SPONSORS
2024 ICRBE EXPO |
Results 91 - 103 of 103
19 years ago
Mike McGivney
You can use a grey Scotchbrite pad and scuff the finish and apply another coat. Before epoxying, a trick my dad taught me is to spray the surrounding work area lightly with water out of a spray bottle. This helps keep dust to a minimum.
Forum: rodboard 19 years ago
Mike McGivney
92. Re: Butt Wrap
If you like the way it looks....go with it. Nothing is set in stone. Check out some of Rapt Tite's guide wraps. Very creative, and amazing
Forum: rodboard 19 years ago
Mike McGivney
Blue and yellow look good. You could also try blue and green #6779
Forum: rodboard 19 years ago
Mike McGivney
A few weeks ago, someone posted pics of a Matrix blank that he test wrapped. Can't remember the name though.
Forum: rodboard 19 years ago
Mike McGivney
What I do is put the reel on the rod and spin the line roller so that it is 180 degrees away from the rod. Run the line through your guides that are taped on and position the stripper guide where the angle of the line from the reel to the guide is not too severe. Hope this helps.
Forum: rodboard 19 years ago
Mike McGivney
I'm seeing marbelized lamp posts in your future..lol
Putter: That's how I taught my dogs to sit and stay
Forum: rodboard 19 years ago
Mike McGivney
Add a roll to mine...please Thanks again, had a great time Next time I'm wearing cargo pants so that it's easier to steal stuff from your shop...LOL(I'm just kidding, I didn't steal anything)
Forum: rodboard 19 years ago
Mike McGivney
99. Re: Addiction
Hi, my name is Mike, and I'm a Rodaholic..lol
Forum: rodboard 19 years ago
Mike McGivney
As far as the guide question goes, I would static deflect the rod and see if the line passes through without any sharp angles in it. If it looks smooth, then it's fine.
Forum: rodboard 19 years ago
Mike McGivney
I finally got an overhead heater for the garage/workshop. Putter: I know what you mean by spending what we got. My bonus has been long spent, and I didn't even get a new lathe! Happy Holidays
Mike
Forum: rodboard 19 years ago
Mike McGivney
103. Re: MERRY CHRISTMAS
Merry Christmas and Happy Holidays to everyone
Forum: rodboard |