
Forum: rodboard

At this time we use Batson Alps tops, which match the MicroWave sets very nicely. Here is a link; For the Airwave, we stock Amtak tops in Blk/Silver, link:
Forum: rodboard

If you want something to toss those light 1/8 oz. or lighter lures, with a softer, more moderate action, a 2 or 3 weight fly blank is what I would use. If you like a more moderate action, it will be fun. If you want something a little faster with more backbone, than something in a 7' UL spin blank. Here is a link to Batson "Immortal" series; There are similar choices in low
Forum: rodboard

If you want a rod that is better at being a fly rod and fair as a spin, use a fly blank, but something in the 4-6 wt range. If you want a better long light spin rod, consider a 1 or 2 power Steelhead blank. We have done both, the fly blank gives a nice moderate action, but the cast is more of a"lob". As Roger points out, if you like something a little more "snappy" in perfo
Forum: rodboard

We show a 9' 4 wt, 5 wt and 8 wt in stock today. Also have one left of the 10' 5 wt.
Forum: rodboard

Some that have been popular are the one-piece Batson Forecast in 6-61/2' "SPG720 & SPG780. Here is a link;
Forum: rodboard

I think Tom was saying a wrap just in the space between guide feet on any 2 foot guide. That way you get the look without adding unnecessary weight. If that makes your custom rod special to you, do it. Just remember that you are adding a tad more weight and yes, it will slow down the action slightly. Some things we have done is White in the space between guide feet, Red guide wraps on a Blue
Forum: rodboard

Here is a link to our web site and the "Forecast" line of rod blanks. The Fiberglass blanks are a sturdy and dependable choice at great prices. We can supply a whole "kit" if you want, just ask.
Forum: rodboard

You might want even shorter then. The "SB" line are fast action, and have 3 pc blanks available. Here is a link; We also have one left of the SB845-3CG, 3/8-1 1/4 oz, 12-25#, 3 piece @ $ 60.00. I thought you were looking for longer blanks at first. I believe you are on the right track, shorter and lighter rod weight is better for all day jigging.
Forum: rodboard

We have the earlier HS1025F which is now discontinued. They are Matte Charcoal finish. Lure/line 3/8-1 oz, 12-25# line. Were 107.80, now $ 30.00 off, sell $ 76.00. The HS1023F is still available. We have a couple of the earlier models, same finish. Lure/line 1/4-3/4 oz., 10-20# line. Were $124.99, sell 4 89.95. New models are $ 164.15 MSRP
Forum: rodboard

What works for us is a candle upright held in the neck of a bottle That leaves both hands free and elevates it up off the workplace for more freedom of movement.
Forum: rodboard

Just posted, a limited supply of Pac Bay fly blanks. Here is a link;
Forum: rodboard

Sounds like some kind of contamination. Perhaps left on the blank from use, or maybe in the mixing container? I have had similar problems on repairs of well used rods, the cure was to wipe down any area I was coating with Lacquer Thinner.
Forum: rodboard

You may want a larger butt guide, and/or higher frame. I would use 2 foot for the first 4 guides, butt and next 3 up, turning in 2 guides. Tape them all on and then mount the reel, run line thru, and put a load to the rod. The blank will bend almost to the handle under load, so you need the butt guide high enough to help keep line off the front grip (or hand). We like 2 ft. sz 16 butt, go
Forum: rodboard

Just added some Batson blanks and new prices on many of the remaining Rx-7. Also, special prices on a couple of current RX-6 "SB" Overstock blanks. More items to come soon, fly and spin reel seats also. Here is a link to our "Hot Specials";
Forum: rodboard

Occasionally you will get one that someone else worked on and replaced using 2 part epoxy. Unless it is "Quick-Cure", you may not be able to break the bond without damaging the blank. The only thing left is either cutting off that end of the blank, or trying the Dremel tool trick as John says.
Forum: rodboard

And don't forget the trick of wetting the wrap with Alcohol to mimic what it will look like with finish on it.
Forum: rodboard

I agree with herb. It is a lot easier to correct any mistake on reaming if you are dealing with just one bushing at a time.
Forum: rodboard

You might try a tapered reamer to enlarge the 1/2" opening.
Forum: rodboard

Just posted lower and updated prices on Batson Forecast Gloss Dark Blue Fly Rod Blanks, also some reel seat bundles. More coming soon! Our "Hot Specials" page;
Forum: rodboard

A Batson Forecast 6' SPG721, or 5' SPG601 fibreglass works well for a stream rod. Roughly 1/16 of an ounce lure weight = 1 wt of fly line. Here is a link;
Forum: rodboard

What line weight are you looking for? As Mick says, a spin blank can sometimes work very well for a "fast" fly blank. Roughly a 16th of an once in spin lure is about a 1 weight in fly line. 3/16 lure = 3/4 wt fly A 5/6 wt fly blank makes a nice soft action 1/8-3/8 oz lure spin blank. We made those up years ago for Nightcrawler fishing, unweighted. There was a book called "Lun
Forum: rodboard

Staring today, July 3rd, and for an entire week ending on Wednesday, July 10. 10% off Everything on our web site, no minimums. That includes items already on sale at our "Hot Specials" page. As an extra bonus, orders of COMPONENTS or Finish that total over $ 50.00 after discounts will SHIP FREE! Add rod blanks and ship them for just $ 6.00 more, any quantity. Use Code "FREE19&
Forum: rodboard

We like size 6 runners, and use size "D" or "E" wrapping thread to make our own stops. I found the mono too stiff for a stop, the edges always seem to catch. Using soft thread goes off the reel and thru the guides well, and a slightly longer tag end seems better. What that does is make a "cushion" that slides easier than a sharp edge. Try it and see how it works
Forum: rodboard

Yes, that all sounds good. But, be sure to tape on the guides after mounting the reel seat and grips, with the reel and line you will be using and do a stress test under load.
Forum: rodboard

A "turnover" is also called an "spiral wrap" among other names. It simply takes the line from the reel on top of the blank, and we do it in 2 guides, takes the line to the under side of the rod. It is especially helpful on a trolling rod, since it transfers the torque to the under side of the rod. We like the sz 16 stripper guide to help the line path. If you just want
Forum: rodboard